hwagan Posted August 24, 2013 Report Share Posted August 24, 2013 Last time I tried to get in here with an AEG that might have just about barely touched $1k if you counted every single tiny part at it's most expensive price... Finally, legitimate entry! 1 Quote Link to post Share on other sites
Bando Posted August 24, 2013 Report Share Posted August 24, 2013 can you get the SR3 in the uk yet? Quote Link to post Share on other sites
Lone_Bullet Posted August 24, 2013 Report Share Posted August 24, 2013 Hwagan, you mind posting what made that AEG go over 1k? Quote Link to post Share on other sites
hwagan Posted August 24, 2013 Report Share Posted August 24, 2013 (edited) Hwagan, you mind posting what made that AEG go over 1k? Look at the bolt It's a G&P/Bomber (From what I can find out, G&P guts in Prime externals, although that's unconfirmed) MRP WA System GBBR; The gun itself goes on Ehobby for $900, and the Strike Systems dot sight, mount, ASAP, Ergo grip and BUIS bring it up to around $1070 or so. A functioning mag (because G&P STANAGS are non-starters) is another $50 odd on top for the G&P Pmag. Edited August 24, 2013 by hwagan Quote Link to post Share on other sites
notrabies Posted August 24, 2013 Report Share Posted August 24, 2013 can you get the SR3 in the uk yet? Email the guys at Atacka here: http://www.custom-airsoft-guns.com/contacts/ They're based in the US, but they do a lot of exporting from my understanding. Quote Link to post Share on other sites
-wigs- Posted August 25, 2013 Report Share Posted August 25, 2013 Hit the 1k mark the first month I had my lm4. Just over looked this thread for over a yr. 1 Quote Link to post Share on other sites
Gigueand Posted August 29, 2013 Report Share Posted August 29, 2013 TSI Micro Galil with a P* engine. That has to be one of the most rare rifles I've seen in recent years, plus the fusion engine makes it a work of art. Quote Link to post Share on other sites
seagullman Posted August 29, 2013 Report Share Posted August 29, 2013 TSI Micro Galil with a P* engine. real nice.. guess you gave up on the dg conversion huh Quote Link to post Share on other sites
double_a Posted August 29, 2013 Report Share Posted August 29, 2013 I put Tony through one Galil conversion already, I couldn't do it to him again. Not totally thrilled with the P* but it's better than a gearbox. Quote Link to post Share on other sites
kylec Posted August 31, 2013 Report Share Posted August 31, 2013 (edited) Systema PTW M4 FCC MOE Grip PTS Blackout 51T, PMAGs Magpul Handstop, MOE Triggerguard, RSA, MS3 Sling Daniel Defense MK18 RIS II, MK12 gas block RS Milspec gas tube, misc. springs Troy Ind. Front/Rear M4 Folding Tritium Battlesights, Ambi mag release, Receiver sling adapter BCMGUNFIGHTER Charging Handle Laser Devices Inc DBAL-I2 Trijicon ACOG ECOS Edited August 31, 2013 by kylec Quote Link to post Share on other sites
icolater Posted September 23, 2013 Report Share Posted September 23, 2013 (edited) Airsoft Surgeon P226 Elite Stainless Edited September 23, 2013 by icolater Quote Link to post Share on other sites
muffe66 Posted October 28, 2022 Report Share Posted October 28, 2022 From the top left: VFC HK 417 16" with g28 rail and stock. Zparts built VFC HK 416D, the only vfc things left: valveknocker assembly, pistolgrip, stock and magazines. VFC 416A5 Forged edition. GHK Sig 551 Wingun revolver, NE Uzi KSC MK23 gbb, 20-ish years old. VFC Walther PPQ Tokyo Marui Sig Sauer p226 VFC HK VP9 tactical VFC HK USP 9mm Hephaestus/GHK AMD-65 VFC HK G3 VFC G36K with Hensoldt dual optic carryhandle. VFC Scar-H VFC M4A1 WE Beretta 92fs, Custom engraved KWA Kriss Vector. I also have a MP5 & MP7 incoming ❤️ Quote Link to post Share on other sites
BigAl Posted October 30, 2022 Report Share Posted October 30, 2022 muffe66 most of them are well under $1K, hell of a collection though. Quote Link to post Share on other sites
muffe66 Posted October 30, 2022 Report Share Posted October 30, 2022 (edited) 21 hours ago, BigAl said: muffe66 most of them are well under $1K, hell of a collection though. not really 😅 VFC HK 417 16" with g28 rail and stock. , this was over 1000$ with all parts Zparts built VFC HK 416D. costed a slight bit over 1300$ to build. precision barrel, zparts steel bolt, crusader 2 stage trigger, snappy-boi buffer spring, Real H1 buffer. VFC 416A5 Forged edition. basegun costed 1009$, it has G&P Dbal-A2 an a Real Exps3-2, precision barrel and also a zparts steel bolt. precision barrel, snappy-boi buffer spring GHK Sig 551 cost to build this like it is built is over 1000$, only the ACR Stock adapter was 170$ it begun its life like a 553 rifle. Hephaestus/GHK AMD-65 valued at 1200$, RS handguard RS stock, RS, gastube, RS pistolgrips, steel barrel, steel internals, steel bolt, DH modded mags. precision barrel & TNT hopup unit. VFC HK G3 with upgrades it also went a bit over 1000$, fully upgraded internally. VFC Scar-H, with attachments and those 3 extra mags we´re over 1000$ on this too. without mags were slightly over 900$, if i buy a light and frontgrip, (which i plan too) we´ll pass the 1000$ mark. VFC G36K with RS Hensoldt dual optic carryhandle. also costed a bit over 1000$ in total with sight, steel barrel, steel bolt and steel hammer. precision barrel KWA Kriss Vector. with 5 mags and 3 short mags it´s valued to over 1000$, zparts barrel, zparts rails, hep recoil kit, precision barrel, another charging handle, ratech hopup unit. (and then im not counting in shipping and custom-fees in this.) Edited October 30, 2022 by muffe66 Quote Link to post Share on other sites
