bloodybiscuit Posted August 2, 2009 Report Share Posted August 2, 2009 What are you going to use as the base gun? I find it strange when there's H&K sights on an M4 though. Edit: What's that sling? Im still deciding on a base gun and i still dont have a mock up list of all that parts on the gun pictured. Anyone feel free to help, im not a total newb when it comes to parts but im not super familiar with all the slings, mounts, and RIS units as are some of you here so help would be appreciated. My biggest concern is where to get that RIS and what kind is it along with the outer barrel. Any suggestions on what to base the gun off of. I might even just build it from scratch and get a systema drop in Link to post Share on other sites
reaper16 Posted August 2, 2009 Report Share Posted August 2, 2009 @ bloody biscuit, the RIs is a Larue model im pretty sure, shouldn't be hard to find. Also the LWRC that haley is using what rail system is on the front? Is it TROY? If so i think i found the new front end for my KA. Link to post Share on other sites
Titleist Posted August 2, 2009 Report Share Posted August 2, 2009 That's not an LWRC, that's an M&P15 Link to post Share on other sites
Victory Posted August 2, 2009 Report Share Posted August 2, 2009 (edited) Is it TROY? It is either Troy or Samson. Most likely Troy. -Vic P.S. If I remember correctly, Samson stole the design from Troy, but lost in court. They're very similar to one another, with only a few differences. The holes in the handguard being one of them, I'm pretty sure. The Troy is better, hands down. That's for sure. Edited August 2, 2009 by Victory Link to post Share on other sites
Wayneard3413 Posted August 2, 2009 Report Share Posted August 2, 2009 It's a Troy Link to post Share on other sites
ELBAR Posted August 2, 2009 Report Share Posted August 2, 2009 M&P uses troy rails. S&W have a contract with troy to supply the front rails and flip up sights Link to post Share on other sites
Reincarnation... Posted August 2, 2009 Report Share Posted August 2, 2009 http://i345.photobucket.com/albums/p399/bl...9621028WEVO.jpg i still dont have a mock up list of all that parts on the gun pictured. Anyone feel free to help, im not a total newb when it comes to parts but im not super familiar with all the slings, mounts, and RIS units as are some of you here so help would be appreciated. Sometimes, I scare myself. Hope this helps out a bit. Real steel part list, you got to find the replicas Back to Front. Magpul UBR, FDE Gear Sector Two Point Carbine Edition, Dark Earth Magpul MIAD, FDE Magpul Enhanced Trigger Guard, Black Heckler & Koch 416 Sights Set Aimpoint COMP3 American Defense High Profile QD Mount Blue Force Gear Redi-Mod Magpul Pmag, FDE Surefire M900, FDE Daniel Defense M4 9.0 FF, FDE Daniel Defense Rail Mount QD Swivel with PAK™ (Positive Action Knob) Magpul XT Rail Cover, FDE AAC Ranger 2 Suppressor Link to post Share on other sites
0nslaught Posted August 2, 2009 Report Share Posted August 2, 2009 @ bloody biscuit, the RIs is a Larue model im pretty sure, shouldn't be hard to find. Also the LWRC that haley is using what rail system is on the front? Is it TROY? If so i think i found the new front end for my KA. Its not a LT rail, its daniel defense. http://www.danieldefense.com/?page=shop/de...;product_id=112 @ BloodyBiscuit, sorry but i dont think there are any replica rails for that DD model. find your own and make it similar to that setup, i believe its 9.0 inch Link to post Share on other sites
gerrysnaps Posted August 2, 2009 Report Share Posted August 2, 2009 http://www.pbase.com/image/115581610.jpg Holy Suitcase! How did Travis end up copying one of my builds down to the arrangement of the XTM rail panels? Going to have to post a new pic of it soon! Link to post Share on other sites
bloodybiscuit Posted August 2, 2009 Report Share Posted August 2, 2009 Its not a LT rail, its daniel defense. http://www.danieldefense.com/?page=shop/de...;product_id=112 @ BloodyBiscuit, sorry but i dont think there are any replica rails for that DD model. find your own and make it similar to that setup, i believe its 9.0 inch This looked pretty similar but possibly wrong size.. http://shop.ehobbyasia.com/accessories/r-i...-handguard.html Link to post Share on other sites
