Jump to content
Redhawk

Revolver Picture Thread

Recommended Posts

Yep, a Marushin 9.5in Super Redhawk.

 

Also, it comes with the scope mounts, but not the scope.

You can get a weaver rail for about $40 or 1" or 30mm rings for ~$25.

 

:thumbs-up:

That is one sexy gun!

Share this post


Link to post
Share on other sites
That is one sexy gun!

 

Thanks!

 

I'm planning on getting a weaver rail for it eventually and slapping a reddot on it.

Also, I might try and fit some real steel grips on it one day (as they're not a direct fit).

 

:thumbs-up:

Share this post


Link to post
Share on other sites

They won't fit, the gas cylinder is in the grip. The real steel has a pretty unique grip fitment, instead of a frame withe the spring in the middle it has a long stud down the centre and the grip slides over this and bolts upwards.

Share this post


Link to post
Share on other sites

Is there anyway to get a casyeopia (sp?) still or are they now dust in the wind?

 

I really wish I hadve bought one when they came out, didnt quite anticipate them to get banned so swiftly :|

Share this post


Link to post
Share on other sites
They won't fit, the gas cylinder is in the grip. The real steel has a pretty unique grip fitment, instead of a frame withe the spring in the middle it has a long stud down the centre and the grip slides over this and bolts upwards.

 

Yeah, I figured it'd take alot of modification.

 

I was planning on boring out some oversized wood grips to fit the gas reservoir and drill holes on the sides to fit the stock Marushin grip's brass washers and screws.

 

But I guess I'll just hold this small project off for now, though and save up for the rail instead.

 

:thumbs-up:

Share this post


Link to post
Share on other sites
Is there anyway to get a casyeopia (sp?) still or are they now dust in the wind?

 

I really wish I hadve bought one when they came out, didnt quite anticipate them to get banned so swiftly :|

 

They can still be found used some places. I have an extra set of shells for a Cassi M500 that I'm looking to sell on right now.

_______________________

 

T0p Sp!N - That Marushin 9.5in Super Redhawk is brilliant. If you ever decide to pass it one drop me a PM. I'd love to have a chance to pick something like that up.

 

Share this post


Link to post
Share on other sites

I find it pretty sad the Casyopea's got banned, the argumentation for it was just silly.. name just one thing in this world that woulden't become dangerous if you fill it up with gunpowder :rolleyes:

 

I wish i had gotten a full metal SAA whilst i could, but still, since they got banned, it woulden't have been a big plus, as spare parts and new shells are going to be impossible to come by soon enough.

Share this post


Link to post
Share on other sites

Speaking of Cassi goodness...

_____________________

 

Here's a few starter pictures of my new Tanaka Cassiopeia M500. I need to work on the orange but for the moment I thought it would be worth putting up a few before pictures. I haven't had time to test the power/accuracy of this gun yet but it has a lot more potential than the Cassi SAA does (I own both now). I also got 15 shells with this gun which is kind of fun. The whole thing is just ridiculously huge. Until you have held one in person you really cannot grasp the size (from just looking at pictures).

 

m5004e.jpg

 

m5002.jpg

 

m5003.jpg

 

m5001.jpg

Share this post


Link to post
Share on other sites
So dissapointing the Dan Wesson name appears on that piece of *suitcase*.

 

 

Cheers RM, thats just i.d.ed the grips i've got on my S&W M66

 

 

very charming of you...

 

i presume you haven't actually seen one of these then, its a nice solid, heavy revolver and performs very well. theres no hopup on it though.

Share this post


Link to post
Share on other sites

Yeah I guess, nothing personal but it looks nothing like a Dan Wesson, and I always loved em. Used to shoot one of their .357 in the 80's, fancied one of their Supermags but bought a 3" Smith .44 instead.

Edited by BigAl

Share this post


Link to post
Share on other sites
Speaking of Cassi goodness...

_____________________

 

Here's a few starter pictures of my new Tanaka Cassiopeia M500. I need to work on the orange but for the moment I thought it would be worth putting up a few before pictures. I haven't had time to test the power/accuracy of this gun yet but it has a lot more potential than the Cassi SAA does (I own both now). I also got 15 shells with this gun which is kind of fun. The whole thing is just ridiculously huge. Until you have held one in person you really cannot grasp the size (from just looking at pictures).

 

*Sigh*

 

I had the chance to get one of those too as I was in the market for an M500 when they came out. Went with the standard (alright not so standard, midnight blue!) version because at that point everyone was unsure how HMG would react.