PureSilver Posted October 31, 2022 Report Share Posted October 31, 2022 Oof, I didn't know this thread existed. Everyone glance at the absolute catastrophe that is my purchasing decisions. First up: Inokatsu P226R. P226-02 upgrade kit, with steel trigger, hammer, magazine release, magazine release cover, and unique takedown lever (omitting the unrealistic push-to-safe feature Japanese law forces on TM models). Guarder steel decocking lever, slide release and guide rod, 150% recoil spring, piston and nozzle assembly. Nine Ball hop-up rubber, piston head and 6.03x97mm stainless steel inner barrel. Prime steel faux firing pin. Genuine SIG Sauer mainspring seat and Hogue Extreme Series aluminium grips. I spent somewhere about $1,800 on this pistol. If you have ever loved me, please do not ask what I sold it for. 3 Quote Link to post Share on other sites
PureSilver Posted October 31, 2022 Report Share Posted October 31, 2022 Second: GHK AUG A2 (OD). Hephaestus 16" steel outer barrel, cut down to the front of the gas block and threaded 14mm CCW and steel valve knocker. Best Gun steel A1 18" barrel extension and flash hider. Hexagon Production steel HBAR 20" barrel extension, bipod and flash hider. Rethreaded 14mm CCW. GHK steel gas block, CO2 magazine outlet valves (x6) for DevilHunter conversion, A3 rail. DevilHunter aluminium magazine feed lips (x6). Maple Leaf bucking, nub and stainless steel inner barrel. GBL Black Widow hop-up chamber. FG Airsoft adjustable nozzle and A2 rail. I haven't added the price of this up but to put it into context, the magazines from GHK are about $60, the outlet valves are $20 and the DevilHunter feed lips are about $20. Each. 3 Quote Link to post Share on other sites
PureSilver Posted October 31, 2022 Report Share Posted October 31, 2022 Third: KSC Mk.23 SOCOM System 7. Mafioso Airsoft steel slide and outer barrel. Volante Airsoft ‘Aurora’ high-volume BBU with CNC. This has a steel housing and aluminium nozzle, both CNC-milled. RA Tech 150% recoil spring. G&P welded steel KAC OHWS suppressor with full trademarks, rethreaded 14mm CCW. Custom-made Mk.23 MIL-SPEC-1913/’Picatinny’ rail adaptor, CNC-milled from billet aluminium. Fits over the nonstandard HK rail and screws into the front of the trigger guard. Clone SureFire X300V. This was actually not as horrifically expensive as other steel pistols I've owned, but it was still substantially more than $1,200. Sold for about a 50% loss. 3 Quote Link to post Share on other sites
PureSilver Posted October 31, 2022 Report Share Posted October 31, 2022 Fourth: TM Glock 34. Guarder steel slide and outer barrel, sights, guide rod, 150% recoil spring, magazine release, stainless steel inner barrel and Complete New Generation frame with PTW362 serial number plate. Guns Modify steel hop-up unit. Maple Leaf hop-up rubber. Volante Airsoft Stratos telescopic BBU. The release of Guarder's New Generation frames somewhat reduces the price (and massively reduces the annoyance) of building a full Guarder Glock. I bought the gun used with an old-style full Guarder lower, which reduced the price I paid quite a lot, but this is still comfortably in excess of $1,000. 2 Quote Link to post Share on other sites
PureSilver Posted October 31, 2022 Report Share Posted October 31, 2022 Fifth: TM P226 E2. PGC P226 frame, slide and grip inserts. Prime 14mm CCW threaded outer barrel and faux firing pin. Guarder steel spring guide, 150% recoil spring, steel sights, takedown lever, trigger, magazine release, decocker, slide catch and grip screws. Hogue Overmould grips. UAC lightweight BBU. SureFire Nitrolon P114-C with MR04 rail adapter. Lumens Factory P60 drop-in. @blobface MR04 adapter for PGC trigger guard. Madbull Gemtech Trinity. This thing is smoother than buttered Casanova on ice, and I haven't sold it even though I only buy steel pistols these days. 3 Quote Link to post Share on other sites
PureSilver Posted October 31, 2022 Report Share Posted October 31, 2022 Sixth: Mafioso Kimber TLE II. CowCow RM1 adjustable recoil guide. VFC VLight with custom Mafioso slide catch. Maple Leaf hop-up rubber and stainless steel inner barrel. The pistol alone was $1,300ish. I'll be working on a better LED upgrade for the utterly pants VFC TIR lens and LED. 3 Quote Link to post Share on other sites
Lax Posted January 3, 2023 Report Share Posted January 3, 2023 Hesitating to sell my last ones... Still super costly with upgrades so again appearing in this club Quote Link to post Share on other sites
Gunnman Posted November 15, 2023 Report Share Posted November 15, 2023 (edited) Asahi WA2000 DX in mint condition and 3 Mags. Also, a real WA2000-spec accurate Schmidt & Bender 56mm scope. I plan to have a mount replicated like the real one for use of the scope similar to the mount in the picture Edited November 15, 2023 by Gunnman 2 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.