Eliminator Posted April 5, 2009 Report Share Posted April 5, 2009 Wetti do you have any details about the new bodies? Quote Link to post Share on other sites
WETTI Posted April 5, 2009 Report Share Posted April 5, 2009 Wetti do you have any details about the new bodies? Â I will in a few days Quote Link to post Share on other sites
HSOJGNILRAD Posted April 5, 2009 Report Share Posted April 5, 2009 Guys the real concern is the new barrel and bucking nub that was said to released "REAL SOON"...........Well it still is not available. I have resorted back to my AEG because I couldn't hit the ground if I aimed at it with my WE. There is all this concern with MB and DD barrel nuts and so on......limited edition AB WE M4's. Guys I'm all so sorry for the floating valves in stainless steal I have promised. The guy that has made them is NOW unable to be reached. He has them finished and is siting on something he can not use so I'm aggravated. I've broken every brass floating valve I have received and I'm not going to spend $20 shipping for a $20 part. TS one having problems. How do I get a steel valve assembly and a New barrel for a reasonable price. Is horizon selling steel valve assemblies yet or can Jeff hook up on the new barrels? Quote Link to post Share on other sites
IBICO Posted April 5, 2009 Report Share Posted April 5, 2009 FINALLY.. Used all day on this.. *phew* Â Hope this help a bit. I also added missing text and #part numbers from the original poster. Used the list from AB`s site. Â http://www.gasguns.info/forum/viewtopic.php?f=7&t=387 Quote Link to post Share on other sites
chris u'5 Posted April 5, 2009 Report Share Posted April 5, 2009 Good work IBICO! This will prove to be very useful. You're a dedicated man Quote Link to post Share on other sites
rottenotto Posted April 5, 2009 Report Share Posted April 5, 2009 Guys the real concern is the new barrel and bucking nub that was said to released "REAL SOON"...........Well it still is not available. I have resorted back to my AEG because I couldn't hit the ground if I aimed at it with my WE. Â LMAO! I know how you feel. My WE is the same way. Â Meanwhile my AEG's can hit a sparrows head at 150 feet - over and over again. Â Â Â Â Quote Link to post Share on other sites
HSOJGNILRAD Posted April 6, 2009 Report Share Posted April 6, 2009 LMAO! I know how you feel. My WE is the same way. Â Meanwhile my AEG's can hit a sparrows head at 150 feet - over and over again. Damn or could someone even tell us how it shoots with the new barrel! Guys like me and Rotten would like to know if the barrel is even making a difference.......I love this gun I just want it to shoot strait. Quote Link to post Share on other sites
Net Ronin Posted April 6, 2009 Report Share Posted April 6, 2009 Take a look what hot weather in my country could do the WE mag. I live in Thailand. It is veryyyyyyyy hot now. I use R22 with my gas guns (pistols and one M4). I may need to switch to lower pressure gas for WE during summer. This mag had been leaked (I have four. All were leaked. All other there have been fixed and worked great) , so I asked my friend to fix it for me. This one he did not put MAG's cover on . He just wanted to check if it could hold the pressure and then "BANG". One piece hit a light bulb and darkened the room. Luckily, it did not hit my friend (he left it and went to the rest room). Although it was the first time for us that R22 could do something like this, I don't think this is a mistake from WE. Weather in my country causes lots of problems with gas gun. Â Â Â Â Â Â Quote Link to post Share on other sites
renegadecow Posted April 6, 2009 Report Share Posted April 6, 2009 (edited) Thats really strange seeing as R22 has similar vapor pressure to propane. Of course there's temperature; leave it under the sun and go over 40°C without the cover is asking for trouble as that will peak to well over 200psi. But still, you should stop using that as it eats ozone like a sugar-deprived child with a bag of oreos. And don't use them without the covers because it adds structural support.  edit: VVV hfc134a=duster gas r22~similar to but not the same as green gas/propane Edited April 6, 2009 by renegadecow Quote Link to post Share on other sites
4boost Posted April 6, 2009 Report Share Posted April 6, 2009 Take a look what hot weather in my country could do the WE mag. I live in Thailand. It is veryyyyyyyy hot now. I use R22 with my gas guns (pistols and one M4). I may need to switch to lower pressure gas for WE during summer. This mag had been leaked (I have four. All were leaked. All other there have been fixed and worked great) , so I asked my friend to fix it for me. This one he did not put MAG's cover on . He just wanted to check if it could hold the pressure and then "BANG". One piece hit a light bulb and darkened the room. Luckily, it did not hit my friend (he left it and went to the rest room). Although it was the first time for us that R22 could do something like this, I don't think this is a mistake from WE. Weather in my country causes lots of problems with gas gun. Â That is seriously scary. Glad you and your friend were not hurt. I wonder if the casing would have been enough to contain that. Now is r22 (freon) basically the same as duster gas? If so, that has a lower head pressure than propane...maybe you got a freak magazine with an imperfection in the gas chamber metal. Quote Link to post Share on other sites
alston251 Posted April 6, 2009 Report Share Posted April 6, 2009 I'm really scared now. Cause i'm going to get my WE M4 at the summer...... 28-32C Quote Link to post Share on other sites
renegadecow Posted April 6, 2009 Report Share Posted April 6, 2009 Well, to reassure you, none of my mags have blown up. Leak, yes, but not blow up. And its peaking at 34°C nowadays. I'd likely faint first from over exposure when playing under the hot sun without shade. Quote Link to post Share on other sites
alston251 Posted April 6, 2009 Report Share Posted April 6, 2009 That sounds safe enough... Even tough i nearly got heatstroke at last Christmas skirishing outdoors. Quote Link to post Share on other sites
