Ivan le Fou Posted February 11, 2012 Report Share Posted February 11, 2012 It looks extremely good. Quote Link to post Share on other sites
atomicaardvark Posted February 13, 2012 Report Share Posted February 13, 2012 RacingManiac - is that a Larue (replica?) 1.5 or 1.93 SPR mount? Quote Link to post Share on other sites
RacingManiac Posted February 13, 2012 Report Share Posted February 13, 2012 (edited) Genuine SPR 1.5. Edited February 13, 2012 by RacingManiac Quote Link to post Share on other sites
atomicaardvark Posted February 13, 2012 Report Share Posted February 13, 2012 (edited) How well does it work with the short dot and PEQ? Edited February 13, 2012 by atomicaardvark Quote Link to post Share on other sites
RacingManiac Posted February 13, 2012 Report Share Posted February 13, 2012 The PEQ is visible in the tube at the 1x. Its in the lower 15%-20% of the FOV. But you would have no issue using the optic. At anything with magnification you don't notice it at all... Accupoint TR24 has a eye relief of 3.2", which the way I am shooting I have no issue using it at 1x as a reflex sight even with stock at full collapse. But it works better with the stock at position 2 or 3 if you are shooting closer to 4x, so that is where I usually leave it. If you shoot really close with your nose to the charging handle, or have a scope with longer eye relief, you might want to think of using SPR-E instead. Quote Link to post Share on other sites
Whitehawk Posted February 20, 2012 Report Share Posted February 20, 2012 Hmm.. Could this be get any better? Systema PTW Mk12 mod 1 MAX. - Runs with M150 cylinder. Realsword SVD. - This has M160 internals, but I bet it shoots bit more.. 1 Quote Link to post Share on other sites
EngageNZL Posted February 22, 2012 Report Share Posted February 22, 2012 (edited) And here is my own AEG DMR in the form of one very highly tuned CA AUG A1. To be honest I don't know exactly what parts are in this gun, as its about 6 years old and has 3 owners in total. All I know is that it has the PDC(?) hop unit in it, Guarder gearbox internals and a PDI tightbore. Tightbore runs to just inside the standard flashhider, which was removed in order to mount the silencer, which works like a charm apparently. ~15m shot, target didn't hear it. Running at 380 on 0.28s. Longest confirmed kill at 360 feet. It's the rifle being used in this pic taken at the NZ Nationals recently. Edited February 22, 2012 by EngageNZL Quote Link to post Share on other sites
Whitehawk Posted February 24, 2012 Report Share Posted February 24, 2012 Bohoo.. I didnt get enough attention! So double or nothing! RS SVD and S&T SVD 2 Quote Link to post Share on other sites
SteevoLS Posted February 24, 2012 Report Share Posted February 24, 2012 Given the price difference, would you take the S&T over the RealSword, or vice versa? Quote Link to post Share on other sites
Whitehawk Posted February 24, 2012 Report Share Posted February 24, 2012 Ummh.. Well I would take the one I could afford. S&T is cheaper, and you can feel it, but its still a good replica. Both are good for their price. For some more pictures of both, check this url: http://honkki.kuvat.fi/kuvat/Arsenaali/RS+vs+ST/ Quote Link to post Share on other sites
l96ninja Posted February 25, 2012 Report Share Posted February 25, 2012 EngageNZL, what's the zoom on that scope? Quote Link to post Share on other sites
EngageNZL Posted February 26, 2012 Report Share Posted February 26, 2012 Just 1.5. Does the job for me. Means I can still acquire targets easily at relatively short range, where I do most of my hunting, but I can also adequately identify targets at a decent range. Quote Link to post Share on other sites
psantos Posted February 26, 2012 Report Share Posted February 26, 2012 (edited) I have totake better pictures but Edited February 26, 2012 by psantos Quote Link to post Share on other sites
Anfrax666 Posted February 26, 2012 Report Share Posted February 26, 2012 For those Snowsoft occassions... Started out as a JG UFC model, before the fluted barrel and gas block were available in polished steel as after market! And just because i can .... JG Steyr Aug with H-bar kit and custom drum mag! Quote Link to post Share on other sites
druid799 Posted February 27, 2012 Report Share Posted February 27, 2012 and heres my TM EBB Sopmod "dressed" like an L129A1 ; Quote Link to post Share on other sites
Anfrax666 Posted February 27, 2012 Report Share Posted February 27, 2012 @Druid is that a real 6x acog ? Quote Link to post Share on other sites
druid799 Posted February 27, 2012 Report Share Posted February 27, 2012 @Druid is that a real 6x acog ? Love to say yes but it's a dressed up 4x's ACOG Quote Link to post Share on other sites
Anfrax666 Posted February 27, 2012 Report Share Posted February 27, 2012 Blooming good effort, hard to tell from the pics. Quote Link to post Share on other sites
Lajjvo Posted February 27, 2012 Report Share Posted February 27, 2012 Very nice gun indeed. I agree with Anfrax. Quote Link to post Share on other sites
WestyIII Posted March 28, 2012 Report Share Posted March 28, 2012 Cheeky update: SAM_0395 by WestyIII, on Flickr Whats that? SAM_0396 by WestyIII, on Flickr Closer! SAM_0394 by WestyIII, on Flickr SAM_0397 by WestyIII, on Flickr SAM_0398 by WestyIII, on Flickr Omnomnom. 1 Quote Link to post Share on other sites
CALLAHAN_88 Posted March 28, 2012 Report Share Posted March 28, 2012 Real nice gun there! Quote Link to post Share on other sites
Slayer750 Posted March 28, 2012 Report Share Posted March 28, 2012 That is amazing, Westy! How much did the custom engraving cost, if you don't mind me asking? Also, what base is that, A&K? 1 Quote Link to post Share on other sites
WestyIII Posted April 2, 2012 Report Share Posted April 2, 2012 Not too bad, its getting the design which is expensive. My L129 is based on the G&P SR25k. Quote Link to post Share on other sites
Lax Posted April 2, 2012 Report Share Posted April 2, 2012 Ratech custom and G&P Woc DMRs Quote Link to post Share on other sites
findiboy16 Posted April 8, 2012 Report Share Posted April 8, 2012 pretty poor compared to whats already here but sharpshooter rifle work in progress Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.