Kiki-Jiki Posted October 21, 2009 Report Share Posted October 21, 2009 (edited) Is the recoil worth ~1800$ pricetag? Absolutely. You know...when it works. Edit: For the record, even if it was an AEG it would still have cost me easily over $1000, probably relatively close to $1800 for all that stuff and in AEG form. And to be honest, I kind of wish it was an AEG just so it'd be more reliable... Edited October 21, 2009 by Kiki-Jiki Quote Link to post Share on other sites
tomster Posted October 21, 2009 Report Share Posted October 21, 2009 Panzergraf, that is THE MOST impressive airsoft related item I have ever seen! Just having that makes it cool enough. It would be the centerpiece in my livingroom! Quote Link to post Share on other sites
Whudafxup Posted October 21, 2009 Report Share Posted October 21, 2009 I don't want to know how much this has cost me. It's over $1k.. Parts list: Tokyo Marui VSR-10 G-Spec Laylax VSR-10 170SP Spring Laylax VSR-10 Cylinder Head Laylax VSR-10 Teflon Cylinder Laylax VSR-10 Spring Guide w/bearing Laylax VSR-10 Zero Trigger w/ Piston Edgi Custom Ported 6.01 435mm Inner Bull Barrel TDC Hop Up System TF Bucking and Sleeve PDI VSR-10 Receiver PDI VSR-10 Bull Barrel Base PDI VSR-10 Bull Barrel P PDI VSR-10 Bull Barrel Cap King Arms Spring Eject Bipod Barska 3-9x40mm Scope Quote Link to post Share on other sites
wazzy1013 Posted October 22, 2009 Report Share Posted October 22, 2009 Whuda- how do you like the TDC hopup system; as when i get my VSR, im stuck b/t that and the precision hopup unit Quote Link to post Share on other sites
Whudafxup Posted October 22, 2009 Report Share Posted October 22, 2009 Whuda- how do you like the TDC hopup system; as when i get my VSR, im stuck b/t that and the precision hopup unit Without a doubt go with the TDC hop up system and TF bucking with sleeve. The design is simple and effective. It takes away a lot of the precise tuning needed with the stock VSR setup. I can take down my hop up and do any maintenance or tuning SO much faster than before, i love it. Quote Link to post Share on other sites
SuperJesus37 Posted November 3, 2009 Report Share Posted November 3, 2009 Quote Link to post Share on other sites
08kecarv Posted November 3, 2009 Report Share Posted November 3, 2009 Yay another Tanaka!!!! I AM NOT ALONE.... Quote Link to post Share on other sites
RC-1138 Posted November 3, 2009 Report Share Posted November 3, 2009 My ancient "Ship of Thebes" CA M15A4 is easy cost me over $1000. $325.00 base price for gun (bought it in 2002-2003 I think) $150.00 worth of upgrades I had put in right away (Basic package, M120, Promo thightbore, re-shimmed/bushing's changed, and upgraded wires). $200.00 G&P Metal Body $70.00 (I think) CA RIS w/ rail covers and grip $70.00 for M4+ Barrel (405mm iirc) $150.00 HurricanE CLT Body $189.00 Systema FTK M4 M150 $60.00 Deepfire V2 Gearbox I'm sure I'm missing something, I just can't remember what. I think the only thing on it that's "original" is the stock tube, stock and carry handle (which I never use generally speaking). And in the end.... it still looks like a normal M4 :S For about $350 my Star M4A1 looks the same and shoots better.... go figure. Quote Link to post Share on other sites
reaper16 Posted November 4, 2009 Report Share Posted November 4, 2009 I feel ya, it took me forever to get my CA m4 shootin how i wanted, and i just traded her off. Quote Link to post Share on other sites
Waldgeist Posted January 18, 2010 Report Share Posted January 18, 2010 (edited) My VSR m40a3 , fortress stock, vsr with full internal upgrade inc damper head and pdi 6.05 Niice ... Here's mine ... Custom Sun Project M40A3 Sun Project M40XB Fortress M40A3 Stock Sun Project Steel Trigger with Bearing K2 Steel Sear PDI Cylinder Set PDI 9mm Spring Guide PDI Adjustable Hop-up Chamber First Factory PSS2 170 Spring PDI SPR Flashhider King Arms Silencer (14mm-) Prometheus 6.03 EG Barrel Guarder Barrel Spacer PDI Thrust Rings Guarder Scope Mount Base G&P 30mm Mount Rings (Low Type) Leapers 3-12X44 30mm Mil-Dot Scope Tenebraex Sunguard ARD (Anti-Reflection-Device) Butler Creek Multi-Flex Flip-Open Scope Covers KM Sniper Rifle Sling First Factory QD Sling Swivels I'll get a Bipod and a Ops Inc (SPR) type silencer next month. Edited January 18, 2010 by Waldgeist Quote Link to post Share on other sites
