RGJ Posted February 12, 2009 Report Share Posted February 12, 2009 There in the uk at £1250 .... shocking m8 ckick on link an scroll down and sit down lol http://www.landwarriorairsoft.com/acatalog/Gas_Rifles.html rgj out Quote Link to post Share on other sites
Viking Posted February 12, 2009 Author Report Share Posted February 12, 2009 Pics from the field: Quote Link to post Share on other sites
Trasher Posted February 12, 2009 Report Share Posted February 12, 2009 I won't rush to bore out the piston... I'd go to a spring maker and get custom springs made. It's easy and cheap (at least here). Quote Link to post Share on other sites
Viking Posted February 12, 2009 Author Report Share Posted February 12, 2009 I am expecting a PDI VSR-10 360 fat spring today (I was told its 13mm OD and 11mm ID ) as I couldn't find any PDI SS springs with any US retailer. I will definitely hold off on boring the piston till I try a few different springs. I can bore out any time, if nothing works, as I have a mini-lathe and a mini-mill. I will keep you all posted if that fits or not and the fps with that spring. Viking Quote Link to post Share on other sites
noodels Posted February 13, 2009 Report Share Posted February 13, 2009 (edited) order springs directly from PDI , thats what I did In fact I order everything PDI from PDI home page. Edited February 13, 2009 by noodels Quote Link to post Share on other sites
The Late Great Isamu Posted February 15, 2009 Report Share Posted February 15, 2009 Can't wait to hear the details on this guns performance. Depending on how well it performs I think I found my next toy! Quote Link to post Share on other sites
docs90 Posted February 15, 2009 Report Share Posted February 15, 2009 Ok , i was lucky enough to get to have a little play with one of these today .. And Im so glad i didnt pay £1200 for it , not impressed at all , ive seen bar 10s and stock warrier l96s perform better Sorry for doing this but guys as much as it might look the nuts the one i played with was poor (glad it wasnt my money ) Quote Link to post Share on other sites
RUSHER2 Posted June 22, 2009 Report Share Posted June 22, 2009 $1,400... Considering I paid under $600 for my DSR-1, I don't know if I could warrant spending more than double that on the M200. Plus... Evike's pretty horrible to deal with. Last time I bought something from them, it was out of stock, and when getting my refund back they refused to refund my taxes because they "don't refund taxes on web based sales". After repeatedly explaining to the sales associate that being that I hadn't actually bought anything, they're required by law to refund my taxes, they did eventually do so. And on a prior order it took them close to 2 months to ship something that was "in stock" and only a few counties away. They're so clueless about general business practices, I swore them off permanently. Haha then you havent been to there store yet. they wont even look at you if you dont have money out waving it around i waited like 35 mins to be helped with 3 people in the store.. Quote Link to post Share on other sites
TeowneD Posted June 30, 2009 Report Share Posted June 30, 2009 thats a freaking awesome gun! but i would much prefer it to hav a OD paint job. i saw it in the shops at hong kong and its really big, how heavy is it? its gotta be really hard to lug it round the skirmish site and get to a firing position. freaking nice gun though! Quote Link to post Share on other sites
iaamagnum Posted July 12, 2009 Report Share Posted July 12, 2009 amazing rifle and awesome nv scope. im truly jealous Quote Link to post Share on other sites
Nutek Posted July 15, 2009 Report Share Posted July 15, 2009 I wish these weren't so pricey Wicked rifle. Quote Link to post Share on other sites
KMFDM Posted July 23, 2009 Report Share Posted July 23, 2009 Holy ###### I'm jealous! One of few american guns that I actually want! Looking forward to your field testing and review. Does it feel sturdy and skirmishable btw? Quote Link to post Share on other sites
babybackribs Posted July 26, 2009 Report Share Posted July 26, 2009 Very nice. I might have to consider selling my VFC M82A1 to get one of these. Quote Link to post Share on other sites
kustom Posted August 4, 2009 Report Share Posted August 4, 2009 nice dude, very nice. Quote Link to post Share on other sites
yakuza Posted August 16, 2009 Report Share Posted August 16, 2009 Very nice. I might have to consider selling my VFC M82A1 to get one of these. Don't do it.... just a wall hanger really, bought one last week...8.5kg black shoots at 230 fps with spring lads at shop know about the problem, and have dropped the price again to try and get rid of them... http://www.airsoftworld.net/airsoft-guns/a...-pre-order.html Part has broke on gas bolt unit on third use.... can swap out a part from spring unit to carry on with testing.. Ultra gas chrono at around 580fps, normal gas at around 440 fps... accuracy not great, four shots on target from 30 metres with the next off target by 2-3 metres lol.... anyway it's not me on faulty bipod that wont lock open properly, and i would be better off using PGM,,,,, Its a centre piece alright, but no one will be impressed with its accuracy or power on the field.. I see you guys are looking at ways to improve the unit, will keep my eyes peeled next time im out in Hong Kong for any upgrades from any of our friends in Mong Kok.... Its a nice centre piece tho... Quote Link to post Share on other sites
jay851 Posted December 9, 2009 Report Share Posted December 9, 2009 just picked up one of these second hand, very nice. Is there meant to be a rubber seal on the gas bolt where the gas inlet hole is, as mine does not have one. Cheers jay. Quote Link to post Share on other sites
