bigtony Posted December 23, 2008 Report Share Posted December 23, 2008 I tested it outside ( 6°C ), works well and the bolt stopped when the mag was empty. I also got some good trajectory and it seems my M4 does have a softer hop up rubber made for lower fps settings ( my version shoots at 350fps or something similar ). I tested it with excell 0.23g and the bbs are falling at 30m, with more hop up this thing would have a range similar to a good aeg. But the hop up ajustment ring is still difficult to turn so I can't have a perfect trajectory. Among my 4 magazines only one does have a problem, the bolt stop feature doesn't work on it, and it also leaks a little bit. But I have absolutely no problem with the 3 other mags. @ Kai_Wolf : you will get the steel bolt catch, no doubt about it. where did you order yours from? does it have steel bolt catch? Quote Link to post Share on other sites
OKane22 Posted December 23, 2008 Report Share Posted December 23, 2008 (edited) this would be my first gas gun so can someone answer this rather stupid question, how many shots can you do from one full gas charge? or do you have to cary around a gas can and load that and bbs every clip, assuming you only have the standard 1 mag edit - also does anyone have some ideas on how the accuracy is? Edited December 23, 2008 by OKane22 Quote Link to post Share on other sites
slu Posted December 23, 2008 Report Share Posted December 23, 2008 (edited) this would be my first gas gun so can someone answer this rather stupid question, how many shots can you do from one full gas charge? or do you have to cary around a gas can and load that and bbs every clip, assuming you only have the standard 1 mag edit - also does anyone have some ideas on how the accuracy is? From what has been reported here, assuming a nonleaky magazine in fair temperature (say, above 15 degrees Celsius), a full charge of green gas in a magazine can go through ~60 shots. The magazine can only hold 30 BBs at a time, so there is no doubt that this is definitely more spendy in the long run than an AEG. Edited December 23, 2008 by slu Quote Link to post Share on other sites
OKane22 Posted December 23, 2008 Report Share Posted December 23, 2008 and with say top gas it would still be approximately 60 shots? meaning the top gas just shoots harder not last longer? Quote Link to post Share on other sites
yanng Posted December 23, 2008 Report Share Posted December 23, 2008 (edited) I ordered mine at wgc ( afc version ) and it has the steel bolt catch. I tested it with a magnet : http://picasaweb.google.fr/yanngx/WeAfcM4a1# . @OKane22 : green gas shoots harder ( this gun needs it, the bolt assembly weights 250g and look how far it travels ! ) and doesn't cools down as fast as other gasses so you will get your 60 shots but the temperature is also a major factor ( no problem on semi at 6°C but 20°C are needed for extended burst with a great rof ). I encountered the firing pin issue and I found out that the gun needs to be cocked before inserting the magazine and cocked again if you want to chamber a bb, after doing this I never encountered the piring pin issue again but I always get it if the gun isn't cocked before. It is also easier to insert the magazine. It's quiet similar to the we luger on this point expect that on the luger you can't even insert the mag. I hope this helps. I tested the accuracy and at 30m it is very similar to a standart aeg m4 but my hop up setting isn't perfect, I would say it is skirmishable but it will be quiet hardcore ( my fps limit is at 350fps ). It is a great gun but only for someone who already owns a great and reliable aeg. Edited December 24, 2008 by yanng Quote Link to post Share on other sites
TwinTurboCH Posted December 24, 2008 Report Share Posted December 24, 2008 Just been looking around the sites that sell it, am I right in thinking that you can't actually get the high power version anymore? Everywhere only seems to sell the 350fps version. Looks like they've listened to how much power people need to actually be able to skirmish with it. Quote Link to post Share on other sites
Horsem4n Posted December 24, 2008 Report Share Posted December 24, 2008 um, airsoftbuddy.com... Quote Link to post Share on other sites
0nslaught Posted December 24, 2008 Report Share Posted December 24, 2008 um, airsoftbuddy.com... Is there a WE M4 that is the hi power one and has trademarks? Quote Link to post Share on other sites
hazmatt Posted December 24, 2008 Report Share Posted December 24, 2008 Is there a WE M4 that is the hi power one and has trademarks? Airsoftbuddy.com has both the non trade and full trade for the same price, both of which are the original high power (500fps+). I can attest to their great customer service as well. Quote Link to post Share on other sites
uscmCorps Posted December 24, 2008 Report Share Posted December 24, 2008 According to airsoft-news.eu: Start to deliver to SOCOMGEAR dealers worldwide. Please contact your local dealers to pre-order. MSRP: $399 includes Noveske licensed KX3 with the rifle. Extra magazine: $40 Rails and sights are optional. NOTE: Not available in USA. Waiting for importing confirmation from government. An extra $59 for Noveske Markings and KX3? Not bad. They do mention that the Noveske Rails are an extra expense. Quote Link to post Share on other sites
Matt0311 Posted December 24, 2008 Report Share Posted December 24, 2008 The AFC version on WGCshop is the WE M4, just with a different reciever? Thanks, Matt Quote Link to post Share on other sites