-=OGGY=- Posted January 18, 2010 Report Share Posted January 18, 2010 Soooooooooo nice! How does it shoot? Also have you done anything to your stock to make it less fragile? -OGGY Quote Link to post Share on other sites
Waldgeist Posted January 18, 2010 Report Share Posted January 18, 2010 (edited) Thx! The performance is insane ... i can hit 30cmx30cm targets at a distance of 80m. I use Maruzen Grand Master 0,29g. The stock has been slightly modified to fit the M40 but it feels bombproof. The stock is pretty solid ... Edited January 19, 2010 by IronWolf Quote Link to post Share on other sites
eel one [COE] Posted January 29, 2010 Report Share Posted January 29, 2010 Making it to the 1K$ club is way to easy. To many weapons gets in by default alone by the price tag of the stock version. In my book it only counts as a membership if the modifications and add ons are worth at least 1k$. Anyway. Presenting my Systema PTW Max ´08 M4 CQBR nick named "Project Screaming Weasel": Tango Down grip VLTOR Flash Hider VLTOR CASV-EL foregrip Magpul Dynamics CTR stock Magpul Dynamics ASAP sling attachment Magpul Dynamics AFG front grip Trijicon ACOG TA50-2 Surefire M951 torch Falcon railcovers Madbull HALO silencer Never Quit Magwell Grip PDI tight bore barrel Clone "LaRue" 4XDOS scope mount Clone "VLTOR" VST gasblock Im still short af a few parts like a magpul BAD and RSA as well as a Knights Arnament tear drop trigger guard and the clone products need to be replaced by originals. Quote Link to post Share on other sites
UrbanMarine Posted January 29, 2010 Report Share Posted January 29, 2010 (edited) Systema M4A1 PTW FAB Defense Magwell Grip Magpul Enhanced Trigger Guard KA G27 Pistol Grip Versa Pod 480 Knights Armament Company RAS w/KAC Panels Fenix TA21 Tactical Light w/TA21 Pressure Switch G&P 1:1 4x32 ACOG w/Trijicon TA57 Tenebraex killFLASH & Docter reddot @eel one. Magpul BADs do not work properly with PTWs. Edited January 29, 2010 by UrbanMarine Quote Link to post Share on other sites
L4byr1nth Posted January 29, 2010 Report Share Posted January 29, 2010 Making it to the 1K$ club is way to easy. To many weapons gets in by default alone by the price tag of the stock version. In my book it only counts as a membership if the modifications and add ons are worth at least 1k$. Of course it is... when you start with a Systema PTW and then slap loads of RS parts on I have quite a few guns to go in here... Where's that picture of my old A.I.C.S...? Ben. Quote Link to post Share on other sites
Kraut Posted January 29, 2010 Report Share Posted January 29, 2010 @eel one. Magpul BADs do not work properly with PTWs. PTS make PTW/WE specific BADs. Quote Link to post Share on other sites
UrbanMarine Posted January 29, 2010 Report Share Posted January 29, 2010 (edited) PTS make PTW/WE specific BADs. Tried both and it still disabled the gun. It's a balance issue causing the internal lever to rise which makes the gun think it's empty. Also GBBRs use a BC so it functions like RS where as the PTW uses a pressure switch. Through trial and error, I've found some clone or legit items do not function properly with PTWs. Edited January 29, 2010 by UrbanMarine Quote Link to post Share on other sites
hwagan Posted January 29, 2010 Report Share Posted January 29, 2010 (edited) Finally i can post here! Right, this started life as nothing more than an idea - It's built from nothing using an awful lot of expensive parts. I decided, as much as i like my vaguely realistic looking AR's, that i'd always been building and buying guns that look like something i'd already seen. So, i decided i'd have one built that i'd designed from the ground up, with all thoughts of realism out the window. The whole point of this build was to look as badass as i could possibly make it - Kind of anti-milsim I call it the HBRA1 - Hwagan's Badass Rifle, A1. Phone camera pics, unfortunately... At today's exchange rate, it comes to $1,200 or so, and is made out of: G&P 8mm bearing gearbox, gears and the rest. Madbull M100 spring, shooting at around 330. Tokyo Marui EG700 Guarder 