pforcerecon Posted May 14, 2009 Report Share Posted May 14, 2009 Its a pocket/waist cip. So if you need to holster it but have no holster, just slid it on your waistline inside and your good to go Quote Link to post Share on other sites
Shardik Posted May 14, 2009 Report Share Posted May 14, 2009 Nice idea that acutally, and i guess this system would work with Molle loops? Quote Link to post Share on other sites
pforcerecon Posted May 14, 2009 Report Share Posted May 14, 2009 It comes in handy most when you gotta tuck it into your pants real quick and don't want to worry about it riding too high or falling through and onto the floor. works great on the side or front/back of the waistline. Not to mention pretty discreet, especially on say a smaller 1911. 1 Quote Link to post Share on other sites
Stealth1911. Posted May 14, 2009 Report Share Posted May 14, 2009 How does that Tercel shoot and are there any spare mags for it at all? It seems like a good deal Shoots REALLY nice, its easily comparable to a TM! It is a 100% TM clone, the mags are TM compatible, I bought 4x bell 720 mags, and theyre TM compatible aswell works flawlessly! plus the tercel/tm/bell 720 mags fit in the detonics aswell! Nice clip-draw. They certainly come in handy. Actually, nice guns and nice pictures as well. I love the clipdraws, really good quality and work really well, also makes the gun look a bit nicer. Cheers for the compliments aswell It comes in handy most when you gotta tuck it into your pants real quick and don't want to worry about it riding too high or falling through and onto the floor. works great on the side or front/back of the waistline. Not to mention pretty discreet, especially on say a smaller 1911. Full frame 1911 unless tucked inside the trouser is relatively discreet, the detonics 1911 barely peeks past the belt lower! its completely epic! Now I just need to work out how to carry my mags, probably end up with buying another set of fobus holsters. Quote Link to post Share on other sites
Stealth1911. Posted May 14, 2009 Report Share Posted May 14, 2009 Ive just tested the pistol on a target across my room and it looks pretty accurate, what would a good range be to do a few tests at? Quote Link to post Share on other sites
PUNISHER Posted May 14, 2009 Report Share Posted May 14, 2009 hi just to say i just got a army meu today a i will do the same work i did to the 1911 watch this space Quote Link to post Share on other sites
beretta Posted May 14, 2009 Report Share Posted May 14, 2009 so one of those Army 1911 is 100% compatible with Marui mag and parts? yep, the army one is a clone of the TM. the TM hopup is a little tight in the army one though. nothing major. it can be sorted out pretty easily. heres some comparison pics i took with the two, Quote Link to post Share on other sites
pforcerecon Posted May 14, 2009 Report Share Posted May 14, 2009 Since I'm having problems with the gun cycling, and if I can't get it fixed today or at all, what do you think guys...light or no light?? Quote Link to post Share on other sites
RockDog Posted May 14, 2009 Report Share Posted May 14, 2009 Thanks for the picture comparisons beretta. Quote Link to post Share on other sites
T0p Sp!N Posted May 14, 2009 Report Share Posted May 14, 2009 Haven't posted pics of my WE before *suicase pics though*: New and Old. :thumbs-up: Quote Link to post Share on other sites
Krait Posted May 15, 2009 Report Share Posted May 15, 2009 Just dont blow your balls off with that belt clip lol Quote Link to post Share on other sites
Guinness Posted May 15, 2009 Report Share Posted May 15, 2009 (edited) hi just to say i just got a army meu today a i will do the same work i did to the 1911 watch this space I'm guessing you haven't been following this thread too closely..... Since the photos posted previously clearly are not a Tercel 1911, here's a friendly suggestion..... Take some pictures of the process you use to remove all the paint and then how you chrome the gun please? Oh no...It's not that we doubt you after the chromed 1911 or anything ...well ok, that's not true....it is because of that Edited May 15, 2009 by Guinness Quote Link to post Share on other sites
tangman Posted May 15, 2009 Report Share Posted May 15, 2009 TM MEU Nova Vickers 1911 Kit Surefire 310R Quote Link to post Share on other sites