0nslaught Posted December 24, 2008 Report Share Posted December 24, 2008 Airsoftbuddy.com has both the non trade and full trade for the same price, both of which are the original high power (500fps+). I can attest to their great customer service as well. Right, but they both have different fps ratings? Standard: Muzzle Velocity: 480fps with 0.2g BBs & Top gas AFC Version: Muzzle Velocity: 330-350 FPS ( with 0.2g BBs & Top gas ) am i missing something here Quote Link to post Share on other sites
TwinTurboCH Posted December 24, 2008 Report Share Posted December 24, 2008 (edited) um, airsoftbuddy.com... yes, and mr airsoftbuddy says that the 'standard' version i.e. high power is not being made anymore, only the AFC version, which is de-tuned to give only 350fps. I hate the way people on here are so condescending LOL Edited December 24, 2008 by TwinTurboCH Quote Link to post Share on other sites
Horsem4n Posted December 24, 2008 Report Share Posted December 24, 2008 (edited) they do say its the lower power version, but it could be either the white power down plug like thing or a different valve all together... oh, and Turbo, the regular version isnt out of stock yet. Edited December 24, 2008 by Horsem4n Quote Link to post Share on other sites
chris u'5 Posted December 24, 2008 Report Share Posted December 24, 2008 (edited) I've been eagerly following both this and the WA M4 thread and I'm genuinely excited about this new innovation. I know this may be a difficult question to answer but is the general opinion that WE have outgunned WA with their version of the M4 GBB (especially considering WEs new version) I'm very keen to buy one of these but I'm still slightly unsure, I guess I'm a bit of a snob with GBB pistols and would never consider buying a WE pistol over a WA but it seems they have really improved their game with this new offering, is that fair to say? I'd also love to see some more pics of what people have done with their WE M4s. Thanks guys. Edited December 24, 2008 by chris u'5 Quote Link to post Share on other sites
Horsem4n Posted December 24, 2008 Report Share Posted December 24, 2008 well, i read from beginning to end and all the people that own both guns have said that the WE is better. its built to GG specs and is based on classic designs instead of a new design. there's no mag output issues or feed jamming (ra-tech did just make a ramp like part for the WA than helps against it but i haven seen it in action). the body is a HQ aluminum (with the rest of it steel and ABS) and now comes with colt trades and is all around cheaper. durable mags to boot. oh, and the best thing... its not a WE gun. designed by another company. i even have my speculations that its not even manufactured by WE, just distributed by them. Quote Link to post Share on other sites
Kai_Wolf Posted December 24, 2008 Report Share Posted December 24, 2008 I asked this on another site, but I was wondering for those who have had installed a RIS or RAS on their WE already. I was considering getting the RIS from ebay, the KAC, but to make it not wobble, I would need something like the Madbul Ras fix. Ive noticed on the gas gun forums that people have had other rail systems installed, such as some of the DD and Larue replicas ive seen on EB. Has anyone installed a rail system on their WE and had it been a drop in fit with no wobble at all? If so, what kind was it? I am specifically looking at the new CNC EB Daniel Defense rail, but I cant tell if it will accomodate the gas tube. Quote Link to post Share on other sites
Carsten Posted December 24, 2008 Report Share Posted December 24, 2008 why should any rail system whobble? Quote Link to post Share on other sites
Horsem4n Posted December 24, 2008 Report Share Posted December 24, 2008 well, i think it was Lupas that grabbed a cheap larue copy of ebay and it fit without wobble. the ras fix is to make a tm style receiver into a mil spec receiver. since the WE is already mil spec you can put on all that sweet madbull and G&P stuff off the bat. compatibility with that EBB copy stuff is unknown, but the grip replacements (the drop in ones) will work with a couple files here and there. Quote Link to post Share on other sites
Kai_Wolf Posted December 24, 2008 Report Share Posted December 24, 2008 From what I remember, Lupus actually bought the cheaper KAC replica on ebay, and not the Larue. That is the one that wobbles a bit and I wanted to save the money and not have to buy the RAS fix from madbull. A couple of people on the other forums said that theirs fit drop in, but I didnt know if it wobbled or not. Quote Link to post Share on other sites
Horsem4n Posted December 24, 2008 Report Share Posted December 24, 2008 oh yeah, KAC... but yeah, anything that is a straight swap for the hand guards or is for RS threaded receivers (like G&P and some madbull parts i think) will work. Quote Link to post Share on other sites
TwinTurboCH Posted December 24, 2008 Report Share Posted December 24, 2008 oh, and Turbo, the regular version isnt out of stock yet. with who? Airsoftbuddy told me he had no more 'standard' versions left even though his site says otherwise Quote Link to post Share on other sites
Horsem4n Posted December 24, 2008 Report Share Posted December 24, 2008 ok, then never mind. Quote Link to post Share on other sites
PaulB Posted December 24, 2008 Report Share Posted December 24, 2008 with who? Airsoftbuddy told me he had no more 'standard' versions left even though his site says otherwise Why the importance of having the standard one? It has no markings and the FPS is way too high. Quote Link to post Share on other sites
TwinTurboCH Posted December 24, 2008 Report Share Posted December 24, 2008 Why the importance of having the standard one? It has no markings and the FPS is way too high. It was going to be for a semi-automatic SPR type setup, that was all. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.