bloodybiscuit Posted August 2, 2009 Report Share Posted August 2, 2009 Sometimes, I scare myself. Hope this helps out a bit. Real steel part list, you got to find the replicas Back to Front. Magpul UBR, FDE Gear Sector Two Point Carbine Edition, Dark Earth Magpul MIAD, FDE Magpul Enhanced Trigger Guard, Black Heckler & Koch 416 Sights Set Aimpoint COMP3 American Defense High Profile QD Mount Blue Force Gear Redi-Mod Magpul Pmag, FDE Surefire M900, FDE Daniel Defense M4 9.0 FF, FDE Daniel Defense Rail Mount QD Swivel with PAK™ (Positive Action Knob) Magpul XT Rail Cover, FDE AAC Ranger 2 Suppressor Thank you very much. I saved this and put it into a word doc Link to post Share on other sites
bloodybiscuit Posted August 2, 2009 Report Share Posted August 2, 2009 wait boom! the RIS ill be using now i just need to find a retailer that carries this http://www.kingarms.com/productpage.asp?prodid=1465 Link to post Share on other sites
BrooklynBorn Posted August 2, 2009 Report Share Posted August 2, 2009 (edited) Holy Suitcase! How did Travis end up copying one of my builds down to the arrangement of the XTM rail panels? Going to have to post a new pic of it soon! Could you give a parts list? Even just the front end? Edited August 2, 2009 by BrooklynBorn Link to post Share on other sites
0nslaught Posted August 3, 2009 Report Share Posted August 3, 2009 wait boom! the RIS ill be using now i just need to find a retailer that carries this http://www.kingarms.com/productpage.asp?prodid=1465 Ya i was about to say, instead of the DD you should just find a replica LT rail. here try this: http://www.wgcshop.com/pcart/shopper.php?i...RIS%20and%20RAS and i think on boomarms, they have the trademarked version. Link to post Share on other sites
bloodybiscuit Posted August 3, 2009 Report Share Posted August 3, 2009 Awesome thanks Onslaught! But i think this would be the best base to go with. AHhhh and i just found it today and have yet to check for a retailer selling it http://www.kingarms.com/productpage.asp?prodid=1717 ^^ lol its like God answered my needs! Link to post Share on other sites
reaper16 Posted August 3, 2009 Report Share Posted August 3, 2009 KA makes excellent M4's, I have one as the base of mine as well. Link to post Share on other sites
unas Posted August 3, 2009 Report Share Posted August 3, 2009 (edited) My next build. http://i345.photobucket.com/albums/p399/bl...9621028WEVO.jpg What do you think? Can I get this picture in High Resolution ? Edited August 4, 2009 by IronWolf Quoting Images Link to post Share on other sites
Reincarnation... Posted August 3, 2009 Report Share Posted August 3, 2009 Can I get this picture in High Resolution ? How about not quoting pictures? Anyways, higher res picture here. I just google searched the name of the pictures, seeing how when it was rehosted it was not renamed. Link to post Share on other sites
Titleist Posted August 4, 2009 Report Share Posted August 4, 2009 (edited) If anyone wants to see the Magpul Photos, you can see reference stuff by going to the Flickr link in the real steel thread I posted of the class. Edited August 4, 2009 by Titleist Link to post Share on other sites
gerrysnaps Posted August 4, 2009 Report Share Posted August 4, 2009 Could you give a parts list? Even just the front end? Other folks already identified it as a Troy RAS. It looks like a TROY MRF-MX judging by how much of the barrel sticks out, but this one is supplied and branded specific for the M&P 15T. No idea on barrel length used just from that photo, could be 16", could be 14.5"? Check out more pics from Titleist, or Titleist himself could confirm. Link to post Share on other sites
somegirls Posted August 4, 2009 Report Share Posted August 4, 2009 Removed the PEQ-15. Looks slimmer and I dunno, more straight forward imo. Plus nice DD markings. Link to post Share on other sites
Titleist Posted August 4, 2009 Report Share Posted August 4, 2009 Other folks already identified it as a Troy RAS. It looks like a TROY MRF-MX judging by how much of the barrel sticks out, but this one is supplied and branded specific for the M&P 15T. No idea on barrel length used just from that photo, could be 16", could be 14.5"? Check out more pics from Titleist, or Titleist himself could confirm. 14.5 with the surefire muzzle brake. Link to post Share on other sites
BrooklynBorn Posted August 4, 2009 Report Share Posted August 4, 2009 14.5 with the surefire muzzle brake. Thank You,. I've been realy into Magpul and all this lately. Link to post Share on other sites
Titleist Posted August 4, 2009 Report Share Posted August 4, 2009 After that high of a round count, I am SO ditching the KAC trigger guard, and installing the magpul front strap from the full MIAD kits (NOT THE METAL ONE) as my right hand's middle finger is torn to bits. I should have worn gloves, but that gap on the lower receiver acts as a cheese slicer but on your finger. Link to post Share on other sites
Recommended Posts