Interficium Posted March 11, 2013 Report Share Posted March 11, 2013 Max range is like 300-330. It shoots so hot, its only legal at 1 certain field, for certain events. -Hawaiian What's your MED on that thing? Quote Link to post Share on other sites
3vi1-D4n Posted March 11, 2013 Report Share Posted March 11, 2013 (edited) Only the GPMG is over $1k USD, the rests are sub $1k. Edited March 11, 2013 by 3vi1-D4n Quote Link to post Share on other sites
hawaiianjuggernaut Posted March 11, 2013 Report Share Posted March 11, 2013 What's your MED on that thing? MED for the field is technically 50ft, I dont like shooting people closer than 75ft with it though. I can get relatively consistent head shots at 200ft with .36s, consistency increases dramatically with .43s (230ft headshots with .43s) Funniest thing is that I don't even have an R-Hop in it. Planning on dropping it in eventually, expected max range after RHop install is in the high 300s. I cant even explain how much fun it is to hit people from 200+ ft and they don't even know where the shots came from! -Hawaiian Quote Link to post Share on other sites
TheGreatMrPoo Posted March 12, 2013 Report Share Posted March 12, 2013 Just got it in today M240b with polarstar engine Quote Link to post Share on other sites
hawaiianjuggernaut Posted March 12, 2013 Report Share Posted March 12, 2013 Holy mother of the Me Gusta face... That. Is. Epic. I really want to do a P* M249 when they finalize the Version 8 engine. -Hawaiian Quote Link to post Share on other sites
TheGreatMrPoo Posted March 12, 2013 Report Share Posted March 12, 2013 They currently don't make the m240b engine anymore, due to the fact that the m240b is no longer being made. Heard this from the P* guys themselves. Quote Link to post Share on other sites
3vi1-D4n Posted March 12, 2013 Report Share Posted March 12, 2013 (edited) The P* engine is a replacement for an A&K mechbox or an Ino mechbox? Edited March 12, 2013 by 3vi1-D4n Quote Link to post Share on other sites
TheGreatMrPoo Posted March 12, 2013 Report Share Posted March 12, 2013 It's a complete replacement, you can go to Bingoairsoftworks.com to see some custom stuff done. He did my Real Sword SVD. Quote Link to post Share on other sites
hawaiianjuggernaut Posted March 12, 2013 Report Share Posted March 12, 2013 The P* engine is a replacement for an A&K mechbox or an Ino mechbox? Well, Polarstar is still developing the M249 engine. not sure when it is gonna get released. Quote Link to post Share on other sites
3vi1-D4n Posted March 12, 2013 Report Share Posted March 12, 2013 I mean, For the M240B, did they do one for the Echo 1 (A&K) or the Inokatsu? Quote Link to post Share on other sites
hawaiianjuggernaut Posted March 12, 2013 Report Share Posted March 12, 2013 It was for the Echo1, IDK if itll fit in the inokatsu. -Hawaiian Quote Link to post Share on other sites
6ft4 Posted March 24, 2013 Report Share Posted March 24, 2013 VFC HK416 GBB RS parts are below PVS14 with GG&G NVG Tall mount Aimpoint M2 with Arms' M68 mount PEQ2A Grippods M952V with LT270 Quote Link to post Share on other sites
Failcat Posted March 25, 2013 Report Share Posted March 25, 2013 New Toy. Tokyo Marui M14 Socom Externals: G&P EBR chassis Magpul MIAD Magpul CTR Magpul XTM Hand Stop kit Random AAC flash hider (not going to be on there for long, swapping out for PTS AAC) Custome AOR2 Desert Khaki Krylon AOR1 duracoat dip paint Internals: Still in progress Quote Link to post Share on other sites
PianoBlack Posted March 26, 2013 Report Share Posted March 26, 2013 Nice Comic Sans EBR! -Piano Quote Link to post Share on other sites
Failcat Posted March 26, 2013 Report Share Posted March 26, 2013 Nice Comic Sans EBR! -Piano LOL I know, I almost died when I saw the font. Quote Link to post Share on other sites
PianoBlack Posted March 26, 2013 Report Share Posted March 26, 2013 Believe it or not, the real EBRs have that same font and G&P copied that detail. I had the same reaction when I saw mine. -Piano Quote Link to post Share on other sites
Horsem4n Posted March 26, 2013 Report Share Posted March 26, 2013 really? sage uses comic sans on their chassis? i wonder if no one there has any knowledge on typography or if their typography guy has a real sick sense of humor, lol. Quote Link to post Share on other sites
hawaiianjuggernaut Posted March 26, 2013 Report Share Posted March 26, 2013 Went to the field today. Some ref has a TM m14 gearbox dropped into a realsteel Sage EBR chassis. Sooooo seeeexxxyyy. Quote Link to post Share on other sites
Failcat Posted March 26, 2013 Report Share Posted March 26, 2013 Went to the field today. Some ref has a TM m14 gearbox dropped into a realsteel Sage EBR chassis. Sooooo seeeexxxyyy. ...wut... That's awesome, but I'd love to know how he pulled it off lol. You already need a different motor cage for the G&P kit, so I can only imagine what else you'd have to do to drop it in to a real Sage. Quote Link to post Share on other sites
hawaiianjuggernaut Posted March 29, 2013 Report Share Posted March 29, 2013 He said total setup was 3 grand + easy. Not exactly sure how he did it. -Hawaiian Quote Link to post Share on other sites
Paul202 Posted March 30, 2013 Report Share Posted March 30, 2013 Dang, $3000. I've wanted to buy the WE M14 EBR forso long but haven't because I considers it too expensive at $600. Quote Link to post Share on other sites
hawaiianjuggernaut Posted March 30, 2013 Report Share Posted March 30, 2013 Guy here locally has a RATECH level 2 EBR with 4 mags and a hard case for 850.... SOooooo tempted. ahaha. Quote Link to post Share on other sites
Failcat Posted March 30, 2013 Report Share Posted March 30, 2013 I picked up my EBR originally (TM M14, G&P EBR kit, Guarder FTK, Magpul MIAD, MOE stock, 5 mags) for $350 locally. I think I made out pretty well, haha. Quote Link to post Share on other sites
bradnuts Posted March 31, 2013 Report Share Posted March 31, 2013 (edited) Got my Mega monolithic upper back. It used to be on my PTW, and I decided it was time to make it work on my WE M4. WE Noveske MEGA Monolithic *denotes real steel parts Upper, lower finished in cerakote tungsten grey Prime Noveske gen2 lower *Mega Arms Monolithic rifle length tubular upper *BCM gunfighter grip *Vltor iMod *buffer tube *forward assist *mag release with Seekins button *ejection port cover *Magpul/Noveske 60 degree throw ambi safety *Magpul ASAP *Magpul RSA *Larue lo pro gasblock *BCM mod4 Charging handle *KAC Micro front and 600 meter rear sights Element SF M600 light *Gear Sector surefire scout offset mout Angry Gun steel 14.5 inch barrel G&P DBAL *Trijicon Accupoint TR24G *ADM scout mount FCC large takedown and pivot pins (cerakote graphite black) TSC Anti-ratation pins (cerakote graphite black) Surefire style MB556k Edited March 31, 2013 by bradnuts Quote Link to post Share on other sites
cavapanther Posted March 31, 2013 Report Share Posted March 31, 2013 That's one sweet MEGA you got there Didn't know WE M4 is 1:1 to scale, what about other WE rifles, SCAR, G36 and M14 etc? I'm seriously considering to get a WE M14 if it's true 1:1 scale and I will probably get one with a real deal sage EBR or Troy MCS Chassis. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.