QDRenegade Posted March 8, 2013 Report Share Posted March 8, 2013 Just received my Atlas, build quality is pretty good. Pretty good? Accushot bipods are supposed to make even the Borbo Engineering models feel flimsy. Just not for me at $300. Im curious how the 5KU replica feels. In particular, the one from EBB. Quote Link to post Share on other sites
Ivan le Fou Posted March 8, 2013 Report Share Posted March 8, 2013 Mine is the EBB. It is pretty sturdy to say the least. Looks solid, but it needs to be greased especially the locking mechanism. And don't expect deploying it as fast as a Harris bipod. Quote Link to post Share on other sites
QDRenegade Posted March 8, 2013 Report Share Posted March 8, 2013 Mine is the EBB. It is pretty sturdy to say the least. Looks solid, but it needs to be greased especially the locking mechanism. And don't expect deploying it as fast as a Harris bipod. Oh my mistake - I thought you were referring to a genuine Atlas unit. Im not particularly happy with my Harris so this will be interesting. Did it ship with the ADM style mount? Quote Link to post Share on other sites
Ivan le Fou Posted March 8, 2013 Report Share Posted March 8, 2013 No it was not. I was a bit surprised about that actually. Quote Link to post Share on other sites
QDRenegade Posted March 8, 2013 Report Share Posted March 8, 2013 No it was not. I was a bit surprised about that actually. Mother*fruitcage*ers. And its too late to cancel. I hope he likes returns or Paypal disputes Quote Link to post Share on other sites
Ivan le Fou Posted March 8, 2013 Report Share Posted March 8, 2013 Well I have just mailed them to know why the mount is different. If it is normal or what. Depending on that: paypal dispute or not. Quote Link to post Share on other sites
Legionnaire759 Posted March 9, 2013 Report Share Posted March 9, 2013 2 Quote Link to post Share on other sites
Jolas Posted March 12, 2013 Report Share Posted March 12, 2013 (edited) Hello peopleI have a question, I have an ICS Sportline M16 RAS and intend trasnformar in a SPR MK12 Mod 0, i know this is a tread for showing our DMR's, but i realy need help I bought the kit a few days and over the weekend I tried to assemble the kit but without success, Hopup chamber of ICS not outbarrel went well in the front so had to hold gas pipe around outbarrel.I do not know the brand of kit, but when I bought it said it was compatible with ICS.Thank you, all help is welcome Edited March 12, 2013 by Jolas Quote Link to post Share on other sites
DarkLite Posted March 12, 2013 Report Share Posted March 12, 2013 Pictures would be helpful. Quote Link to post Share on other sites
Jolas Posted March 13, 2013 Report Share Posted March 13, 2013 (edited) this is the kit http://img594.imageshack.us/img594/7852/20130307123829.jpg Edited March 13, 2013 by Jolas Quote Link to post Share on other sites
Wild_XIII Posted March 13, 2013 Report Share Posted March 13, 2013 This is my work in progress. I need to get it to shoot properly first though. Quote Link to post Share on other sites
FTZ-WildeCard Posted March 13, 2013 Report Share Posted March 13, 2013 I saw that on FaceBook. I like it all, except I can't get over the pistol grip... I'm guess I'm just used to see A2 grips all over the place, which this one sort of looks like, but not... Good luck fixing it though! Will be awesome once it's back on its feet. Quote Link to post Share on other sites
Wild_XIII Posted March 13, 2013 Report Share Posted March 13, 2013 Cheers dude, I chucked an M100 and a different hop unit in there last night. Now the *bramston pickle* just jams with the hop all the way off! It will work properly again, it just needs some time. Quote Link to post Share on other sites
[NL]Infinity Posted March 13, 2013 Report Share Posted March 13, 2013 This is my work in progress. I need to get it to shoot properly first though. Is it the complete G&P replica or the conversion-kit? Bought a G&P DMR in pieces a while back, which according to the previous owner, had feeding issues out of the box (with the original G&P mag). Wonder if you had the same issues. Cheers! Quote Link to post Share on other sites
kojak Posted March 13, 2013 Report Share Posted March 13, 2013 Cyma based EBR: After replacing most of the internals I'm finally satisfied with the performance. There's an HK battle grip on the way, and I'd prefer nicer rings, other than that it's complete. Quote Link to post Share on other sites