yakuza Posted December 10, 2009 Report Share Posted December 10, 2009 just picked up one of these second hand, very nice. Is there meant to be a rubber seal on the gas bolt where the gas inlet hole is, as mine does not have one. Cheers jay. Hi Jay, niether has mine, no rubber seal of any kind... not really needed on the gas bolt as it will shoot above 500 fps with the ultra gas. Could place some form of rubber gromet on the mag to improve flow to chamber, may increase fps.. Very little out there at the mo, that I know of as far as upgrades for this very needy weapon...lol Cheers Yak Quote Link to post Share on other sites
jay851 Posted December 10, 2009 Report Share Posted December 10, 2009 hi yak cheers, i find that a bit strange as surely a good seal there between the mag and the bolt will impove consistency and fps. will see if i can rig something up and let you know how it goes. cant find any reports on how the co2 mag performs on the net, but will be getting one soon to have a play with. is it true that these use standard aeg hop rubbers? jay Quote Link to post Share on other sites
yakuza Posted December 10, 2009 Report Share Posted December 10, 2009 hi yak cheers, i find that a bit strange as surely a good seal there between the mag and the bolt will impove consistency and fps. will see if i can rig something up and let you know how it goes. cant find any reports on how the co2 mag performs on the net, but will be getting one soon to have a play with. is it true that these use standard aeg hop rubbers? jay Hey jay, Where did you see the co2 mag for the m200? not heard they were available. Im aware there are conversion kits to change gas mag into co2 mag, but have not seen any in action. The Hop rubber is basically std item, increase accuracy if this is replaced with a Tight/B . cheers Yak Quote Link to post Share on other sites
jay851 Posted December 10, 2009 Report Share Posted December 10, 2009 uncompany have them in stock, bit pricey but should increase fps quite well. http://www.uncompany.com/pageproductdetails.asp?prodid=25885 i would imagine the tightbore barrel would have to be custom made as it is 800mm long. jay Quote Link to post Share on other sites
SilentTank Posted December 12, 2009 Report Share Posted December 12, 2009 (edited) uncompany have them in stock, bit pricey but should increase fps quite well. http://www.uncompany.com/pageproductdetails.asp?prodid=25885 i would imagine the tightbore barrel would have to be custom made as it is 800mm long. jay edGI makes awesome customs, you can send them your original specs and they will make whatever diameter you want down to to 5.98! And up to 800mm long! Edited December 12, 2009 by SilentTank Quote Link to post Share on other sites
jay851 Posted December 12, 2009 Report Share Posted December 12, 2009 edGI makes awesome customs, you can send them your original specs and they will make whatever diameter you want down to to 5.98! And up to 800mm long! nice one, i was searching for dees custom barrels but it looks like they dont exist anymore. has any m200 owners tried upgrading the spring in the spring bolt yet, looking at one of the previous posts the pdi ss springs look a close match but may need cutting down a bit. cant find any places that stock them though. jay Quote Link to post Share on other sites
yakuza Posted December 12, 2009 Report Share Posted December 12, 2009 Hi Jay, thats correct as silent tank pointed out, its a custom job... http://www.edgicustom-usa.com/#sniper_barrels I got my one done in Hong kong, by the lads in Mong Kok, 815mm i think, end cap is black so can't be seen through venting end piece of Cheytac, the cap push's into the end of cnc barrel to steady internal barrel. I like the look of co2 unit, i will order one this week and try out. Got 100,s of those little co2 cartridges for my 9mm Barretta. Sould improve consistency due to gas giving cooling effect during multiple shots. Will come back to you when ive had a few shots with new mag... will check the fps also. Cheers Yak Quote Link to post Share on other sites
jay851 Posted December 12, 2009 Report Share Posted December 12, 2009 nice one yak look forward to seeing the results of the co2 mag, will order one myself after xmas. ideally i would like an inner barrel 1000mm long as i will be making a silencer for it to run into. are you using the standard hop rubber in yours or a different one. jay Quote Link to post Share on other sites
yakuza Posted December 12, 2009 Report Share Posted December 12, 2009 nice one yak look forward to seeing the results of the co2 mag, will order one myself after xmas. ideally i would like an inner barrel 1000mm long as i will be making a silencer for it to run into. are you using the standard hop rubber in yours or a different one. jay Hi jay, Using a hop rubber from prometheus, seems quite good but i didnt really give the std one a good test...just love to mod. Dam that would be an extremely long barrel 1metre!!. I would worry that the length of the barrel may eventually have a negitive effect on the hop up due inner barrel skiming til exit of the BB? Maybe? If the hop up spins the bb anti clockwise to assist with length of flight most likely there would be an optimal exit point from the barrel before length would interfere with the spin on the bb. Besides its dam bulky as it is..carting it around the woods... need to do more gym work lol. Will do the same test n co2 and comeback with fps and 10 shot target groupage at 50/70m no point at 20/30 as any decent m4 would have you.. Keep in touch... Cheers Yak Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.