TheFull9 Posted March 7, 2010 Report Share Posted March 7, 2010 I presume that's a RS rail system of some kind QDR? Whereabouts can they be had? Link to post Share on other sites
BrooklynBorn Posted March 8, 2010 Report Share Posted March 8, 2010 I presume that's a RS rail system of some kind QDR? Whereabouts can they be had? I think the bottom 2 guns are both RS, completely. Link to post Share on other sites
slu Posted March 8, 2010 Report Share Posted March 8, 2010 (edited) Why would you say that? Could be WAM4s, the one with the POF upper may have had that upper modified for airsoft use. King Arms makes a SW M&P lower. The SW on the bottom does look pretty convincing because of the M&P stamp on the Samson rail. I think you'd only find that on prebuilt SW ARs. Who knows. Edited March 8, 2010 by slu Link to post Share on other sites
BrooklynBorn Posted March 8, 2010 Report Share Posted March 8, 2010 Why would you say that? Could be WAM4s, the one with the POF upper may have had that upper modified for airsoft use. King Arms makes a SW M&P lower. The SW on the bottom does look pretty convincing because of the M&P stamp on the Samson rail. I think you'd only find that on prebuilt SW ARs. Who knows. The King Arms lowers have white trades. http://www.kingarms.com/productpage.asp?prodid=1665 The rails were also another point. Fine, the middle one could be airsoft, since every GBBR can use anti-rotation links, but the bottom one, I'm almost sure is RS. Link to post Share on other sites
speedracer9220 Posted March 8, 2010 Report Share Posted March 8, 2010 (edited) Here is mine Edited March 8, 2010 by speedracer9220 Link to post Share on other sites
QDRenegade Posted March 8, 2010 Report Share Posted March 8, 2010 I think the bottom 2 guns are both RS, completely. Correct. Its a 12" POF rail on a GG&G upper receiver. The middle one, however, varies. The only difference between the parts on the AR15 and AEG are the KNS pins. Between the builds, there is no other way to differentiate them (short of seeing whats in the mags). This is the AEG with parts transferred over: Ive since replaced the knockoff 553 with a real 551. Acessories aside, the only real tell is the KNS pins and the third safety position. And even still Ive seen people glue them on the AEG I presume that's a RS rail system of some kind QDR? Whereabouts can they be had? Its a Patriot Ordinance Factory Predator System. The large inner diameter is used for piston conversions on AR15s and is great for housing batteries. The upper AEG has a P9X and the middle has a P12X. They're super nice but are a little pricey. I made a whole writeup about installing the barrel nut and rail onto an AEG if you decide to try it our or see what it involves. Ill try to track it down. P9X P12X Side by side Cheers! Link to post Share on other sites
aznconverter Posted March 8, 2010 Report Share Posted March 8, 2010 I feel like im more interested in your camera set up than your airsoft setups! Link to post Share on other sites
Cosmitz Posted March 8, 2010 Report Share Posted March 8, 2010 I feel like im more interested in your camera set up than your airsoft setups! I second that. Link to post Share on other sites
hwagan Posted March 8, 2010 Report Share Posted March 8, 2010 *snip* Dude, seriously. I've just found myself sexually attracted to a rail system. This can't be good at all. Link to post Share on other sites
1st_shooter Posted March 8, 2010 Report Share Posted March 8, 2010 Finished this today, I had bought a replacement front sight but at this time i really dont want to have to take the whole front end off to change it! Link to post Share on other sites
BigBabyMoses06 Posted March 8, 2010 Report Share Posted March 8, 2010 ^ ^ Nice guns!!! ^ ^ MAID and rear wire harness on the way Link to post Share on other sites
hwagan Posted March 8, 2010 Report Share Posted March 8, 2010 Troy rear sights FTW... Much nicer apertures than MBUS, in my opinion anyway. Link to post Share on other sites
TheFull9 Posted March 8, 2010 Report Share Posted March 8, 2010 Its a Patriot Ordinance Factory Predator System. The large inner diameter is used for piston conversions on AR15s and is great for housing batteries. The upper AEG has a P9X and the middle has a P12X. They're super nice but are a little pricey. I made a whole writeup about installing the barrel nut and rail onto an AEG if you decide to try it our or see what it involves. Ill try to track it down. Someone somewhere definitely needs to get on to replicating these for AEGs... Definitely would be interested in that guide if you can dig it up mate. Link to post Share on other sites
uscmCorps Posted March 8, 2010 Report Share Posted March 8, 2010 It's a shame the RS POF guns are so unreliable. The rails are nicely made though (but too fat for my personal taste). Nevertheless, great pics QDRenegade. I'd also like to know your photography setup. Link to post Share on other sites
Squab27 Posted March 8, 2010 Report Share Posted March 8, 2010 Moses, Hott rifle! Link to post Share on other sites
newhotness Posted March 9, 2010 Report Share Posted March 9, 2010 Something To Post Link to post Share on other sites
halofanatic333 Posted March 9, 2010 Report Share Posted March 9, 2010 Moses, Hott rifle! -snip- The snow only makes it that much cooler. In Florida it was like 40 on friday than 60/70 the next day :/ Only been getting hotter. Link to post Share on other sites
Laursen Posted March 9, 2010 Report Share Posted March 9, 2010 Here's my M4. Just finished the paintjob... Wanted a used dusty desert-like look... Link to post Share on other sites
msx361 Posted March 9, 2010 Report Share Posted March 9, 2010 Hot! Guide or tips? Link to post Share on other sites
kingdong Posted March 9, 2010 Report Share Posted March 9, 2010 i thought the sentry just come out? i like the wearing tecnique though Link to post Share on other sites
Laursen Posted March 9, 2010 Report Share Posted March 9, 2010 Hot! Guide or tips? Spray paint your gun with a desert color paint. No need to cover the gun completely as most of the paint will be removed afterwards. When the paint is dry take a cloth, put on some acetone and start to rub of the paint. Don't press too hard as it will create some naked spots which will look weird. You want a look as the gun is very dusty and you just wiped off most of the dust with a cloth. That's basically it... I removed the red dot, PEQ, light, vertical foregrip and stock and did them individually. You will need a good amount of acetone, 200-400 ml. So do it in a good ventilated place, outside is preferred. Link to post Share on other sites
Laursen Posted March 9, 2010 Report Share Posted March 9, 2010 i thought the sentry just come out? i like the wearing tecnique though Thanks... I think the Sentry has been around for some time... However, I just got mine a week ago Link to post Share on other sites
RacingManiac Posted March 10, 2010 Report Share Posted March 10, 2010 Link to post Share on other sites
Genome Posted March 10, 2010 Report Share Posted March 10, 2010 Nice gun RacingManiac. Similar to what I would like to build. I also want an opinion on the build I would like to do. I have a standard G&P M4. I want to get: Madbull Noveske 10" Vltor gasblock/ironsight Magpul CTR stock (FDE) Magpul MIAD (FDE) Vltor "flower" Flashhider or Noveske Comp. Magpul MBUS rear IS or Troy rear IS What is your 2 cents. Link to post Share on other sites
Marcino Posted March 10, 2010 Report Share Posted March 10, 2010 10th SFG kit preparations. M4 - done. Link to post Share on other sites
Recommended Posts