Wild_XIII Posted March 13, 2013 Report Share Posted March 13, 2013 Is it the complete G&P replica or the conversion-kit? Bought a G&P DMR in pieces a while back, which according to the previous owner, had feeding issues out of the box (with the original G&P mag). Wonder if you had the same issues. Cheers! It's a complete G&P gun. It feeds perfectly, however I've been having issues first of all where the FPS was really inconsistent. So I took it apart and worked my magic on it and now it's shooting around 280 FPS when it was originally 360. So I've done further work on it and now I need to change the hop rubber back as the one I put in there is just jamming the BB's. It shot OK when I first got it. It was just the inconsistent FPS that made shots miss target because I was constantly having to figure out whether it was going to hop the BB properly or not. I'll get another hop rubber and give it another go. Quote Link to post Share on other sites
Oshiha Posted March 14, 2013 Report Share Posted March 14, 2013 Cyma based EBR: After replacing most of the internals I'm finally satisfied with the performance. There's an HK battle grip on the way, and I'd prefer nicer rings, other than that it's complete. Nice.. What internals did you put in and what were the results? I'm looking to get the CYMA EBR as well Quote Link to post Share on other sites
kojak Posted March 14, 2013 Report Share Posted March 14, 2013 (edited) It's not a bad gun, but the motor seems slow even with 11.1V at the low (around 1.2J) stock power level. The airseal is poor at the nozzle and piston head, but I can't say if it would make more power with just better seals since I did all the work at once--the V7 is a pain to reassemble and I don't plan on opening it again. Guts: Ultra torque long motor (FYI, the collar must be removed to fit the cage), 14 steel tooth piston (no 2nd tooth), piston head, nozzle, M140 spring, 21:1 gears--all from SHS. The stock cylinder and cylinder head were reused, with sorbothane in place of the rubber pad. Reshimmed and relubed, of course. I've used the Guarder lubes lately with good results. Outside the shell: Infected Armory MOSFET, 6.03 barrel with shaved Prometheus purple bucking and reshaped Firefly nub. Results: 2.3J and a decent trigger response. Scored an average of 8/10 hits on my 100 yard pie pan (Madbull .40g, fired from the bench). Edited March 14, 2013 by kojak 1 Quote Link to post Share on other sites
XON50 Posted March 17, 2013 Report Share Posted March 17, 2013 this is one of my favourite threads, so i figure i would contribute. this is my WE GBB M4. 2 Quote Link to post Share on other sites
Probotector Posted March 24, 2013 Report Share Posted March 24, 2013 Haven't finished the gearbox but I'm happy to have it at least assembled together. Classic Army / Quality Power SA58 Quote Link to post Share on other sites
ollie_ty Posted March 24, 2013 Report Share Posted March 24, 2013 Probo, PM me if youre interested in a proper ITC Cheekrest ( The ones sold on DS Arms website for the SA58s) Quote Link to post Share on other sites
validtumoralarm Posted March 24, 2013 Report Share Posted March 24, 2013 Got a new optic and barrel for my VFC Mk.17. Now I just need to finish working on the guts. 1 Quote Link to post Share on other sites
Probotector Posted March 25, 2013 Report Share Posted March 25, 2013 Probo, PM me if youre interested in a proper ITC Cheekrest ( The ones sold on DS Arms website for the SA58s) Thanks, but I like the one I currently have more. Quote Link to post Share on other sites
Oshiha Posted April 1, 2013 Report Share Posted April 1, 2013 Gun is not quite done yet, but its been 3 months since I got the base gun! The parts list are: G&P Sentry Madbull Dragonfire 16" rail system G&P M16A2 stock G&P sniper grip Prometheus 455mm 6.03 TBB Prowin hop up chamber rhop + modify flat nub Modify piston Siegetek 14.09:1 single sector gears Lonex A2 motor Low-resistance wiring Extremefire Cheetah 2N mosfet and a 11.1v 3200mah 35C lipo Quote Link to post Share on other sites
wolfgeorge Posted April 12, 2013 Report Share Posted April 12, 2013 Top to bottomRS SVD w/P* engineEscort SVD GBBRS SVD AEGWolf 2 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.