PianoBlack Posted July 25, 2009 Report Share Posted July 25, 2009 (edited) The rear sight looks like a Troy BUIS, but I'm not sure about the front one. It looks similar to the KAC SR-25 style or a modified Troy HK. -Piano *edit* Or it could be Yankee Hill Machine Co's Forearm Mounted Front Flip Sight and Flip Rear Sight. Edited July 25, 2009 by PianoBlack Link to post Share on other sites
Whitehawk Posted July 27, 2009 Report Share Posted July 27, 2009 Im going to replace that eotech with acog.. Someday. (My pc didnt want to flip that picture cw, sorry about that). Link to post Share on other sites
BigBabyMoses06 Posted July 27, 2009 Report Share Posted July 27, 2009 G&G Based. Clone GB and lower receiver(original cracked) Link to post Share on other sites
fiddlesticks4220 Posted July 27, 2009 Report Share Posted July 27, 2009 Missing mag catch... Link to post Share on other sites
RUSHER2 Posted July 28, 2009 Report Share Posted July 28, 2009 Picture request? A MK 18 mod 0 with a VITAL-2 laser on? oh and a quesrion will a eotech 553 be high enough to cover that peq? looks kinda big. So would i be good with a larue tactical eotech riser? Link to post Share on other sites
fiddlesticks4220 Posted July 28, 2009 Report Share Posted July 28, 2009 You will for sure be good with the Larue riser. Link to post Share on other sites
flapjak Posted July 28, 2009 Report Share Posted July 28, 2009 Externals are primarily G&P What length RIS is this 9.5" ? And what length outer barrel? It looks perfect. Link to post Share on other sites
Jetser200SX Posted July 28, 2009 Report Share Posted July 28, 2009 A little old school, bone stock TM M16A2. Got it last June with plans to turn it into an A4 but the more I looked at it the more I liked it and just decided to leave it alone. Link to post Share on other sites
cstrikeman Posted July 28, 2009 Report Share Posted July 28, 2009 What length RIS is this 9.5" ? And what length outer barrel? It looks perfect. 9.5 inch rail on 11.5 inch outer barrel. Link to post Share on other sites
SHWEL Posted July 28, 2009 Report Share Posted July 28, 2009 (edited) My Primary: ICS Pistol converted Systema Bore up Kit 9.6v Tenergy 2000mah (ROF 17) Crane Stock Cast Iron Hi Heat Paint NC Star Mark III Scope/Red Dot ICS 3000 Motor My CQB setup DPMS M4 Upgraded internals (Having a brain dump right now) MOSFET (Basic HH) 8.4v 1100 mah (ROF 17) ICS Pistol Front End (Originally S-System) Stock Motor (Hi Torque) TRUGLO Red Dot Edited July 28, 2009 by SHWEL Link to post Share on other sites
ssddismymotto Posted July 28, 2009 Report Share Posted July 28, 2009 a tad overzealous with the acu tape wouldn't you say? Link to post Share on other sites
SHWEL Posted July 28, 2009 Report Share Posted July 28, 2009 (edited) a tad overzealous with the acu tape wouldn't you say? Definitely..... It is reusable, so I was having fun with it. I plan on having that CQB M4 strapped to my back at all times, so I was playing with the idea of it being covered in ACU tape... I'll prob give it a try at the next Op... And it is done on this level of overdone on this site yet, so I had to do something to make mine a little diff from the rest... The Armalites on this site are spectacular, and it is hard to find a mod that has not been done. Edited July 28, 2009 by SHWEL Link to post Share on other sites
nasty-nate Posted July 28, 2009 Report Share Posted July 28, 2009 all armalites, all the time ask for build lists CA cqb compact... currently a WIP. hopefully it'll be done soon: G&P m4.. 390 fps, 18 BPS and my baby: CA m4.. 375 fps, 22 BPS, hits man sized targets at ~200' Link to post Share on other sites
psantos Posted July 28, 2009 Report Share Posted July 28, 2009 (edited) Here is my M4 (was made with a variety of parts that came up here, exchanges and other purchased) and become this: (yellow paint is Portuguese law) I will replace the grip by a gripod Edited July 28, 2009 by psantos Link to post Share on other sites
Black Stena Posted July 29, 2009 Report Share Posted July 29, 2009 What's that, a dark pink? Link to post Share on other sites
Unit 318 Posted July 29, 2009 Report Share Posted July 29, 2009 G&P m4.. 390 fps, 18 BPS Sooo hot. Nice job! Link to post Share on other sites
nasty-nate Posted July 29, 2009 Report Share Posted July 29, 2009 Sooo hot. Nice job! why thank you haha, I've been working on the last two for quite sometime now, and I think I finally got them to where I want em performance wise Link to post Share on other sites
Hispeed1 Posted July 29, 2009 Report Share Posted July 29, 2009 Picture request? A MK 18 mod 0 with a VITAL-2 laser on? oh and a quesrion will a eotech 553 be high enough to cover that peq? looks kinda big. So would i be good with a larue tactical eotech riser? I don't have a pic but I'm sure about this. A replica/real EOTech 553 will clear a VITAL-2 laser on the rail because the mount gets it higher for better sighting/co-witness and clearance of PEQ devices. A replica LaRue tactical EOTech riser with an EOTech 551/552 will ge good to go also. EBB and other HK online dealers sell the replica riser, its adjustable just like the real one. Link to post Share on other sites
RUSHER2 Posted July 29, 2009 Report Share Posted July 29, 2009 I don't have a pic but I'm sure about this. A replica/real EOTech 553 will clear a VITAL-2 laser on the rail because the mount gets it higher for better sighting/co-witness and clearance of PEQ devices. A replica LaRue tactical EOTech riser with an EOTech 551/552 will ge good to go also. EBB and other HK online dealers sell the replica riser, its adjustable just like the real one. Yea my bad. i meant the 552 my mistake. The 553 is a tad bit higher so it would clear. Looks like ima get a riser from ebb. Link to post Share on other sites
Squab27 Posted July 30, 2009 Report Share Posted July 30, 2009 UTG Combat Machine KWA M16 Link to post Share on other sites
J-Rock_14 Posted July 31, 2009 Report Share Posted July 31, 2009 I need a new AEG, and I've chosen an M4. ( Yeah, real creative, I know. XD ) I've always liked the look of the carry-handle mounted optics, and the overall profile of the M4. I hate LE stocks. I don't like the fact that they have a good deal of wobble after a while, and I also like being able to use large batteries. I also want a rifle that I can use with any of my gear. ( Which is everything, except for my Flecktarn. ) So here's my question: Does this setup look good, both in the practical and looks forms? Link to post Share on other sites
Squab27 Posted July 31, 2009 Report Share Posted July 31, 2009 It dosent look bad, Although I personally would choose a black suppressor (unless your changing other furniture to OD) Link to post Share on other sites
-MOOSE- Posted July 31, 2009 Report Share Posted July 31, 2009 Looks good, I'd probably ditch the Leapers sight. IDK but a friend had one and the lens turned very orange after exposure to the sun, because of that optics rim around the front lens it will shade some sunlight but not everything, as all standard optics. IDK how that specific one will perform. A good optic is a G&P AimPoint, they're more expensive but worth it, I would say. I did need to modify the adjustment knobs a bit, I added more material to the ends to make them longer. Link to post Share on other sites
Recommended Posts