Fellowz Posted October 2, 2009 Report Share Posted October 2, 2009 silly question but i must know will the Magpul PTS ACS Stock hold a crane stock battery? i really want one Link to post Share on other sites
Whan Posted October 2, 2009 Report Share Posted October 2, 2009 I don't think so... Will hold AA, but not an actual crane stock battery. Link to post Share on other sites
gerrysnaps Posted October 2, 2009 Report Share Posted October 2, 2009 Very niiiiiiiiiiiiice Trip My PTW with a few Magpul pieces. Had two tone guns since '06 but somehow I feel like I've fallen into a fad! This has reeeally been bothering me, teetee, and so far nobody else has asked: Why put a backup front sight on top of a flipup front sight gas block? Sure the MBUS F is lightweight, but still... Link to post Share on other sites
RacingManiac Posted October 2, 2009 Report Share Posted October 2, 2009 This has reeeally been bothering me, teetee, and so far nobody else has asked: Why put a backup front sight on top of a flipup front sight gas block? Sure the MBUS F is lightweight, but still... you may also melt the plastic MBUS on an actual gas block.... Link to post Share on other sites
talon_0315 Posted October 2, 2009 Report Share Posted October 2, 2009 This has reeeally been bothering me, teetee, and so far nobody else has asked: Why put a backup front sight on top of a flipup front sight gas block? Sure the MBUS F is lightweight, but still... you may also melt the plastic MBUS on an actual gas block.... What Racing Maniac said. Magpul Industries reps (not PTS) said that the MBUS was never meant to be put directly on a gas block (direct impingement or piston) because the heat would melt the sight. Magpul's MBUS were meant for rail systems only. If that was a real rifle, teetee would likely put the MBUS at the very front of the RIS. Link to post Share on other sites
The Crunchy Bunny Posted October 2, 2009 Report Share Posted October 2, 2009 True XTM's are lower priced, and are very easy to attach to proper spec rails, I also like being able to make them into a camo pattern, even though I dont..since im an FDE junkie. I bought true XTM's, the ones that sell for like $7.50. I can't just slide or snap them on like other railcovers. I have to line up the two halves and snap them together. Way slower then any other railcovers. Taking them off is way to slow, like if I want to take one off on the field and replace it with a torch or something. Even when using 5.56 rounds, taking them off is still akward, espeically when on the field. IDK why, but KAC railcovers feel pretty good grip wise, as opposed to the XTM ones. Vic, i'll try stippling them, that is as soon as I get a soldering iron. Link to post Share on other sites
reaper16 Posted October 3, 2009 Report Share Posted October 3, 2009 I bought true XTM's, the ones that sell for like $7.50. I can't just slide or snap them on like other railcovers. I have to line up the two halves and snap them together. Way slower then any other railcovers. Taking them off is way to slow, like if I want to take one off on the field and replace it with a torch or something. Even when using 5.56 rounds, taking them off is still akward, espeically when on the field. IDK why, but KAC railcovers feel pretty good grip wise, as opposed to the XTM ones. Vic, i'll try stippling them, that is as soon as I get a soldering iron. Yes, because removing the vert grip and lights and remounting them perfectly is so much easier....How on earth? Is sliding a rail cover on faster than being able to snap it on, actually it should take about the same amount of time. If it takes that long to line them up then, well thats another issue. Those things are quick as heck. And you wouldnt be removing rail covers in the middle of combat anyway,. You would do so away from the fight, such as when loose 5.56 rounds would be right next to you. Link to post Share on other sites
elrey Posted October 3, 2009 Report Share Posted October 3, 2009 I know that talking about rail covers is a blast, but I'd like to see more photos on this page. I don't want to be a hypocrite though, so here's my contribution: Link to post Share on other sites
MCXL Posted October 3, 2009 Report Share Posted October 3, 2009 LOL, good one. Link to post Share on other sites
Victory Posted October 3, 2009 Report Share Posted October 3, 2009 (edited) I know that talking about rail covers is a blast, but I'd like to see more photos on this page. I don't want to be a hypocrite though, so here's my contribution: http://i7.photobucket.com/albums/y282/dane...ToGermany-1.jpg Hey elrey...what rail covers are those? Here's a reference picture of Travis' rifle, which includes stippled XTMs. Not sure why the stippled area is blackened. Maybe he painted them for contrast? As far as I know, stippling them does not blacken them. I guess I'll find out soon enough. TCB, here's a guide on How-To Stipple Polymer: http://www.ar15.com/forums/topic.html?b=6&...19&t=261758 I plan on doing that here pretty soon. -Vic Edited October 3, 2009 by Victory Link to post Share on other sites