300mm TBB G&P 'Navy Seal' MBK with Ambidextrous mag catch G&P One piece hop Madbull Blue bucking, guarder nub G&P Shorty Marine battery stock G&P 9.6v 3300Mah battery for the above Magpul MOE grip TM ergo VFG Unknown make Medieval flash-hider/face-ruiner/steak-tenderiser KA 10.5" silver outer barrel ICS 'Tsunami' RAS - amazing bit of kit for £60 KA Troy style BUIS Clone Eotech 552 I love it more than anything i've ever loved, frankly. I've never seen any kind of AR using the same combination of parts, and it really does stand out in a pile of realisticish M4's. Edited January 29, 2010 by hwagan Quote Link to post Share on other sites
jgarnreiter Posted January 30, 2010 Report Share Posted January 30, 2010 Ok well I didn't think Seraphim would spoil the surprise that quickly but here it is anyway; My new Elcan SpecterDR - SOCOM variant ...and now it's time to post this on every single weapon thread Hands down the nicest set up I've seen. OH. MY. GAWD! I think I would have a slightly longer RIS and maybe a AFG, but besides that, I'm in love. HUGE KUDOS! Quote Link to post Share on other sites
league 4 Posted February 7, 2010 Report Share Posted February 7, 2010 TOP M249 with a PGC gearbox, Prommy barrel, and a G&P PARA stock ($1400ish): Custom SPR, built from ground up and can't remember all the parts used ($1600ish): TOP M60E4 with ANGS gears and an ANGS cylinder kit ($1100ish): G&P M249 Ranger with a Prommy tightbore and a Systema magnum motor with a custom box mag ($1000ish): Quote Link to post Share on other sites
slu Posted February 14, 2010 Report Share Posted February 14, 2010 Repost from GGI, but this definitely qualifies. Quote Link to post Share on other sites
Stealthbomber Posted February 14, 2010 Report Share Posted February 14, 2010 My ancient "Ship of Thebes" CA M15A4 is easy cost me over $1000. $325.00 base price for gun (bought it in 2002-2003 I think) $150.00 worth of upgrades I had put in right away (Basic package, M120, Promo thightbore, re-shimmed/bushing's changed, and upgraded wires). $200.00 G&P Metal Body $70.00 (I think) CA RIS w/ rail covers and grip $70.00 for M4+ Barrel (405mm iirc) $150.00 HurricanE CLT Body $189.00 Systema FTK M4 M150 $60.00 Deepfire V2 Gearbox I hardly think a gun qualifies if you need to take into account parts that you fitted then subsequently replaced again. Quote Link to post Share on other sites
Noveske Posted February 18, 2010 Report Share Posted February 18, 2010 (edited) I guess most of my pieces fall into yet another (this) category (other than the Magpul picture thread), so I guess I'll post again! 1.Magpul-LaRue M4 Parts: -Prime Magpul Lower -Prime MUR-1 Upper -RS Magpul UBR -RS LaRue LT15-9 (9.0") Freefloat Rail -Prime 12.5" Noveske Stainless Steel Barrel -RS M16A2 Flashider -Prime CNC AEG barrel-compatible hop-up chamber -KM 6.04 tightbore inner barrel -Prime Barrel extention -Prime Noveske Stainless Steel Gas Block -Prime (G&P) Lower receiver parts -Airsoft Surgeon Bolt Carrier -G&P PPAS Nozzle -G&P Ambi mag-catch -RS Magpul BUS -RS Magpul MIAD -RS Magpul AFG -RS Streamlight TLR-1 -RS EOTech 551 with LaRue ECOS-C Raiser -RS FAB Polymer Dust Cover -PEQ-15 Replica Edited February 18, 2010 by Noveske Quote Link to post Share on other sites
Noveske Posted February 18, 2010 Report Share Posted February 18, 2010 (edited) 2. Magpul-VLTOR M4 (EOD Style) Parts: -G&P M4A1 Upper & Lower Receiver -G&P Lower Receiver Parts -G&P Bolt Carrier -G&P PPAS Nozzle -G&P Steel 10.5" outer barrel -Prime Barrel Extention -Prime CNC AEG barrel-compatible hop-up chamber -KM 6.04 tightbore inner barrel -G&P Anti-rotation links -G&P Ambi-mag catch -RS Magpul M93B with rubber pad & breacher toe -RS VLTOR CASV-ELT -RS A.R.M.S #41 Front Iron Sight -RS Troy rear BUIS -RS Magpul MIAD -RS Tangodown shorty grip -RS FAB Polymer Dust Cover -RS EOTech 553 -PEQ-15 Replica -RS VLTOR Flashider -Magpul PTS-GEMTECH Supressor Edited February 18, 2010 by Noveske Quote Link to post Share on other sites
Whan Posted February 18, 2010 Report Share Posted February 18, 2010 Damn noveske, do you like work at Redwolf Airsoft or something and just grab whatever parts you want? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.