MrManiac Posted July 6, 2009 Report Share Posted July 6, 2009 (edited) Just to pass on alittle custom job ive done recently regarding sights... If you own a Marui VSR sniper rifle or know someone who does, They will usually dispense with the iron sights and fit a scope, sooo here's a neat way to use the now none used, rear iron sight: Alittle bit of cutting and sanding is all that's needed, oh and a screw that fits the thread in the blowback housing...simple. Edited July 6, 2009 by MrManiac Quote Link to post Share on other sites
suoires Posted July 7, 2009 Report Share Posted July 7, 2009 Anyone have pictures of a 1911 with a m6 or an m6 light? I'm looking into purchasing a light for my TM MEU, but I'm not sure what to get. Thanks in advance! Quote Link to post Share on other sites
Billy Bob the Sniper Posted July 7, 2009 Report Share Posted July 7, 2009 -WA Kimber scw3 -Streamlight M3 -Xfire threaded barrel/KA 45 can Quote Link to post Share on other sites
atz Posted July 7, 2009 Report Share Posted July 7, 2009 My last wilson, Western arms Wilson Combat super grade. Quote Link to post Share on other sites
Holmes Posted July 10, 2009 Report Share Posted July 10, 2009 My Kimber. Quote Link to post Share on other sites
Mr Foxhound Posted July 10, 2009 Report Share Posted July 10, 2009 (edited) Possibly my favorite 1911 in this thread Billy_Bob. Looks amazing. I have those same grips on my MEU and love them Ive always loved Kimbers(Kinbers in airsoft xD), also, more pics, Holmes =P Edited July 10, 2009 by Mr Foxhound Quote Link to post Share on other sites
Holmes Posted July 10, 2009 Report Share Posted July 10, 2009 Ive always loved Kimbers(Kinbers in airsoft xD), also, more pics, Holmes =P I will for sure once I get another shoot up and running. My Kimber is my only gun right now (ICS MP5 and M4 are long gone), and with my recent photography hobby, I've just realized how much fun it is to get closeups of. Quote Link to post Share on other sites
KUNFUCHOPSTICKS Posted July 10, 2009 Report Share Posted July 10, 2009 (edited) http://img30.imageshack.us/img30/2262/dscf0340z.jpg http://img25.imageshack.us/img25/7412/dscf0318t.jpg http://img44.imageshack.us/img44/3359/dscf0319r.jpg http://img25.imageshack.us/img25/6386/dscf0320m.jpg http://img50.imageshack.us/img50/3048/dscf0321.jpg It's a full metal Tercel 1911 Not bad in terms of trademarks. Only missing one. Especailly not bad when it's $70 shipped! Review: http://www.arniesairsoft.co.uk/forums/inde...howtopic=170666 Edited July 11, 2009 by elrey IMG tags removed Quote Link to post Share on other sites
AnotherJesus Posted July 10, 2009 Report Share Posted July 10, 2009 You think maby there's a reason for a picture limit per post? I certainly aint impressed I just downloaded 20 pictures of a stock Tercel 1911. ¬¬ BillyBob, I love that Kimber. Quote Link to post Share on other sites
chris u'5 Posted July 10, 2009 Report Share Posted July 10, 2009 (edited) FFS!! Congratulations, you have just ruined this page of the 1911 thread. At least re-size them...and take a look at the rules while you're at it. Very nice Wilson atz. Edited July 10, 2009 by chris u'5 Quote Link to post Share on other sites
KUNFUCHOPSTICKS Posted July 11, 2009 Report Share Posted July 11, 2009 Well said, but it's a picture thread, what were you expecting. Certainly don't roam in these parts with a 56k. Quote Link to post Share on other sites
-=OGGY=- Posted July 11, 2009 Report Share Posted July 11, 2009 True, but why do we need to see a 1200x1600 picture of a gas fill valve on a china pistol? Quote Link to post Share on other sites
zero69r Posted July 11, 2009 Report Share Posted July 11, 2009 Give the guy a break clearly he's very happy with his 1911...the superior gbb model in the airsoft world! Love yours by the way billy bob, it's similar-ish to mine (but yours is nicer) Quote Link to post Share on other sites
renegadecow Posted July 11, 2009 Report Share Posted July 11, 2009 Repainted. Bake-on hi-temp paint apparently works wonders durability-wise (used as cheap substitute for alumahyde or duracoat for real guns). But paint manufacturers really shouldn't label their cans "flat black" if they aren't truly, well, "flat". Looks like its been held by some galoot with big, burly, sweaty mitts. Quote Link to post Share on other sites
