Hoot Posted March 7, 2009 Report Share Posted March 7, 2009 Yeah okay, I found in one of WETTIs previous posts about their Custom AFC version that shoots 330-350 only sold from them. That sounds like my reliable bet, now just waiting for the CO2 and I'll be good. @WETTI: Where will be able to purchase T.S. Custom items from? And any news on a steel charging handle? Quote Link to post Share on other sites
renegadecow Posted March 7, 2009 Report Share Posted March 7, 2009 The WE is meant for propane or higher so using 134A/Duster will not work. Actually, mine works fine on the stuff (27°C) and fully cycles to work the bolt stop. Others here have also reported same. Its just that 134a is relatively more expensive so I'd rather modify the gun to shoot lower on cheaper green gas. Quote Link to post Share on other sites
4boost Posted March 7, 2009 Report Share Posted March 7, 2009 done that No obvious damage etc It's leaking right out of the top of the mag as if it's going straight through the whole mag while filling . I've left the strike valve assembly in silicone for the night There is a metal plug under the gas port/feed lip. Mine was leaking there until I hammered the plug flush with the surface. It's in the wiki. Quote Link to post Share on other sites
Horsem4n Posted March 7, 2009 Report Share Posted March 7, 2009 Last piece of news today: Our brand new, strengthened (material-wise) AWSS M4 charging handle will be released within a week. Yeah okay, I found in one of WETTIs previous posts about their Custom AFC version that shoots 330-350 only sold from them. That sounds like my reliable bet, now just waiting for the CO2 and I'll be good. @WETTI: Where will be able to purchase T.S. Custom items from? And any news on a steel charging handle? they posted that on the last page, you decide what it means. Quote Link to post Share on other sites
WETTI Posted March 7, 2009 Report Share Posted March 7, 2009 any chance you will sell your rifles with these receivers allready installed? NO, WETTI will not do that. These are all after-market parts produced by other manufacturers. Quote Link to post Share on other sites
WETTI Posted March 7, 2009 Report Share Posted March 7, 2009 Yeah okay, I found in one of WETTIs previous posts about their Custom AFC version that shoots 330-350 only sold from them. That sounds like my reliable bet, now just waiting for the CO2 and I'll be good. @WETTI: Where will be able to purchase T.S. Custom items from? And any news on a steel charging handle? I believe T.S. Custom will be ready for business by no later then Monday (Mar.09). I'll post their link here for all to see then. We are not making any steel charging handles, but our new, strengthened charging handle will be released as soon as next week. Quote Link to post Share on other sites
Lupus78 Posted March 7, 2009 Author Report Share Posted March 7, 2009 Yeah okay, I found in one of WETTIs previous posts about their Custom AFC version that shoots 330-350 only sold from them. That sounds like my reliable bet, now just waiting for the CO2 and I'll be good. What we've been told, the prototype CO2 magazine and the AFC custom version (330-350) together shooted around 380fps, if I remember correctly (and the ~480 model shoots way over 500). So unless they change the setting in integral regulator before they release the actual production version, that's what we'll get. WETTI: All these news sound really exciting! I'm personally very eager to have a CNC body, strengthened charging handle, new hopup with the chrome plated barrel, lower fps bolt sets, CO2 magazine, higher kick buffers... Sooooooooo many nice new things to upgrade my baby, that I can't wait! Quote Link to post Share on other sites
Eliminator Posted March 7, 2009 Report Share Posted March 7, 2009 That's gonna be sooo cool! A nice body with(why not?)Bushmaster markings!And why not personalisable serial number? All these new parts make that gun every month more attractive! Quote Link to post Share on other sites
Mikhailthejackal Posted March 7, 2009 Report Share Posted March 7, 2009 Awesome news Wetti, cant wait for the power sets. Now though, my cocking handle has just snapped, And i need a replacement sharpish. Does anyone know of a retailer (preferably in the uk) that sells them? Im trying to avoid airsoftbuddy if i can, what with his recent problems and needing it by the 20th.. Quote Link to post Share on other sites
PaulB Posted March 7, 2009 Report Share Posted March 7, 2009 Awesome news Wetti, cant wait for the power sets. Now though, my cocking handle has just snapped, And i need a replacement sharpish. Does anyone know of a retailer (preferably in the uk) that sells them? Im trying to avoid airsoftbuddy if i can, what with his recent problems and needing it by the 20th.. tacticalquartermaster.co.uk Quote Link to post Share on other sites
WETTI Posted March 7, 2009 Report Share Posted March 7, 2009 tacticalquartermaster.co.uk TQM is now an authorized "WE Sales/Parts/Service Center"; their first order of parts & accessories will be shipped within the next two week. WETTI Quote Link to post Share on other sites
chris u'5 Posted March 7, 2009 Report Share Posted March 7, 2009 Brilliant. I see they have had parts listed for a while now but no stock. That's great news for the UK based owners. Quote Link to post Share on other sites
slu Posted March 7, 2009 Report Share Posted March 7, 2009 TQM is now an authorized "WE Sales/Parts/Service Center"; their first order of parts & accessories will be shipped within the next two week. WETTI I apologize if this has already been said, but are there any such places in the US? Has the customs/BATF issue been sorted out? Quote Link to post Share on other sites
