Horsem4n Posted January 15, 2011 Report Share Posted January 15, 2011 have someone re-anodize it if you can. its not expensive. Quote Link to post Share on other sites
Snigel Posted January 15, 2011 Report Share Posted January 15, 2011 (edited) Last question! I noticed that they have this hammer in stock, would that work? It looks shorter, but is it enough? Edit: Since its a picture thread.. TM with Guarder MBK, steel barrel and rear sight. Edited January 15, 2011 by Snigel Quote Link to post Share on other sites
njd37 Posted January 15, 2011 Report Share Posted January 15, 2011 Kimber Custom Covert II Based of TM MEU with a Hurricane Kimber Custom II kit on it with Pachmayr grips. Quote Link to post Share on other sites
davedawg123 Posted January 15, 2011 Report Share Posted January 15, 2011 TM with Guarder MBK, steel barrel and rear sight. Nice. Guarder steel barrel? How's the fitting? Quote Link to post Share on other sites
Snigel Posted January 16, 2011 Report Share Posted January 16, 2011 I bought the gun in its current state so I did not install it. Seems like nothing has been done for the barrel to fit properly so I guess it's just fine I have just placed an order on parts for this, will update on arrival! Quote Link to post Share on other sites
IronWolf Posted January 16, 2011 Report Share Posted January 16, 2011 Chaps, Please make specific threads for your queries. That way, it makes it far easier for people with the same question as you to find their answer through the search feature. It also helps keep clutter to a minimum too . In the mean time, i'll keep the above posts there as a reference for other users to take heed. Back to pictures! Quote Link to post Share on other sites
Squab27 Posted January 17, 2011 Report Share Posted January 17, 2011 New Detonics 1 Quote Link to post Share on other sites
k.a Posted January 17, 2011 Report Share Posted January 17, 2011 (edited) Army full metal Detonics ?? Edited January 17, 2011 by k.a Quote Link to post Share on other sites
Snigel Posted January 20, 2011 Report Share Posted January 20, 2011 (edited) Update to my previous post, got some parts from WGC yesterday. Parts list for now: TM 1911a1 Guarder parts: FMK 150% springs Steel MSH, mag catch, rear sight, slide stop, barrel and barrel bushing. LCT trigger 'Bobbed' original spur-hammer The WC-grips are some WA-ones I had lying around, will change those since they're in bad shape.. I got a beavertail for it too (I actually got two since I messed up the order..) but I did not know about the frame being different on this model. Might dremel it out to fit later on but I kinda like it the way it is now since it's not biting my hand anymore after the bobbing! Edited January 20, 2011 by Snigel 1 Quote Link to post Share on other sites
Blackjack13 Posted January 20, 2011 Report Share Posted January 20, 2011 New toy arrived yesterday, haven't tested it yet because of the cold but... TM MEU/Hurricane Kimber Covert II TM MEU, Hurricane Kimber Covert II kit (full metal everything), 6.03 Tightbore, full length guide rod, enhanced spring, emptier bank account. Quote Link to post Share on other sites
davedawg123 Posted January 21, 2011 Report Share Posted January 21, 2011 That is pretty sweet. Quote Link to post Share on other sites
bladeofdeath3 Posted January 21, 2011 Report Share Posted January 21, 2011 For the lols Quote Link to post Share on other sites
The Crunchy Bunny Posted January 22, 2011 Report Share Posted January 22, 2011 How does that thing even cycle? lol Quote Link to post Share on other sites
bladeofdeath3 Posted January 22, 2011 Report Share Posted January 22, 2011 It's a joke gun. I run a shorter silencer since the barrel extends into the silencer(150mm barrel i think). I should try to fire it and see if it works... Quote Link to post Share on other sites
FireKnife Posted January 22, 2011 Report Share Posted January 22, 2011 (edited) Well here is mine, sorry for the poor picture, best camera i have got at the moment: It is a TM Might Warrior Slide on a MEU Frame with a Detonics Safety and Trigger Bar so it mounts the single sided safety with nothing poking out the other side. Oh and it has the custom STARS grips 'renegadecow' did for me a while back. Also have the original grips but it looks good with both. Now to think up a name for her, any suggestions at all? Edit: Will get a better pic up tomorrow when the sun is out up here (which is about 1hr in north east Scotland). 'FireKnife' Edited January 22, 2011 by FireKnife Quote Link to post Share on other sites
FireKnife Posted January 23, 2011 Report Share Posted January 23, 2011 A-ha the sun is out so here is a better pic. One with the TM NW grips on: And here is one with the STARS Resi grips on: Add to that it is a great gun to shoot and i still need a name for her. 'FireKnife' Quote Link to post Share on other sites
The Vainguard Posted January 27, 2011 Report Share Posted January 27, 2011 (edited) TM base springfield V12 TM MEU + Detonator V12 metal kit + anvil chrome coated accessaries Nice piece. I was looking at that V12 kit. Can't believe you dropped the cash for Anvil controls on a TM, that's a first I've seen, hats off to you sir, I love it. How was the fit on the Detonator kit? All from Sanko I reckon? Loving the grips, what are they? Proud grip bushings too huh? Edited January 27, 2011 by The Vainguard Quote Link to post Share on other sites
ernesto Posted January 27, 2011 Report Share Posted January 27, 2011 Army Colt 1911 MEU Quote Link to post Share on other sites
rusTORK Posted January 27, 2011 Report Share Posted January 27, 2011 TM MEU + Detonator V12 metal kit + anvil chrome coated accessaries It's cost $400 000 to hold it 12 seconds? I found DETONATOR MBKs and Anvil's parts most expensive in the Airsoft... Beautiful. Quote Link to post Share on other sites
AirsoftAddict Posted January 28, 2011 Report Share Posted January 28, 2011 Not sure if these 2 count as the base is a 1911? Quote Link to post Share on other sites
davedawg123 Posted January 28, 2011 Report Share Posted January 28, 2011 No, they should go in the 2011 thread. Nice nonetheless. Quote Link to post Share on other sites
farfromahero Posted January 30, 2011 Report Share Posted January 30, 2011 Airsoftaddict, did you put the colored grips on for some personal flair, or is it some kind of local law? Quote Link to post Share on other sites
The Vainguard Posted January 30, 2011 Report Share Posted January 30, 2011 Just acquired this. Planning to Duracoat it Magpul FDE, Add V12 portings, Get black controls, Straight barrel Quote Link to post Share on other sites
Zmarre Posted January 30, 2011 Report Share Posted January 30, 2011 I'm looking for a silver Kimber kit for WA (not warrior). Where could I possibly score such a thing? Boomsarms has a silver V12 kit, but no kimber kit. Quote Link to post Share on other sites
heavri Posted January 30, 2011 Report Share Posted January 30, 2011 Vainguard, are those "Alien"- grips? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.