Seraphim989 Posted July 13, 2009 Report Share Posted July 13, 2009 Not as expensive as some of the ones around here but it works well. Quote Link to post Share on other sites
suoires Posted July 13, 2009 Report Share Posted July 13, 2009 (edited) Got some new pictures of my Marui MEU. So far: TM MEU Guarder Springfield metal body kit Guarder 150% recoil spring kit PDI 6.01 6-inch inner barrel Creation metal outer barrel PDI 14mm- silencer attachment G&G SS-100 silencer Also, has anyone had experience with the PDI 14mm silencer attachment? It stays put after tightening the 3 little screws, but it always comes loose and slides right off when I fire the gun or rack the slide. Any advice? (excuse the greasy look, since I had just finished installing everything and was so excited to take a picture ) Edited July 13, 2009 by suoires Quote Link to post Share on other sites
renegadecow Posted July 13, 2009 Report Share Posted July 13, 2009 Threadlock? Quote Link to post Share on other sites
KUNFUCHOPSTICKS Posted July 13, 2009 Report Share Posted July 13, 2009 (edited) True, but why do we need to see a 1200x1600 picture of a gas fill valve on a china pistol? lol I have been running into a lot of elitist folks like you when showing my Chinese made clone. If you want to spend $300 on a fake gun that is made in Japan, congrats and good for you. But note: most people have better places to put money like that, especially in US, where you can get a Springfield GI for $400. That goes for others here too, go deck out your guns all you want, but don't brag and look down upon Just because it's cheaper. It being made in China doesn't make it any less of a toy than your $300 gun that shoots 6mm plastic bbs. Edited July 13, 2009 by KUNFUCHOPSTICKS Quote Link to post Share on other sites
AnotherJesus Posted July 13, 2009 Report Share Posted July 13, 2009 Do we need to discuss this any further? If you feel you do, PM me, Oggy or Chris u'5. Let's not clog up a picture thread. Quote Link to post Share on other sites
ezgil Posted July 14, 2009 Report Share Posted July 14, 2009 i promise to fire up a nikon d40 shot of my 1911s once i get this kink worked out. ive posted on the just handguns topic but i think i could use some help here as well. instead of reposting and clogging up two threads, ill just leave a link to the thread: http://www.arniesairsoft.co.uk/forums/inde...howtopic=170840 i have some fitment issues with a pgc kit for a TM 1911A1 as expected. if someone could enlighten me on these fixes, thatd be greatly appreciated. thanks guys Quote Link to post Share on other sites
wwjkc Posted July 14, 2009 Report Share Posted July 14, 2009 (edited) A proper 1911, upgrades are too much to list, so here's what's not upgraded: Slide stop (have to mod to make it work properly) Inner barrel assembly (just the unit is stock, the inner barrel is a custom cutted PDI 6.01 along with CP custom rubber) Everything else on the gun is be upgraded, this thing shots 365 FPS using just green and 0.20bbs. Pics: God I love the Ed Brown's memory grip safety: thanks for looking Edited July 14, 2009 by wwjkc Quote Link to post Share on other sites
Clockwork_O Posted July 14, 2009 Report Share Posted July 14, 2009 Now that's one fine 1911, my compliments Jerry! Love the grip safety! Quote Link to post Share on other sites
atz Posted July 14, 2009 Report Share Posted July 14, 2009 That's a nice 45 you have there. Good work! Quote Link to post Share on other sites
MrManiac Posted July 14, 2009 Report Share Posted July 14, 2009 'wwjkc' that's one damn fine Kimber Is that a 'real steel' grip safety moded to fit? Quote Link to post Share on other sites
pforcerecon Posted July 14, 2009 Report Share Posted July 14, 2009 wwjkc, that is a beautiful gun right there! Absolutely beautiful. If you don't mind me asking, how much did it all set you back? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.