fiddlesticks4220 Posted October 3, 2009 Author Report Share Posted October 3, 2009 tTheir not painted, when u stipple the FDE stuff they make, it turns funny colors Link to post Share on other sites
uscmCorps Posted October 3, 2009 Report Share Posted October 3, 2009 Yup. Titleist got some of his black KAC panels stipples recently. Originally he wanted to get his Taupe/Tan/FDE KAC panels done, but the guy told him not to bother as they'd dramatically change color to almost black or at least a charred dark brown. Same as what you're seeing on Haley's XTM panels. Link to post Share on other sites
The Crunchy Bunny Posted October 3, 2009 Report Share Posted October 3, 2009 Thanks for the guide Vic. Luckily mine are black, so as soon as I get a soldering iron. I'll get right on it. Remember were talking about airsoft, reaper16............ Usually I don't have loose 5.56 rounds next to me on the skirmish field.......... Link to post Share on other sites
Victory Posted October 4, 2009 Report Share Posted October 4, 2009 Yup. Titleist got some of his black KAC panels stipples recently. Originally he wanted to get his Taupe/Tan/FDE KAC panels done, but the guy told him not to bother as they'd dramatically change color to almost black or at least a charred dark brown. Same as what you're seeing on Haley's XTM panels. That's what I had thought, until I saw pictures like these: (Reference Picture) -Vic Link to post Share on other sites
RacingManiac Posted October 4, 2009 Report Share Posted October 4, 2009 might not be the same plastic for the PMAG vs the rail panel.... Link to post Share on other sites
Victory Posted October 4, 2009 Report Share Posted October 4, 2009 Found this while looking for pictures: According to people that have done it, they will retain their color as long as you keep your contact with the material as brief as possible to get the desired effect. Leave the soldering iron on for too long, and they will blacken. Ok, so, that solves that. Back to more rifle pictures! -Vic Link to post Share on other sites
BrooklynBorn Posted October 5, 2009 Report Share Posted October 5, 2009 Just curious, what what barrel length does the G&P WOC Sr15 have, stock? Link to post Share on other sites
somegirls Posted October 5, 2009 Report Share Posted October 5, 2009 14,5", I think. Link to post Share on other sites
Titleist Posted October 5, 2009 Report Share Posted October 5, 2009 KAC panels don't use the same material. You're comparing the magpul's polymer to the KAC stuff. The KAC stuff discolors. Link to post Share on other sites
Hispeed1 Posted October 5, 2009 Report Share Posted October 5, 2009 @ NoTrace: nice SR-25 build there. I've been thinking about building an SR-25 version of Costco's rifle that you all built. Possible specs: 11.5" barrel, mid-length URX, etc. Link to post Share on other sites
oliverlove Posted October 6, 2009 Report Share Posted October 6, 2009 No Trace 13 - Thanks a great looking Replica!! Nice Job. Link to post Share on other sites
The Crunchy Bunny Posted October 7, 2009 Report Share Posted October 7, 2009 Vic, you wouldn't happen to have a pic of that whole rifle would you? Link to post Share on other sites
Hispeed1 Posted October 7, 2009 Report Share Posted October 7, 2009 Vic, you wouldn't happen to have a pic of that whole rifle would you? Duck & cover! It's the Arnies' RS police!! Link to post Share on other sites
fiddlesticks4220 Posted October 7, 2009 Author Report Share Posted October 7, 2009 Yeah, their gonna come and get us, No one by chance has been able to source a picture of a PTS Masada yet ?? Link to post Share on other sites
uscmCorps Posted October 7, 2009 Report Share Posted October 7, 2009 (edited) No one by chance has been able to source a picture of a PTS Masada yet ?? You won't see one until they're ready to formerly announce it. Everyone on their staff have signed NDA's and they're very careful about who has access to it. When I went to visit the gun was hidden in parts all over the place and had to be brought together to be assembled to show me (which didn't take long). None of the local HK distributors have even laid eyes on it. you won't see pics until right before release ... which won't be that long. * And in the best interests of keeping this thread pertinent to the topic at hand, any questions that I can answer (which aren't much) will only be addressed in the Magpul Masada Thread in the General Discussion Forum. Sorry mods. Edited October 7, 2009 by uscmCorps Link to post Share on other sites
Recommended Posts