chris u'5 Posted March 7, 2009 Report Share Posted March 7, 2009 Hey WETTI, It's a long shot but have you heard about anyone who is planing to produce a replica Daniel Defense barrel nut which will allow us to use the replica DD Mk.18 rail easily on our rifles. I know of a lot of people who would love it if you said yes A RS DD barrel nut allows you to do this but it is only available to our American brothers (DD will not ship outside the US) Many thanks, Chris Quote Link to post Share on other sites
WETTI Posted March 7, 2009 Report Share Posted March 7, 2009 I apologize if this has already been said, but are there any such places in the US? Has the customs/BATF issue been sorted out? Yes, we're working on it... I'll have a list for you guys very soon. Quote Link to post Share on other sites
WETTI Posted March 7, 2009 Report Share Posted March 7, 2009 Hey WETTI, It's a long shot but have you heard about anyone who is planing to produce a replica Daniel Defense barrel nut which will allow us to use the replica DD Mk.18 rail easily on our rifles. I know of a lot of people who would love it if you said yes A RS DD barrel nut allows you to do this but it is only available to our American brothers (DD will not ship outside the US) Many thanks, Chris Alright, Chris, I'll make a note & talk to the 'after-market' boys about it.... no promises though, but I'll ask. Quote Link to post Share on other sites
Eliminator Posted March 7, 2009 Report Share Posted March 7, 2009 (edited) Hey guys all products of TS Customs will be released trough AB(I'm proud to be the first to know it...in fact, I just asked William if I would be a retailer and then he told me that!) Do not mistakes guys! I don't work for AB!There will be more news on next week Edited March 7, 2009 by Eliminator Quote Link to post Share on other sites
chris u'5 Posted March 7, 2009 Report Share Posted March 7, 2009 (edited) Alright, Chris, I'll make a note & talk to the 'after-market' boys about it.... no promises though, but I'll ask. What more can I ask mate What with the DD Mk.18 rail being issued as part of the SOPMOD Block 2 kit the DD rail is and will become very popular with airsofters so I think a replica DD Mk.18 barrel nut would become a great seller. The issue with the barrel nut and the replica rail is discussed regularly on many of the forums I visit and is a genuine concern with many people in the various communities. Thank you for taking note of my query WETTI, I really appreciate it. Edited March 7, 2009 by chris u'5 Quote Link to post Share on other sites
Airsoft Buddy Posted March 7, 2009 Report Share Posted March 7, 2009 Hey WETTI, It's a long shot but have you heard about anyone who is planing to produce a replica Daniel Defense barrel nut which will allow us to use the replica DD Mk.18 rail easily on our rifles. I know of a lot of people who would love it if you said yes A RS DD barrel nut allows you to do this but it is only available to our American brothers (DD will not ship outside the US) Many thanks, Chris As I know all china made DD Mk18 is comes with the barrel nut. My WE GBB M4 also installed the china made Mk18. The barrel just need a bit modify, then can fit for your WE M4. Just need to cut short around 2mm, then it can fit. But the outer barrel of the WE M4 also need to rip off around 1mm at the bottom. Otherwise, the barrel nut can't fully go though the outer barrel. Quote Link to post Share on other sites
WETTI Posted March 7, 2009 Report Share Posted March 7, 2009 Hey guys all products of TS Customs will be released trough AB(I'm proud to be the first to know it...in fact, I just asked William if I would be a retailer and then he told me that!) Do not mistakes guys! I don't work for AB!There will be more news on next week Correction: All T.S. Custom products will be released through a new site called T.S. One (http://www.wix.com/ts1airsoft/TS-One). I believe they'll be operational starting next Monday (Mar. 09). Wholesale inquiries can also be made through T.S. One on all T.S. Custom & LAT products (another after-market parts manufacturer) Quote Link to post Share on other sites
Airsoft Buddy Posted March 7, 2009 Report Share Posted March 7, 2009 Correction: All T.S. Custom products will be released through a new site called T.S. One (http://www.wix.com/ts1airsoft/TS-One). I believe they'll be operational starting next Monday (Mar. 09). Wholesale inquiries can also be made through T.S. One on all T.S. Custom & LAT products (another after-market parts manufacturer) WETTI is correct. AB just a reseller. Quote Link to post Share on other sites
Cobbcore11 Posted March 7, 2009 Report Share Posted March 7, 2009 Any idea when the new hop-up design and barrel will be released? I can't wait to pick a couple up Quote Link to post Share on other sites
Eliminator Posted March 7, 2009 Report Share Posted March 7, 2009 Correction: All T.S. Custom products will be released through a new site called T.S. One (http://www.wix.com/ts1airsoft/TS-One). I believe they'll be operational starting next Monday (Mar. 09). Wholesale inquiries can also be made through T.S. One on all T.S. Custom & LAT products (another after-market parts manufacturer) Lol! That's what I'd mean!but sometimes the right words escape me... Quote Link to post Share on other sites
devilstar2k2 Posted March 7, 2009 Report Share Posted March 7, 2009 I managed to save my barrel... Kind of... I had to dremel off all of the threads, and JB Weld it back together. Seems strong enough for now until I find a replacement. Flash hider is still all chewed up though, I just could not get the darned thing off. Anyway, here's what I got for now. Oh, and a couple of pics of its little buddy. I went with the non-trade versions of both. Quote Link to post Share on other sites
Hoot Posted March 8, 2009 Report Share Posted March 8, 2009 (edited) @WETTI: Using .20s on the AFC with CO2 mag? I need it hitting below 370 on .25s Thanks, TS Custom sounds great! Edited March 8, 2009 by Hoot Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.