swannie_2006 Posted December 15, 2009 Report Share Posted December 15, 2009 ... and those new mags are already sould out on redWolf and WGCshop. Quote Link to post Share on other sites
swannie_2006 Posted December 15, 2009 Report Share Posted December 15, 2009 Alrighty, I just got confirmation that these G&P mags ARE actually Green Gas ready: Hello Roland, G&P inform us it can use Taiwan green gas ,in HK all player use green gas in this MG. Regards Now if I had 200 USd to spare on 4 of these babies. Quote Link to post Share on other sites
ThaFlash Posted December 15, 2009 Report Share Posted December 15, 2009 I'll believe it when I see it. Retailers and manufacturers will say anything to get people to buy. WA mags work with green gas, they can use green gas. They just use it very poorly. It would probably be much safer to buy 1 than 4. Quote Link to post Share on other sites
tinydata Posted December 16, 2009 Report Share Posted December 16, 2009 What would you guys recommend for an aftermarket outer barrel? I currently have a 10.5 inch stock G&P barrel, but I want a 14.5 inch setup. (G&P delta ring, G&G KAC RIS) I do have a barrel extension but it is 14mm negative. I have seen the Pro-Arms 5 piece barrel and the Guarder barrel. Do they fit? Otherwise...if you have a spare G&P 14.5 inch barrel (steel or aluminum), I'm interested! Thanks. Quote Link to post Share on other sites
Luis21 Posted December 16, 2009 Report Share Posted December 16, 2009 What would you guys recommend for an aftermarket outer barrel? I currently have a 10.5 inch stock G&P barrel, but I want a 14.5 inch setup. (G&P delta ring, G&G KAC RIS) I do have a barrel extension but it is 14mm negative. I have seen the Pro-Arms 5 piece barrel and the Guarder barrel. Do they fit? Otherwise...if you have a spare G&P 14.5 inch barrel (steel or aluminum), I'm interested! Thanks. You can just try buying a clockwise 4'' extension. The Steel convertible 5KU barrel is also good. -Luis Quote Link to post Share on other sites
swannie_2006 Posted December 16, 2009 Report Share Posted December 16, 2009 Otherwise...if you have a spare G&P 14.5 inch barrel (steel or aluminum), I'm interested! Thanks. Hey Tinydata, I happen to have an aluminum 14.5" outer barrel that I don't use. It came with my M4A1. PM me if you are interested. Quote Link to post Share on other sites
tinydata Posted December 16, 2009 Report Share Posted December 16, 2009 Luis, can you point me in the direction of a clockwise extension? I can only find negative ones. Swannie, PM inbound! Also, are the G&P barrel nuts loctited? I can't get mine off with pliers Quote Link to post Share on other sites
-=OGGY=- Posted December 17, 2009 Report Share Posted December 17, 2009 Use a proper AR15 tool; it will save you time and trouble. Quote Link to post Share on other sites
PPM05 Posted December 23, 2009 Report Share Posted December 23, 2009 Do you guys have any Idea where I can get another (extra) upper receiver for my G&P WOC M4A1 ? Quote Link to post Share on other sites
tinydata Posted December 25, 2009 Report Share Posted December 25, 2009 I'd love to know that too...can't seem to find any extra uppers. If I buy a G&P body kit, does someone want the lower and I'll take the upper? lol Quote Link to post Share on other sites
PPM05 Posted December 26, 2009 Report Share Posted December 26, 2009 I guess that's the only way to do it tiny If you want I can take your upper and you can keep the lower receiver haha Quote Link to post Share on other sites
hitmanNo2 Posted December 27, 2009 Report Share Posted December 27, 2009 (edited) Anyone have any problems with the JDT bolt carriers in WOCs? I don't think I've seen any mention of any and I've seen some people with the in WOCs so I know they should be OK. The upper doesn't seem to want to close down when I put it in. Also, the nozzle doesn't move freely. Is there a guide anywhere that notes how to prep it before use? Looks like I found a good section on the JDT bolt carrier in the AGM review thread. Hopefully that will help somewhat. Edited December 27, 2009 by hitmanNo2 Quote Link to post Share on other sites
RacingManiac Posted December 27, 2009 Report Share Posted December 27, 2009 I guess that's the only way to do it tiny If you want I can take your upper and you can keep the lower receiver haha I ended up buying a whole kit for the upper alone. Did find a buyer for the lower. Its still cheaper than just the upper for a Prime I guess... Quote Link to post Share on other sites
ThaFlash Posted December 27, 2009 Report Share Posted December 27, 2009 Just added KNS pins and a KAC ambi mag release to my WOC. The mag release took quite a bit of work to get it operating properly both withing the WOC body and then with the KNS pins. Quote Link to post Share on other sites
RacingManiac Posted December 29, 2009 Report Share Posted December 29, 2009 Looks sweet, might make the ambi-function better with a BAD lever... Quote Link to post Share on other sites
ThaFlash Posted December 29, 2009 Report Share Posted December 29, 2009 Been thinking about the BAD lever but it would definitely get in the way of my index finger since I'm a lefty. I think the ACLM charging handle is going to be the next big RS part that goes on my gun. But I'm seriously considering a Prime body conversion. Quote Link to post Share on other sites
