Vila Posted April 23, 2009 Report Share Posted April 23, 2009 I just checked everything inside the nozzle looks ok. I didn't see any wear on the valve inside it. As I mentioned before, I do have some wear on the o-ring on the outside of the nozzle. And I only had the gas purging on full auto, but not semi. As of right now, I have a fancy paper weight as it won't fire at all. Quote Link to post Share on other sites
mrezzy Posted April 23, 2009 Report Share Posted April 23, 2009 quick question to all the owners, Â what is the range on your WE M4's with .28g? More than 150 feet effective? Quote Link to post Share on other sites
accuracy Posted April 23, 2009 Report Share Posted April 23, 2009 (edited) DAMN IT. Â So I finally received my RS DD lite rail ar15 barrel nut, direct from DanielDefense and it didn't solve anything. What's interesting is that it seems as if the replica nut was already exactly the same as the RS One. Â I got my MK18 from RSOV. http://rsov.com/index.php?target=products&...product_id=3482 Â There were two issues, first there was like a 1.5mm gap between the receiver and the rail. And then when installed, either it caused the barrel to bend to the left or caused the rail to go to the right a bit. Â Any ideas? Should I just try to return it since RS Barrel nut didn't solve either. Edited April 23, 2009 by accuracy Quote Link to post Share on other sites
Lupus78 Posted April 23, 2009 Author Report Share Posted April 23, 2009 Finally short mags! I've been waiting for these. Â Only if I could get an A1 upper to WE, than I could truly mask my gun to look like an XM177. Quote Link to post Share on other sites
theprodigy Posted April 23, 2009 Report Share Posted April 23, 2009 DAMN IT. So I finally received my RS DD lite rail ar15 barrel nut, direct from DanielDefense and it didn't solve anything. What's interesting is that it seems as if the replica nut was already exactly the same as the RS One.  I got my MK18 from RSOV. http://rsov.com/index.php?target=products&...product_id=3482  There were two issues, first there was like a 1.5mm gap between the receiver and the rail. And then when installed, either it caused the barrel to bend to the left or caused the rail to go to the right a bit.  Any ideas? Should I just try to return it since RS Barrel nut didn't solve either. damn that sucks how did the other guys get a mk18 rail on theirs then? Quote Link to post Share on other sites
trinco Posted April 23, 2009 Report Share Posted April 23, 2009  ProWin WE magazines will release on mid-June. Spec : M4 5.56 20 Rounds (Limited version) WE - 43 rounds BBs  Spec : M4 5.56 30 Rounds (Standard version) WE - 57 rounds BBs Quote Link to post Share on other sites
theprodigy Posted April 23, 2009 Report Share Posted April 23, 2009  ProWin WE magazines will release on mid-June. Spec : M4 5.56 20 Rounds (Limited version) WE - 43 rounds BBs  Spec : M4 5.56 30 Rounds (Standard version) WE - 57 rounds BBs   cool ill take 5 of the 50 rounders. you know what the expected price will be? Quote Link to post Share on other sites
WETTI Posted April 23, 2009 Report Share Posted April 23, 2009 omg... i'm lurking this thread for i don't know how long  Based on these experiences that i see on this forum, it's better to wait untill WE releases a 'fool proof' version? I have absolutely no experience with GBB technics, AEG is no problem but as far as GBB goes...  Would you guys recommend me to wait or is there a V3 of the WE out yet? Only problem is that at the fields in my country are limited to 350 fps. Will the CO2 version with a 300 valve solve this problem?  We now have a worldwide distributor network up & running. In Germany, you can contact SniperAirguns (www.sniperairguns.de); they are our regional sole distributor of all our products. I'm sure they can offer you the advise & help you need.  With regard to the 'version' thing, I'll once again clarify that there is only ONE version: The latest & most updated version. This, as I said, is most likely to be our 'final' or 'ultimate' upgrade of the original AWSS platform (thank you again, in no small part, the effort of the folks here on this wonderful thread). Of course, everything I just said applies only to the WETTI-AFC Custom products only. So when you buy, pls ask your dealer from whom did they purchase their guns from. If you have any questions, pls feel free to drop me a line (PM) & I'll try to assist you in whichever way I can)  Thank you again for your support!!  WETTI www.weairsoft.com Quote Link to post Share on other sites
trinco Posted April 23, 2009 Report Share Posted April 23, 2009 cool ill take 5 of the 50 rounders. you know what the expected price will be? Â they didn't mention about the price yet.. since its CNC'd im guessing maybe around $60-$70 each for 57rds and $40-$50 for 43rds, i might be wrong but yea time will tell... if the price is right then i'll take 3x57rds and 2x43rds... so be prepared to go on a diet Quote Link to post Share on other sites
WETTI Posted April 23, 2009 Report Share Posted April 23, 2009 This is interesting..  http://www.youtube.com/watch?v=6d8kN7_U01c  ..More.. :]  http://www.youtube.com/watch?v=ijnMEZmcGfc...re=channel_page  http://www.youtube.com/watch?v=OZ1MSBCeyJ4...feature=channel  http://www.youtube.com/watch?v=wZ-SwGM-qFg...feature=channel  hehe....perfect timing for our A3... Quote Link to post Share on other sites
somegirls Posted April 23, 2009 Report Share Posted April 23, 2009 Guys I have a problem with my magazine. Â The upper valve is leaking. I lubed the heck out of it and it still does. The kinky thing is that if I lock the bolt back (yes, with the steel bolt catch and a shortened bolt catch lever spring it works!) and insert the magazin in the magwell there is even more gas leaking for some strange reason. Â Does that sound familiar to anyone? How can I fix the leaking valve? Quote Link to post Share on other sites