Net Ronin Posted April 6, 2009 Report Share Posted April 6, 2009 (edited) Thats really strange seeing as R22 has similar vapor pressure to propane. Of course there's temperature; leave it under the sun and go over 40°C without the cover is asking for trouble as that will peak to well over 200psi. But still, you should stop using that as it eats ozone like a sugar-deprived child with a bag of oreos. And don't use them without the covers because it adds structural support. edit: VVV hfc134a=duster gas r22~similar to but not the same as green gas/propane  It was during the night around 21:00. The weather was a around 36-37. "But still, you should stop using that as it eats ozone like a sugar-deprived child with a bag of oreos" This is interesting. Probably need to stop using R22 from now on. Thanks for the info.  Although, I got this incident, I still trust WE. It should be fine when using lower pressure gas. My team has around 16 WE M4 Magazines. Just two got exploded like this. Another broken one was my friend's fault , he left under the Sun with full tank of gas (that gas was not R22. ). Edited April 6, 2009 by Net Ronin Quote Link to post Share on other sites
WETTI Posted April 6, 2009 Report Share Posted April 6, 2009 Guys the real concern is the new barrel and bucking nub that was said to released "REAL SOON"...........Well it still is not available. I have resorted back to my AEG because I couldn't hit the ground if I aimed at it with my WE. There is all this concern with MB and DD barrel nuts and so on......limited edition AB WE M4's. Guys I'm all so sorry for the floating valves in stainless steal I have promised. The guy that has made them is NOW unable to be reached. He has them finished and is siting on something he can not use so I'm aggravated. I've broken every brass floating valve I have received and I'm not going to spend $20 shipping for a $20 part. TS one having problems. How do I get a steel valve assembly and a New barrel for a reasonable price. Is horizon selling steel valve assemblies yet or can Jeff hook up on the new barrels? Â Pls PM me & I see if I can help. Quote Link to post Share on other sites
DELTA Posted April 6, 2009 Report Share Posted April 6, 2009 I got my refund from TSOne today, so they are working through the refunds slowly. So cheers WETTI if you had a little chat to them for me. Â Now i just have to wait for this "C02 Version M4" to arrive so i can re-rorder. Can you give us a rough idea when this is expected to be released WETTI. I know you said soon, but what are we talking here, weeks, months? Quote Link to post Share on other sites
Airsoft Buddy Posted April 6, 2009 Report Share Posted April 6, 2009 (edited) New reinforced parts from WE. Â http://www.airsoftbuddy.com/index_eproduct...products_id=264 Edited April 6, 2009 by Airsoft Buddy Quote Link to post Share on other sites
WETTI Posted April 6, 2009 Report Share Posted April 6, 2009 I got my refund from TSOne today, so they are working through the refunds slowly. So cheers WETTI if you had a little chat to them for me. Â Now i just have to wait for this "C02 Version M4" to arrive so i can re-rorder. Can you give us a rough idea when this is expected to be released WETTI. I know you said soon, but what are we talking here, weeks, months? Â We're planning on before the end of Apr., most of the kinks had been worked out & the boys back home just have to do a bit more testings on it; then we'll be ready. Quote Link to post Share on other sites
julietcharlie Posted April 6, 2009 Report Share Posted April 6, 2009 Just as I guessed now my still unused-because-of-the-missing-o-ring-steel nozzle is already obsolete. Maybe I can bring mine to a machine shop and have it on a lathe to make another groove for an additional o-ring. Quote Link to post Share on other sites
redline Posted April 7, 2009 Report Share Posted April 7, 2009 We're planning on before the end of Apr., most of the kinks had been worked out & the boys back home just have to do a bit more testings on it; then we'll be ready. Â lol! You had a missing O-ring too??!! My steel nozzle came with no O-Ring. TS-1 said they're gonna send me an O-ring..hope its true. Quote Link to post Share on other sites
Eliminator Posted April 7, 2009 Report Share Posted April 7, 2009 I'm going to modify the part #42 that is sold at AB in order to have a 400-420fps valve system for sniping, since 500fps is too much here...I'll let you know once I setted it at 400fps. On the other hand, the actual power of that valve is around 280fps, with a peak measured at 291. But beside this low lookalike power setting, my BBs reach 70meters, while they reach more that 100meters with the 500fps valve. Quote Link to post Share on other sites
somegirls Posted April 7, 2009 Report Share Posted April 7, 2009 New reinforced parts from WE. http://www.airsoftbuddy.com/index_eproduct...products_id=264  Is there a difference between these and the "old" steel nozzles? or is it just the same nozzle with the piston assembly? Quote Link to post Share on other sites
julietcharlie Posted April 7, 2009 Report Share Posted April 7, 2009 it has two o-rings as seen in the photo Quote Link to post Share on other sites
somegirls Posted April 7, 2009 Report Share Posted April 7, 2009 yeah I saw that, my intention was more like "does it do anything better than the older steel nozzles?" Â I mean, why to buy a reinforced steel nozzles assembly and order another re-reinforced nozzle along with it, to replace the reinforced nozzle with the re-reinforced nozzle. Â I became kind sceptic about all those parts since it turned out that a good bunch of it doesn't really do anything better than the stock parts. Quote Link to post Share on other sites
Lupus78 Posted April 7, 2009 Author Report Share Posted April 7, 2009 Just shredded my first #122 o-ring. First I didn't realize what was wrong as my gun started acting weird and erratic. The gas splatter from charging handle gave me an indication what was happening. I opened the gun, bolt off and the nozzle was very loose and o-ring shredded to pieces. No wonder it worked bad. Good thing I've got five of them as spare. Hopefully I'll be able to align and tighten it again once I've changed the o-ring. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.