charlie 6 Posted April 1, 2012 Report Share Posted April 1, 2012 I just fixed the links to my post earlier My SEAL-ish Lid. Pls excuse the Rhino arm, it was a freebie and I guess it'll stay on until I can get a TATM MICH2K USGI Goggle Retainers 3hole Norotos with Rhino arm Bolle X800 Skydex 3/4" Pads Im still waiting for a Ops Core H Nape and some IR Tabs/Flags. Also debating whether or not to get bungee's for this Quote Link to post Share on other sites
Johngol10 Posted April 1, 2012 Report Share Posted April 1, 2012 IBH* /w rails & NVG mount custom paintjob 2x US military flag ACU ms2000 strobe* SureFire* light VER II pvs15* /w battery pack* and custom paintjob IR Velcro Safety Lite ----------------------------------------------------------------------------------------------------- *replicas Where'd you get the repo battery pack? Also, does the fake Wilcox arm fit perfectly on that IBH shroud or did you have to mod it? Quote Link to post Share on other sites
Stress Posted April 1, 2012 Report Share Posted April 1, 2012 The battery pack is taken from the cod mw2 nvg and yes, the mount is modded. Quote Link to post Share on other sites
Stress Posted April 1, 2012 Report Share Posted April 1, 2012 updates: FAST CARBON HELMET* w/ Rhino Mount* & Side Railway DE pvs-14* custom paintjob Headset and Helmet Rail Adapter Set /w comtac II headsets Rhino NV metal arms mount / Green Red & Green Velcro Safety Lite ( Class A ) US flag pouch ms2000 strobe* elastic straps (still waiting for a crye multicam helmet cover* and a manta strobe) Quote Link to post Share on other sites
Eugene_Stoner Posted April 7, 2012 Report Share Posted April 7, 2012 This has been finished for a while now, just forgot to post it up. Here's my lid. BAE mich 2001. Wilcox L2 G05 + Lanyard. S&S Precision Manta Strobe. S&S Precision Green + Red V-Lites. Princeton Tec IR MPLS ( really impressed with this) AN/PVS 18 + Wilcox Dovetail Upgrade x2/ LIF/Demist + Orion Filter Not Pictured. IR Flag + IR Tab. Ops Core H-Nape Chinstrap. TX flag Quote Link to post Share on other sites
Section 8 Posted April 7, 2012 Report Share Posted April 7, 2012 Stress, do your Comtacs work mounted backwards like that? At least you'll know if anyone is sneaking up behind you. That's a bad*ss helmet. Very similar to how mine is turning out. Quote Link to post Share on other sites
belair Posted April 9, 2012 Report Share Posted April 9, 2012 Quote Link to post Share on other sites
skyler8158 Posted April 10, 2012 Report Share Posted April 10, 2012 Still needs team wendy pads and bungies/dummy cording... MS2000 isn't taped to the helmet, just covered the sticky side of some velcro with it. Quote Link to post Share on other sites
Thyco Posted April 10, 2012 Report Share Posted April 10, 2012 Here's my attempt to a Norwegian Kejo SF helmet Quote Link to post Share on other sites
SteevoLS Posted April 22, 2012 Report Share Posted April 22, 2012 Repro Airframe Norotos shroud from an Army buddy Contour ROAM EBB Peltor mounts + Howard Leight headset (I plug my radio into this) Tactical 10 year old Quote Link to post Share on other sites
Lightbulb Posted April 22, 2012 Report Share Posted April 22, 2012 My work in progress. Was tan but didn't like the colour so made my first attempt at spraying. Its a clone from ebairsoft (pretty comfortable). Camera is wrapped in sniper tape. Not a great colour match but better than just plain black. Quote Link to post Share on other sites
TheEgo Posted April 22, 2012 Report Share Posted April 22, 2012 Lightbulb Seems a little bit of an odd way of mounting the Contour. Even SteevoLS mount is a little high up. and looks prone to snagging on things I've used one of the low profile mounts. Mounting the camera upside down helps as well Quote Link to post Share on other sites
