somegirls Posted August 2, 2010 Report Share Posted August 2, 2010 New spring guide rod and bushing? Quote Link to post Share on other sites
alston251 Posted August 2, 2010 Report Share Posted August 2, 2010 Very nice, that was the setup i was going for. But went with the Desert warrior instead, doesn't stop me from building another Kimber Warrior tho! May i know the parts list and base gun? I'm currently looking for a guide rod for my Desert Warrior. And are those RS grip screws? Thanks man. Quote Link to post Share on other sites
chas Posted August 3, 2010 Report Share Posted August 3, 2010 Its an Army Kimber warrior. I just polished the trigger, hammer and mag. The hex screws are stock (I actually asked Army to use these instead of flat head ones, lokk so much better). I also used Tamiya flat sand spray to paint the grips. Quote Link to post Share on other sites
alston251 Posted August 3, 2010 Report Share Posted August 3, 2010 Oh I see, does it come stock with a chrome guide rod? I might get one just to get the hex screws and maybe the guide rod. Quote Link to post Share on other sites
Isamu Posted August 3, 2010 Report Share Posted August 3, 2010 Oh I see, does it come stock with a chrome guide rod? Yes Quote Link to post Share on other sites
Wutang Posted August 7, 2010 Report Share Posted August 7, 2010 Budget GBB Build: Army MEU (silver): $60 shipped @ Ebaybanned, sale price Guarder Steel Slide Lock: $20 shipped Firefly Soft hop up rubber: free (came as a spare for my VSR-10) Pachmayr American Legend Grips: $26 @ Cheaper than Dirt DIY mods: Sanded down and polished the slide to get rid of the grainy stock finish Teflon taped the hop up bucking Polished the inner barrel Fires at around 310 fps Quote Link to post Share on other sites
TheFull9 Posted August 8, 2010 Report Share Posted August 8, 2010 Made a couple of small changes to the Night Warrior, Spartan Doctrine spring guide and RS ERGO Polymer grips in OD. Then played slide swapsies with the MEU. Family group shot. Quote Link to post Share on other sites
p.briden Posted August 9, 2010 Report Share Posted August 9, 2010 Budget GBB Build: Army MEU (silver): $60 shipped @ Ebaybanned, sale price Guarder Steel Slide Lock: $20 shipped Firefly Soft hop up rubber: free (came as a spare for my VSR-10) Pachmayr American Legend Grips: $26 @ Cheaper than Dirt DIY mods: Sanded down and polished the slide to get rid of the grainy stock finish Teflon taped the hop up bucking Polished the inner barrel Fires at around 310 fps Really nice 1911 Wutang, good job . Are the wood grips actually that red-coloured in real life or is that just the photo? Quote Link to post Share on other sites
fal Posted August 9, 2010 Report Share Posted August 9, 2010 Nice. Is there anyway can one plug up those holes on the side of the frame "nicely"? I really wish the night warrior came with standard frame instead stupid looking rail mount on them. Quote Link to post Share on other sites
TheFull9 Posted August 9, 2010 Report Share Posted August 9, 2010 Nice. Is there anyway can one plug up those holes on the side of the frame "nicely"? I really wish the night warrior came with standard frame instead stupid looking rail mount on them. Unfortunately, not that I know of. I'm thinking of possibly re-attaching the rail then getting an M3/M6x and one of these: http://www.opticsplanet.net/safariland-6004-sls-tactical-holster-od-green-right-hand-6004-5621-561.html Hopefully it should fit, though I'm not sure if the TM rail is perhaps larger than the integrated rail you find on various RS 1911 frames. Quote Link to post Share on other sites
chas Posted August 10, 2010 Report Share Posted August 10, 2010 Just got an ARMY MEU in the mail today: totally compatible, as they are the same exact design, except for the recoil spring assembly. Wich means its also compatible with Marui 1911/MEU parts. The MEU mag works in the Kimber and doesnt wobble, but the finish is not as nice. You better sand it. Quote Link to post Share on other sites
Mike_West Posted August 10, 2010 Report Share Posted August 10, 2010 My new Army MEU, already in the process of customizing (I swapped the mainspring housing with one of my Bell 1911s - but I still need a spare one!). It still needs new trigger and 1911 magazine (in transit), guide rod and barrel bushing (on shopping list), mainspring housing (postponed until I get enough money) and grips (help me decide the final look, I made a thread for it). Quote Link to post Share on other sites
-l- Posted August 10, 2010 Report Share Posted August 10, 2010 (edited) Mine! Marui MEU base, PGC kimber warrior kit, RS VZ Operator grip Edited August 10, 2010 by -l- Quote Link to post Share on other sites
Fellowz Posted August 11, 2010 Report Share Posted August 11, 2010 has anyone tried to use a HERA 1911 Stock on their airsoft 1911 yet? im curious to see if this will fit? Quote Link to post Share on other sites
Delta_Knight Posted August 15, 2010 Report Share Posted August 15, 2010 (edited) Just another ARMY MEU (Sorry for the Size) Edited August 15, 2010 by Delta_Knight Quote Link to post Share on other sites
Foxhound_Tur Posted August 15, 2010 Report Share Posted August 15, 2010 Wish I had bought one of the gold MEU's at Ebaybanned while they had them for 59 bucks. Quote Link to post Share on other sites
Isamu Posted August 19, 2010 Report Share Posted August 19, 2010 Joining the 1911 club. its a KJW CO2 1911 fitted with some spares I had lying around and some Army kimber Warrior parts Nice and Simple, with an extended slide release to make it even more comfortable Coments? kitlist? just ask Quote Link to post Share on other sites
Wutang Posted August 20, 2010 Report Share Posted August 20, 2010 Quote Link to post Share on other sites
chas Posted August 22, 2010 Report Share Posted August 22, 2010 My new favourite 1911: the Nighthawk Custom Global Response Pistol. (just in case: this is real steel, not mine) Also, I made an album with my favourite 1911's. Check it out: http://s273.photobucket.com/albums/jj235/chas1542/1911%20I%20love/ 1 Quote Link to post Share on other sites
somegirls Posted August 23, 2010 Report Share Posted August 23, 2010 Maybe it's just because it's new, but I pretty much dig that digi camo. Quote Link to post Share on other sites
Bando Posted August 23, 2010 Report Share Posted August 23, 2010 id love one in acu /notatroll Quote Link to post Share on other sites
RacingManiac Posted August 23, 2010 Report Share Posted August 23, 2010 I am more fan of these 2....as far as new 1911 goes that is... I might consider having ProG4 or someone make the T3 Comp set myself, though I won't have an officer frame for TM... Other custom 1911s? God there are so many I can't even begin to pick... Quote Link to post Share on other sites
somegirls Posted August 24, 2010 Report Share Posted August 24, 2010 More pics of the first one please Quote Link to post Share on other sites
RacingManiac Posted August 24, 2010 Report Share Posted August 24, 2010 http://www.nighthawktactical.com/T3_comp.html some Chris Costa on that page as well...lol Quote Link to post Share on other sites
WTF?Shane Posted August 24, 2010 Report Share Posted August 24, 2010 (edited) Tokyo Marui FTW! Edited August 24, 2010 by WTF?Shane Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.