Wooly_Booly Posted April 30, 2018 Report Share Posted April 30, 2018 (edited) My pride and joy,Prime/WA SCW 3 SIG GSR.The trigger, magazine release, slide catch, thumb safety, grip safety, mainspring housing, and hammer are all Prime/Anvil made.The outer barrel, chamber, recoil assembly/recoil plug, and barrel bushing are all made by Gunsmith Ninja (Some translations show it as Ninjya, probably just Ninja.)Blowback unit is CP made machined aluminum. I don't recall if it's 7075 or 6061.Grips are genuine Ergo grips.Not sure on/can't recall the brand of body pins, grip screws, inner barrel/hop-up assembly.Fitment is a little too good, I can't seem to remove the recoil plug from the slide without maybe using a rubber mallet, but I didn't want to take the risk. Edited April 30, 2018 by Wooly_Booly 7 Quote Link to post Share on other sites
icolater Posted April 30, 2018 Report Share Posted April 30, 2018 Wow !!!! Beautiful guns lads !!! Quote Link to post Share on other sites
antroa1985 Posted April 30, 2018 Report Share Posted April 30, 2018 I've never even seen the Tussey custom nor the SIG GSR before. Holy smokes those are nice! Really like your Nighthawk T3 too. I'm a sucker for ported slides. Guess I'll have to start browsing yahoo japan auctions Quote Link to post Share on other sites
Katotaka Posted May 2, 2018 Report Share Posted May 2, 2018 I wish some of these models are made available in TM flavour, when I was younger those are hard to justify, oh, wait, not even now Especially NH T3, but I wouldn't mind newer NH models like Agent 1 lol Quote Link to post Share on other sites
Wooly_Booly Posted May 2, 2018 Report Share Posted May 2, 2018 I wish some of these models are made available in TM flavour, when I was younger those are hard to justify, oh, wait, not even now Especially NH T3, but I wouldn't mind newer NH models like Agent 1 lol Ken's Props makes a 3d printed T3, though that may not be what you're looking for. Quote Link to post Share on other sites
hitmanNo2 Posted May 22, 2018 Report Share Posted May 22, 2018 Lovely pieces Wooly. Reminds me of the old days on this thread before TM had a 1911. 1 Quote Link to post Share on other sites
mightyjebus Posted May 22, 2018 Report Share Posted May 22, 2018 I've had this TM with Guarder aluminium frame and slide for ages and have been meaning to polish it up at some point. That some point was today. I was going to do the lower frame as well but I quite like the 2 tone look. 4 Quote Link to post Share on other sites
icolater Posted May 24, 2018 Report Share Posted May 24, 2018 https://imgur.com/a/pqSdIeT 1 Quote Link to post Share on other sites
hitmanNo2 Posted May 24, 2018 Report Share Posted May 24, 2018 Safe to say you like Kimbers Quote Link to post Share on other sites
icolater Posted May 24, 2018 Report Share Posted May 24, 2018 Yes Sir, my favourite 1911s, think it's because of the rear sight. Quote Link to post Share on other sites
wolfgeorge Posted May 26, 2018 Report Share Posted May 26, 2018 🤩🤩 Fantastic pieces man. Wolf 1 Quote Link to post Share on other sites
Wooly_Booly Posted May 27, 2018 Report Share Posted May 27, 2018 Here's my Western Arms/Prime Bob Chow 1.5 special. Last few photos are with my stock WA Bob Chow 1.5 special in Royal Blue 3 Quote Link to post Share on other sites
antroa1985 Posted May 30, 2018 Report Share Posted May 30, 2018 Very nice! Huge fan of the Bob Chow with rounded edges and serrated finger grip. It's one of the WA pistols on my wish list. Oh man, my wish list is too long! Quote Link to post Share on other sites
hitmanNo2 Posted May 30, 2018 Report Share Posted May 30, 2018 There's a 1.5 Bob Chow on Yahoo Auctions right now. 'Vintage' finish one though. https://page.auctions.yahoo.co.jp/jp/auction/q210356867 Quote Link to post Share on other sites
antroa1985 Posted May 31, 2018 Report Share Posted May 31, 2018 Oooohh, nice! But unfortunately it will have to wait. Thanks for the tip though. Much appreciated! Quote Link to post Share on other sites
BigAl Posted June 9, 2018 Report Share Posted June 9, 2018 Dam Hitman, wish we could buy on Yahoo Auctions theres a WA Wilson Combat Profesional for £29! Its silver with wear to the finish but, jeez!!! Quote Link to post Share on other sites
wolfgeorge Posted June 10, 2018 Report Share Posted June 10, 2018 Yea.. you can find some deals there. But prices of the nice pieces went significantly higher the past couple years. There are some guys/proxy bidders that keep raising the prices. Wolf Quote Link to post Share on other sites
antroa1985 Posted June 14, 2018 Report Share Posted June 14, 2018 Finally finished my ground up custom built Infinity 1911. Took a while buying parts here and there but now she is complete! 5 Quote Link to post Share on other sites
BigAl Posted June 17, 2018 Report Share Posted June 17, 2018 (edited) Stunning, though A nice set of wood grips would finish it of perfectly. Edited June 17, 2018 by BigAl Quote Link to post Share on other sites
icolater Posted June 17, 2018 Report Share Posted June 17, 2018 On 6/14/2018 at 8:35 PM, antroa1985 said: Finally finished my ground up custom built Infinity 1911. Took a while buying parts here and there but now she is complete! Beautiful!!! Love everything about it. So perfect. Quote Link to post Share on other sites
antroa1985 Posted June 18, 2018 Report Share Posted June 18, 2018 On 6/17/2018 at 8:14 PM, BigAl said: Stunning, though A nice set of wood grips would finish it of perfectly. Thank you. You might be right. I did consider some dark wood grips, but in the end I opted for the faux black pearl grips. Think it finishes it off nicely and keeps with the black and silver theme in stead of adding wood color to the mix. But I might try on some wood grips later down the road. Quote Link to post Share on other sites
wolfgeorge Posted June 19, 2018 Report Share Posted June 19, 2018 My favorite gun among the ones in my collection Prime Colt Gold Cup National Match Wolf 2 Quote Link to post Share on other sites
icolater Posted June 19, 2018 Report Share Posted June 19, 2018 Amazing!!! Love the grips, like a katana. Quote Link to post Share on other sites
garry Posted June 19, 2018 Report Share Posted June 19, 2018 Wolf, Is that TM or WA based? I'll bet it's worth a fortune.. Quote Link to post Share on other sites
wolfgeorge Posted June 19, 2018 Report Share Posted June 19, 2018 Its WA based.. Yes it's pretty expensive.. like all brass guns. @icolater yes they called Katana grips! I bought them from CRW a few years ago. Wolf Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.