SteevoLS Posted April 23, 2012 Report Share Posted April 23, 2012 I *do* keep the camera mounted upside down, I just forgot to put it on that way when I took the picture. Otherwise, yeah... feels like you're running around with a fishhook on your head. Quote Link to post Share on other sites
Lightbulb Posted April 23, 2012 Report Share Posted April 23, 2012 (edited) Its mounted on a m6 bolt through the vents in the top to avoid drilling a hole. A steel washer each side and a nut on to keep it in position. Worked well enough yesterday but it is much like running around with a fish hook on my head (I like the mental image of that). I learnt to duck extra low after about 20 minutes of play but I think I shall mount it on the side. Worked well whilst I was in a hurry though and does give a nice wide angle shot mount way up there! --- The basic problem is that the sticky mounts it comes with don't seem to curve right for the shape of the helmet. I think I will either get a ris adaptor or mount it the same but on a hole drilled through the side. Problem is its taller than it is long so ideal I wouldn't use the tripod mount. I could get it closer if I cut down the bolt. I have a tap and die set so I can cut the thread again if it gets messed up cutting it short. Got a few weeks to sort it out anyway as I am not going again for a little while. Edited April 23, 2012 by Lightbulb Quote Link to post Share on other sites
Scuffer Posted April 23, 2012 Report Share Posted April 23, 2012 (edited) Do you realise there is a dedicated Contour mount made by Ops Core? Means your camera will click directly onto the rails on the side of your helmet. Edited April 23, 2012 by Scuffer Quote Link to post Share on other sites
Lightbulb Posted April 23, 2012 Report Share Posted April 23, 2012 Good to know thanks. Any where in the UK stock them? But its another £15+... I'll think about it. Quote Link to post Share on other sites
Scuffer Posted April 23, 2012 Report Share Posted April 23, 2012 Ebay and any of the places that Level Peaks now supply. £15+ to secure a £150+ camera is simple maths Quote Link to post Share on other sites
Lightbulb Posted April 23, 2012 Report Share Posted April 23, 2012 Yes that is true true but I would trust a 40mm washer and 6mm steel bolt just as much as the plastic rails. Quote Link to post Share on other sites
Maveric Posted April 27, 2012 Report Share Posted April 27, 2012 Soon to have a Contour HD and Rhino arm on it. Quote Link to post Share on other sites
Interficium Posted April 27, 2012 Report Share Posted April 27, 2012 Just a heads up that ebairsoft put up arc rail adaptors for sordins today. http://www.ebairsoft.com/combat-gear-goggles-mask-communication-c-62_39.html Quote Link to post Share on other sites
Extraordinaire Posted April 27, 2012 Report Share Posted April 27, 2012 Looks like I'll be needing some Sordins then. Didn't ebAirsoft release the OD version of the Sordins not too long ago? Repainted my FAST replica. -Ex Quote Link to post Share on other sites
Skintband Posted April 29, 2012 Report Share Posted April 29, 2012 Dragon Red Ops Core ballistic Helmet, with Ranger Green First Spear Helmet Cover and ESS Profile Turbo Fan goggles, Princeton Light with Blue Filter. Quote Link to post Share on other sites
uscmCorps Posted April 30, 2012 Report Share Posted April 30, 2012 I'm liking that cover! Curious if that head lamp will catch on doors though. Have you considered using the Princeton Tec MPLS instead? Quote Link to post Share on other sites
findiboy16 Posted April 30, 2012 Report Share Posted April 30, 2012 Soon to have a Contour HD and Rhino arm on it. thats very pretty where can i get a pro-tec with that cut, ? Quote Link to post Share on other sites
Maveric Posted April 30, 2012 Report Share Posted April 30, 2012 it was brought from http://www.pthelmets.com/ really good fast service. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.