RockDog Posted May 15, 2009 Report Share Posted May 15, 2009 Tokyo Marui M1911-A1 Springfield Armory Custom Specs TM M1911-A1 Base Nova 3 Hole Trigger Nova Stainless Barrel Bushing Nove Springfield Slide & Frame set Nova SFA Stainless Beavertail Nova Stainless Magwell Nova Full Length Recoil Guide & Bushing Nova Extended Slide Stop Nova Ambi Safety Airsoft Surgeon Recoil Spring & nhanced Piston Head Shooters Design Springfield Hybrid Chamber & Threaded Barrel PDI Stainless Delta Hammer RS Springfield Armory Cross Cannon Wood Grips TM MEU Magazine Quote Link to post Share on other sites
Shardik Posted May 15, 2009 Report Share Posted May 15, 2009 Nice Rockdog, how much did that come to? Quote Link to post Share on other sites
Stealth1911. Posted May 15, 2009 Report Share Posted May 15, 2009 Rockdog... I love you.......r guns Where do you buy all your 1911 custom parts from? really want to order some nice parts (beavertail, nice hammer, nice trigger etc) soon but no idea where to get them from! Quote Link to post Share on other sites
Shardik Posted May 15, 2009 Report Share Posted May 15, 2009 Most UK retailers that stocked anything decent, seem to have flocked towards the cheapsoft market, shame, as its a pain ordering custom parts from HK/US Quote Link to post Share on other sites
Stealth1911. Posted May 15, 2009 Report Share Posted May 15, 2009 Most UK retailers that stocked anything decent, seem to have flocked towards the cheapsoft market, shame, as its a pain ordering custom parts from HK/US Oh yeah, especially when its just a few small items and then you get bummed by customs Quote Link to post Share on other sites
rws591 Posted May 15, 2009 Report Share Posted May 15, 2009 (edited) PGC and Pachmayr fitted Marui MEU. Edited May 15, 2009 by rws591 Quote Link to post Share on other sites
pforcerecon Posted May 15, 2009 Report Share Posted May 15, 2009 Tangman, looks like I've found my other twin! Very nice job there. Where did you score the extended slide release? Also how was it getting the light to fit? Quote Link to post Share on other sites
tangman Posted May 15, 2009 Report Share Posted May 15, 2009 The slide release came with the 310R when I bought it from the seller. The fitting was a *bramston pickle* and I would die a happy person if I never had to file anything again, if I do have to then I vow to buy a dremel. Both light and the lower frame of the 1911 have been irreversibly modded Quote Link to post Share on other sites
BaBaBooey Posted May 16, 2009 Report Share Posted May 16, 2009 The slide release came with the 310R when I bought it from the seller. The fitting was a *bramston pickle* and I would die a happy person if I never had to file anything again, if I do have to then I vow to buy a dremel. Both light and the lower frame of the 1911 have been irreversibly modded Are the airsoft 1911 frames wider than the real ones? I was thinking of installing a 611, but would rather not damage the frame or the light. Quote Link to post Share on other sites
tangman Posted May 16, 2009 Report Share Posted May 16, 2009 I think it'd be safe to assume so, I think the closest sized ones would be one from WA. I dont recall a friend having to do much to fit his 610 to a WA Marsoc, the guy I bought the 310R from had to file a bit of the frame on his WA Kimber TLE The frame on my one was easily 3-4mm too wide, no question about it. Quote Link to post Share on other sites
pforcerecon Posted May 16, 2009 Report Share Posted May 16, 2009 If anyone scores an extra long slide release, I'd be really interested in it. Especially if it'll work with a marui. I think one of the main differences though with airsoft 1911 Frames and the RS, is the face the RS are from billet, and these are made of Aluminum/Crappy pot metal at times, which is nothing compared to the RS. Prime are from what I understand supposed to be the best, hence why they are so expensive. Quote Link to post Share on other sites
beretta Posted May 17, 2009 Report Share Posted May 17, 2009 WE do a long slide release, it comes on that monstrosity of a 1911 they do with the fake white ivory grips. Does anyone know where i could pick up a clipdraw? somewhere that will ship outside of the US too. cheers, Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.