WETTI Posted April 23, 2009 Report Share Posted April 23, 2009 To All:  WE is proud to announce the release of our new website:www.weairsoft.com  The website materials will be updated on a daily basis, as our projects are coming 'fast & furious'...  Do feel free to give us suggestions on how we may serve you better in the future.  Last, but definitely not least, you can find on there our Worldwide Distribution/Service network. So from now on, you'll be able to order your guns, parts or obtain services from a dealer near you, regardless of where you are. In addition, our network is also expanding daily.... as we're currently in negotiaion with interested parties in France, New Zealand, San Marino, Estonia, Argentina, S. Africa, Sweden, Denmark, as well as other countries to set up sales/parts/service centers near you.  WE thank you again for your continuous support and, in return, WE pledge to continously refine & improve upon on all our products & service.  Kindest regards,  WETTI www.weairsoft.com Quote Link to post Share on other sites
somegirls Posted April 23, 2009 Report Share Posted April 23, 2009 Some of the images aren't working and the menu bar doesn't work in Internet Explorer. Either I just can't click on the link or it says "Website is not available" Â But it looks great so far! Â Quote Link to post Share on other sites
w0lfy Posted April 23, 2009 Report Share Posted April 23, 2009 Quick question for all you WE users; Have you noticed a problem with the recoil knocking your optics off alignment, or is the recoil not strong enough to do that? This gun broke 2 of my aimpoints. First was made by King Arms, the other by G&P. Because of this I am considering buying a real steel version for use with all my airsoft guns. I know it is more expensive, but I buy it once and should work for life with airsoft guns and proper care. Quote Link to post Share on other sites
Chevieblazer Posted April 23, 2009 Report Share Posted April 23, 2009 This is interesting..  http://www.youtube.com/watch?v=6d8kN7_U01c  ..More.. :]  http://www.youtube.com/watch?v=ijnMEZmcGfc...re=channel_page  http://www.youtube.com/watch?v=OZ1MSBCeyJ4...feature=channel  http://www.youtube.com/watch?v=wZ-SwGM-qFg...feature=channel   that's funny. I thought Prowin cancelled those mags a while ago Quote Link to post Share on other sites
renegadecow Posted April 23, 2009 Report Share Posted April 23, 2009 Most other magazines like the WA mags from my understanding do not have these compartments. A friend of mine opened up his WA mag to find a complex structure inside to prevent liquid gas from pooling at the valve even when upside down. He can shoot his M4 upside down. But it does cool down quicker than the WE even when right side up. Quote Link to post Share on other sites
WETTI Posted April 23, 2009 Report Share Posted April 23, 2009 Some of the images aren't working and the menu bar doesn't work in Internet Explorer. Either I just can't click on the link or it says "Website is not available" Â But it looks great so far! Â According to our hosting company: Global acccess will take effect within 24 hrs. Quote Link to post Share on other sites
1st Commando Posted April 23, 2009 Report Share Posted April 23, 2009 excellent but what happened to UK stockists ? Â Quote Link to post Share on other sites
Horsem4n Posted April 23, 2009 Report Share Posted April 23, 2009 that's funny. I thought Prowin cancelled those mags a while ago interestingly enough, it was PGC who canceled them. now, i'm guessing they handed the project off to ProWin(or maybe they just picked the project back up because of popular demand) Quote Link to post Share on other sites
4boost Posted April 23, 2009 Report Share Posted April 23, 2009 interestingly enough, it was PGC who canceled them. now, i'm guessing they handed the project off to ProWin(or maybe they just picked the project back up because of popular demand) Â Hmm, I thought PGC and Prowin were pretty much the same company. Quote Link to post Share on other sites
1st Commando Posted April 23, 2009 Report Share Posted April 23, 2009 they are  Quote Link to post Share on other sites
redline Posted April 23, 2009 Report Share Posted April 23, 2009 Guys I have a problem with my magazine. The upper valve is leaking. I lubed the heck out of it and it still does. The kinky thing is that if I lock the bolt back (yes, with the steel bolt catch and a shortened bolt catch lever spring it works!) and insert the magazin in the magwell there is even more gas leaking for some strange reason.  Does that sound familiar to anyone? How can I fix the leaking valve?  I had this problem. I tried to lube it like crazy and it still leaked. So what I did, was remove the valve. Turned out, one of the o-rings was misaligned. The next step was putting it back in. It still leaked, so I just thightened in more. Wala! No more leak!  Quote Link to post Share on other sites
redline Posted April 23, 2009 Report Share Posted April 23, 2009 I just checked everything inside the nozzle looks ok. I didn't see any wear on the valve inside it. As I mentioned before, I do have some wear on the o-ring on the outside of the nozzle. And I only had the gas purging on full auto, but not semi. As of right now, I have a fancy paper weight as it won't fire at all. Â Vila, I had the same issue as well. Nozzle was ok. Turns out, it was the shredded o-ring. It didn't form enough of a seal to blow the bolt all the way back. Quote Link to post Share on other sites
Nazio Posted April 23, 2009 Report Share Posted April 23, 2009 I have similar problem with one of my mags, but in another lower valve is leaking Quote Link to post Share on other sites
lukvdh Posted April 23, 2009 Report Share Posted April 23, 2009 To All: Â WE is proud to announce the release of our new website: www.weairsoft.com .... Â Points to 'tradebig.com' website over here ??? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.