RacingManiac Posted December 29, 2009 Report Share Posted December 29, 2009 hahah....all the sweet new Prime and Bomber upper coming out makes me want to build another GBBR, but all the new stuff I'll need to buy for it deters the ###### out of me...lol Really want to build a PSD type short AR with the new Bomber MUR and the STAG Prime lower....but I still need to finish my 16" upper for the WOC that I have... BAD basically ensures your gun becomes a righty gun, not a problem for me being a rightly, but probably not good if your are a lefty... Quote Link to post Share on other sites
rvp69 Posted January 10, 2010 Report Share Posted January 10, 2010 any one having problems with there GHK mags? not leaking (as mine havent) my nozzel seems to smack into the plastic two prong part of the mag causing it to crack over time and not being able to retain the bb's, im thinking of filing it down (not the nozzel) the mag.Any one had this problem? Quote Link to post Share on other sites
RacingManiac Posted January 11, 2010 Report Share Posted January 11, 2010 does your mag fit the magwell properly or is it still snug and you need to shove it in and pull it out when you change mag? I think if the GHK mag is tight, you may be able to put the mag in higher than it otherwise can, since gravity can't pull it down. Quote Link to post Share on other sites
rvp69 Posted January 11, 2010 Report Share Posted January 11, 2010 does your mag fit the magwell properly or is it still snug and you need to shove it in and pull it out when you change mag? I think if the GHK mag is tight, you may be able to put the mag in higher than it otherwise can, since gravity can't pull it down. yea still a bit tight and i have tried to push it up as far as it will go..but still the same result ? Quote Link to post Share on other sites
RacingManiac Posted January 11, 2010 Report Share Posted January 11, 2010 It needs to sit lower, since regularly I think the mag sits lower in the catch, but since the mag is tight it won't "settle".... Just a guess though, it could just be that the GHK's tolerance is not well controlled and your feed lip is too tall, but knowing they are snug fitting mag I can see that happening... Quote Link to post Share on other sites
rvp69 Posted January 11, 2010 Report Share Posted January 11, 2010 yea i pull it down to the lowest of what the mag catch allows, i think if i file a bit off the mag bb retainer,it may miss it entirely? will post up progress.... Quote Link to post Share on other sites
stirrat Posted January 11, 2010 Report Share Posted January 11, 2010 (edited) Anyone have any problems with the JDT bolt carriers in WOCs? I don't think I've seen any mention of any and I've seen some people with the in WOCs so I know they should be OK. The upper doesn't seem to want to close down when I put it in. Also, the nozzle doesn't move freely. Is there a guide anywhere that notes how to prep it before use? Looks like I found a good section on the JDT bolt carrier in the AGM review thread. Hopefully that will help somewhat. Apart from being very heavy an sluggish during shooting, its pretty crappy imo, Prime or Ra-tech bolt ftw. To get the nozzle moving more freely, you need to clean and grease/silicone the o-ring up real good, i did this and it moves great. As for the upper not closing, i also had that but something clicked and it started closing, one thing could be the buffer, so try it without, then try work out from there. Edited January 11, 2010 by stirrat Quote Link to post Share on other sites
stirrat Posted January 11, 2010 Report Share Posted January 11, 2010 any one having problems with there GHK mags? not leaking (as mine havent) my nozzel seems to smack into the plastic two prong part of the mag causing it to crack over time and not being able to retain the bb's, im thinking of filing it down (not the nozzel) the mag.Any one had this problem? I think i know your problem. From the start, the design of the mag feed lips isn't geat, a thin piece of plastic holds the lips together at the front, which is prone to breaking, here are some pics to show some what i mean. problem solution I've done this for mine and it worked, its just wedging a small thin piece of plastic down the side, which pushes the lips together. Quote Link to post Share on other sites
rvp69 Posted January 11, 2010 Report Share Posted January 11, 2010 I think i know your problem. From the start, the design of the mag feed lips isn't geat, a thin piece of plastic holds the lips together at the front, which is prone to breaking, here are some pics to show some what i mean. problem solution I've done this for mine and it worked, its just wedging a small thin piece of plastic down the side, which pushes the lips together. Excellent mate,thanks for that... but i still want to address the problem of the bolt hitting it in the 1st place, did you address that at all? because when the bolt carrier pauses,the bolt does not return in time witch causes it to dispel the gas prematurely, any ideas? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.