Jimmypie Posted September 6, 2013 Report Share Posted September 6, 2013 Another 1961 to the collection this time an AR variant. Quote Link to post Share on other sites
Pkekyo-Nor Posted September 11, 2013 Report Share Posted September 11, 2013 Yeah, so... I kinda like chestrigs... Quote Link to post Share on other sites
Jimmypie Posted September 11, 2013 Report Share Posted September 11, 2013 Who doesn't !! Quote Link to post Share on other sites
ForkTailedDevil Posted October 14, 2013 Report Share Posted October 14, 2013 D3CR in Kryptek Mandrake and ATS M4 Chest Rig Quote Link to post Share on other sites
Agent Hunk Posted October 28, 2013 Report Share Posted October 28, 2013 UW Gear chest rig. HSGI utility, bleeder, pistol pouches. TT radio pouch Quote Link to post Share on other sites
Legionnaire759 Posted October 31, 2013 Report Share Posted October 31, 2013 Mayflower UW Gen. IV Modified for 7.62 I had to cut out all the sown in AR mag inserts (all the while trying to forget that I was taking scissors to a roughly $200 chest rig). I then fabric glued some velcro strips in place to make the flap a kangaroo pouch. I then added velcro to a TT 7.62 shingle and used that as a kangaroo pouch. I chose to do this over getting the Gen V because I don't like the split front design of the V. It places my weak side mags too far from my reload hand for my comfort. Not to mention that the Gen. V is $75 more. I may opt to get some kydex for the mag pouches but other than that, I'm pretty much done. Quote Link to post Share on other sites
colwombat Posted November 10, 2013 Report Share Posted November 10, 2013 Eagle v2 RRV. Setup for my rifles. Game was civvies/solid colors vs woodland. Quote Link to post Share on other sites
weka Posted November 13, 2013 Report Share Posted November 13, 2013 My first real molle vest, SDS "ranger rack vest" plus molle padded belt (all issue). I just need to replace the two multicam 9mm pouches with either OD or woodland otherwise quite comfortable and usable. Quote Link to post Share on other sites
Infadel Posted November 13, 2013 Report Share Posted November 13, 2013 I had to look for the Pistol Pouch on the RRV their! Quote Link to post Share on other sites
Ivan le Fou Posted November 16, 2013 Report Share Posted November 16, 2013 Hey there,Don't really know where to ask this question, but here t goes anyway:What type of plate carrier would you mount a DC3R on? Do you think a JPC would be fine? I am having trouble picturing the result since the only DC3R+PC combo involves Mayflowers PC. *and I don't like mayflowers..* Quote Link to post Share on other sites
Blackjack13 Posted November 16, 2013 Report Share Posted November 16, 2013 Mayflower/Velocity. Tyr PICO, BPC, GPC. Ferro FCPC. It'll probably fit on a 6094 too.The 'issue' with the mounting of those sort of chest rigs relies on the placement of clips on the chest/cummerbund. Obviously the velcro on the lower front of the Mayflower/Velocity/Tyr's is more suited to the D3CR, as it allows it to be fixed, but it's not essential. You need the right sort of MOLLE placement on the upper chest to attach the clips.to. The Mayflower clips are very limited in their application (you need the two vertical rows on either side of the chest). Look at the stuff being made by DownRangeGear if your PC doesn't have that, as they make stand-alone clips that attach to horizontal MOLLE and allow you to fix the chest rig clips to that.That being said; I own a JPC (like everyone else) and don't think you could viably mount a D3CR/Mayflower to it. The horizontal molle to attach the clips to is too low (even with the DRG clips), so it wouldn't sit at the right height. I'm also not sure how well it'd fix to the airlite cummerbund. Quote Link to post Share on other sites
Ivan le Fou Posted November 16, 2013 Report Share Posted November 16, 2013 Thanks Blackjack.I guess I'll stay with this the good old PACA/Body Armor to go with the DC3R.. Quote Link to post Share on other sites
echodafish Posted November 16, 2013 Report Share Posted November 16, 2013 Pig Brig works like a champ. Quote Link to post Share on other sites
Ivan le Fou Posted November 16, 2013 Report Share Posted November 16, 2013 Pig Brig works like a champ. Ok thanks. For the buckles I suppose I should use the PIGs? Quote Link to post Share on other sites
Agent Hunk Posted February 1, 2014 Report Share Posted February 1, 2014 BFG RACKminusBFG TKNHSGI bleederTT Fight Light M4 doubleTT Fight Light M4 shigle(2) LBT 40mm doubleTT V accessory pouchTT Small radio pouch Quote Link to post Share on other sites
adrian_geot Posted February 1, 2014 Report Share Posted February 1, 2014 I like it. Is it CB or khaki? Quote Link to post Share on other sites
bladerunner168 Posted February 1, 2014 Report Share Posted February 1, 2014 HSGI AO Small Chest Rig Quote Link to post Share on other sites
Shardik Posted February 1, 2014 Report Share Posted February 1, 2014 HSGI AO Small Chest Rig Can I have this? Thanks Quote Link to post Share on other sites
Agent Hunk Posted February 2, 2014 Report Share Posted February 2, 2014 I like it. Is it CB or khaki? It's all CB but cell phone camera... Quote Link to post Share on other sites
Isamu Posted February 13, 2014 Report Share Posted February 13, 2014 Got a question for chest rigs gurus: I recently got an Eagle industries all molle chest rig dirt cheap, the ones which used to be sold at skdtac, and while it is in excellent condition and utterly love it, shoulder straps have their flaws. I cant clip a PTTor the like nor route a hydration tube through them for summer games, not to mention they are quite long, forcing me to run it lower than I would like to. im the not bulky type guy Right now I have temporarely fixed the ptt issue with some elastic cheap bands, but I would like a better longuer lasting option. So, what do you suggest? getting a compatible shoulder straps? bigger tougher badder elastic bands? Thanks for the advice guys Quote Link to post Share on other sites
BigAl Posted February 13, 2014 Report Share Posted February 13, 2014 Get a TT X Harness, it replaces the straps and gives Molle for the Hydration Tubes/Comms ans adds a small back panel with Molle on. It also stops the straps rubbing on your neck when the rig is loaded up. Quote Link to post Share on other sites
Isamu Posted February 13, 2014 Report Share Posted February 13, 2014 Certainly, BigAl, I have an old bulle MAV clone I can salvage it from for testing porpuses... will give it a try tomorrow. Meanwhile, Im adding this XHarness to the fray as well looks like what I need too, padded, light, high quality and with some PALs for my needs Opinions? Quote Link to post Share on other sites
J.J.Simpson Posted February 14, 2014 Report Share Posted February 14, 2014 I have beez chest rig for AK I like it. Build quality is good. Not EI or LBT, but still really good. Quote Link to post Share on other sites
Isamu Posted February 14, 2014 Report Share Posted February 14, 2014 Thanks JJ simpson: have you used or tested The tactical tailor Xharness? I have been looking around and the price of both is very similar, so the important factor at the moment is overall quality Quote Link to post Share on other sites
J.J.Simpson Posted February 14, 2014 Report Share Posted February 14, 2014 Nope Damn hard to get anything real deal in this end of Europe. I use Warrior Assault slim harness with their belt, but also quite rarely. But TT is more famous than BCS and probably have somekind warranty system in place, I would go TT probably. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.