 

Turns out they were fine here in the UK but got banned before I could pick one up!

Still, very happy with my normal version! Its fairly hard to skirmish with a revolver anyway so one with shells would have been a nightmare!

 

Wings :detective2:

Edited by angel_wings

Share this post


Link to post
Share on other sites
A couple of pics of the new revolver i picked up the other day. Its all metal with a nice hard wearing finish and heavy weight. rubberized grip etc.

 

Where can you get these?

Share this post


Link to post
Share on other sites
They can still be found used some places. I have an extra set of shells for a Cassi M500 that I'm looking to sell on right now.

_______________________

 

T0p Sp!N - That Marushin 9.5in Super Redhawk is brilliant. If you ever decide to pass it one drop me a PM. I'd love to have a chance to pick something like that up.

 

Sure, I'll keep you in mind.

 

And my new acquisition:

New and Old.

 

dsci00032.jpg

 

WE1911 and Tanaka SAA (old US/Export version I believe)

You wouldn't believe how much I got the Tanaka for...

 

:thumbs-up:

Share this post


Link to post
Share on other sites
Where can you get these?

they are called WG (win gun) revolvers. im guessing you can only get them with markings like that in korea, but in the US you can find them at ASGI, Evike and a couple other, less known, shops.

 

they perform oddly well with .25s even without hop up. mostly its because of being over powered (the 6inch model shoots over 450). but, i was thinking of modifying a 4 inch model with a WE M4 barrel as the hop up wraps around flush with the barrel. the WE M4 barrel is prim to stick into alot of hop up lacking, gas guns. the shells and speed loaders are available separately (find them by searching in google now that you know their name) and are relatively inexpensive (i think 14 bucks for a pack of 6 shells and 17 for a speed loader)

 

dont get the 8 inch model. its actually a 4.5mm pellet gun, no matter what the page says.

 

the 6 inch version has a different gas system than the 4 inch version. thats why the 6 inch version is so much more powerful.

Edited by Horsem4n

Share this post


Link to post
Share on other sites
they are called WG (win gun) revolvers. im guessing you can only get them with markings like that in korea, but in the US you can find them at ASGI, Evike and a couple other, less known, shops.

 

they perform oddly well with .25s even without hop up. mostly its because of being over powered (the 6inch model shoots over 450). but, i was thinking of modifying a 4 inch model with a WE M4 barrel as the hop up wraps around flush with the barrel. the WE M4 barrel is prim to stick into alot of hop up lacking, gas guns. the shells and speed loaders are available separately (find them by searching in google now that you know their name) and are relatively inexpensive (i think 14 bucks for a pack of 6 shells and 17 for a speed loader)

 

dont get the 8 inch model. its actually a 4.5mm pellet gun, no matter what the page says.

 

the 6 inch version has a different gas system than the 4 inch version. thats why the 6 inch version is so much more powerful.

 

 

I have both the 4 inch and the 8inch and both are 6mm airsoft guns, not 4.5mm. they both use the same system too but being that the 8inch has a longer barrel, it will get more power than the shorter one. these are sub 1J ones but the same still apply s.

Share this post


Link to post
Share on other sites
Nice SSA. How much did you get it for then?

 

$26 shipped...!

 

The one issue though is that it doesn't cycle all the time, but I like a technical challenge.

If anything, it'll be a wallhanger.

 

:thumbs-up:

Share this post


Link to post
Share on other sites

i wish i could be so lucky to get $26 an hour...

 

I have both the 4 inch and the 8inch and both are 6mm airsoft guns, not 4.5mm. they both use the same system too but being that the 8inch has a longer barrel, it will get more power than the shorter one. these are sub 1J ones but the same still apply s.

well, the ones in america are different i guess.

Edited by Horsem4n

Share this post


Link to post
Share on other sites
You swine. thats a hours wage :P

 

I wish i could be so lucky

 

Heh heh heh...

 

I think the main reason no one else jumped on that deal was because the seller (on another board TSNBN) had 2 posts!

So, I took a chance. It was through Paypal, too though.

 

Now, to save up for some metal body parts.

 

:thumbs-up:

Share this post


Link to post
Share on other sites

:P

 

 

Tanaka Works Colt Python 4" Steel Finish...

 

ColtPython8_med.png

 

 

ColtPython1_med.png

 

 

ColtPython6_med.png

 

 

ColtPython3_bw_med.png

 

 

 

 

 

 

 

Slainte!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.