Lupus78 Posted June 5, 2009 Author Report Share Posted June 5, 2009 WELL made their Mp5K. Some of my friends said it was decent. It's only $95 shipped from EbayBanned I've had both, the Maruzen MP5K and this new Well MP5K. Well is just a direct clone of the Maruzen. It still fires with open bolt and has a plastic body, fixed hopup and no bolt stop. It just feels too much like a cheap children's toy to me. And I believe that it won't handle green gas for long without breaking. I haven't used much either one of them anymore, since these days I'm quite unwilling to use any other gun than my beloved WE M4... I love just love it so much. And there's no going back to electric (although the new TM system seems promising). When WE comes up with a full-size MP5A3 or SD3 (the one with SEF-selector) with a metal body and realistic operation, I'm definitely getting one! If there's no A3 or SD3 coming then A5 or SD6 could do. Quote Link to post Share on other sites
Cephas Posted June 5, 2009 Report Share Posted June 5, 2009 Does anyone know where to get 300 fps steel nozzles? I've looked everywhere and can't find them anywhere. Or should I just buy the CO2 nozzle set? Quote Link to post Share on other sites
somegirls Posted June 5, 2009 Report Share Posted June 5, 2009 Did anyone try one of those Madbull amplifier can-flashhiders? Would be interesting to know how they work. by the way, don't try this at home: Quote Link to post Share on other sites
trinco Posted June 5, 2009 Report Share Posted June 5, 2009 looking good there somegirls... but it will be more sexier if u have a 10" barrel eheheh Quote Link to post Share on other sites
somegirls Posted June 5, 2009 Report Share Posted June 5, 2009 thanks for the needle buddy. Get the gastube back on. All you have to do is to knock that small pin that blocks the gastube-channel out. Very easy. Do you have the limited edition madbull barrelnut on? Quote Link to post Share on other sites
trinco Posted June 5, 2009 Report Share Posted June 5, 2009 thanks for the needle buddy. Get the gastube back on. All you have to do is to knock that small pin that blocks the gastube-channel out. Very easy. Do you have the limited edition madbull barrelnut on? lol... yup madbull barrel nut... u can buy straight from strykeairsoft.com, it will cost around $26 usd Quote Link to post Share on other sites
Tyrion_Cro Posted June 5, 2009 Report Share Posted June 5, 2009 Accuracy I don't know if that is a fact but my bolt carrier that is set at 330fps seems to have less over hop than my 450 one. It actually shoots really accurate. The 450 has a little bit of a over hop but once I use the .30's it flattens. What is the effective range of the 330fps setup? Quote Link to post Share on other sites
Eliminator Posted June 5, 2009 Report Share Posted June 5, 2009 (edited) QUOTE (Tyrion_Cro) What is the effective range of the 330fps setup? Mine shoots at nearly 70meters Does anybody own a WE M4 GBB rifle in its CO2 version? I guess I'll be the first in France to own one(in fact a regular gas one build as CO2) I'm building a full one, starting from my spare Lower Receiver and Stock Edited June 5, 2009 by Eliminator Quote Link to post Share on other sites
Chevieblazer Posted June 5, 2009 Report Share Posted June 5, 2009 Could somebody link me to those aftermarket outer barrels? Couldn't find them at AB or TSone Quote Link to post Share on other sites
renegadecow Posted June 5, 2009 Report Share Posted June 5, 2009 (edited) Both of you need an M203 Heck everyone should buy Magpul MOE handguards and stick an M203 underneath. Although I think the handguards I bought are fake being that 1) they're really wobbly and 2) I got em for $18. Edited June 5, 2009 by renegadecow Quote Link to post Share on other sites
somegirls Posted June 5, 2009 Report Share Posted June 5, 2009 (edited) looks amazingly cool with the moe handguard. The 10" barrels aren't officially available yet, only the 7". Edited June 5, 2009 by somegirls Quote Link to post Share on other sites
4boost Posted June 5, 2009 Report Share Posted June 5, 2009 Stag Arms traded receiver.... http://airsoftbuddy.com/index_eproduct_vie...products_id=396 Quote Link to post Share on other sites
HSOJGNILRAD Posted June 5, 2009 Report Share Posted June 5, 2009 Here is one of mine since everyone else is flaunting. Quote Link to post Share on other sites
somegirls Posted June 5, 2009 Report Share Posted June 5, 2009 That's the 9,5" DD rail, right? sweet Quote Link to post Share on other sites
HSOJGNILRAD Posted June 5, 2009 Report Share Posted June 5, 2009 That's the 9,5" DD rail, right? sweet You know your rails well Quote Link to post Share on other sites
Involved6 Posted June 5, 2009 Report Share Posted June 5, 2009 Still waiting on my CO2 version from Horizon Tactical. Getting quite impatient, though I know it's not Jeff's fault, so getting mad is useless. Quote Link to post Share on other sites
rottenotto Posted June 5, 2009 Report Share Posted June 5, 2009 Stag Arms traded receiver.... http://airsoftbuddy.com/index_eproduct_vie...products_id=396 Yeck.....why Stag?? The lamest trades in the entire AR15 world. Quote Link to post Share on other sites
trinco Posted June 5, 2009 Report Share Posted June 5, 2009 Yeck.....why Stag?? The lamest trades in the entire AR15 world. hahaha true lol... Quote Link to post Share on other sites
HSOJGNILRAD Posted June 5, 2009 Report Share Posted June 5, 2009 Yeck.....why Stag?? The lamest trades in the entire AR15 world. Seriously I would love to get my hands on a AFC colt lower receiver......I wish someone was selling one. Quote Link to post Share on other sites
renegadecow Posted June 6, 2009 Report Share Posted June 6, 2009 (edited) If they made a lefty Stag receiver then it would have been impressive. Still, stag does have quite a reputation in the LE/civilian AR-15 world. Edited June 6, 2009 by renegadecow Quote Link to post Share on other sites
rottenotto Posted June 6, 2009 Report Share Posted June 6, 2009 If they made a lefty Stag receiver then it would have been impressive. Still, stag does have quite a reputation in the LE/civilian AR-15 world. STAG=CMT (Continental Machine and Tool). No doubt CMT makes quality/low cost receivers. They make for RRA, High Standard, Noveske, Century, Global Tactical, Smith & Wesson, and others. STAG is CMT's own company they formed. And laughably the ugliest, lamest, most "non tactical" trademarks ever put on an AR lower receiver. Weak. Not just my opinion, but many shooters. Quote Link to post Share on other sites
Carsten Posted June 6, 2009 Report Share Posted June 6, 2009 Is there any reliable source for the CO2 Conversion Kit and CO2 Mags in Europe? Quote Link to post Share on other sites
Hite Posted June 6, 2009 Report Share Posted June 6, 2009 Land warrior airsoft told me they were going to have the WE co2 stuffs in, in 4 weeks, that was last week.... Tactical Quatermaster probably will have the stuff in stock soonish.. hite Quote Link to post Share on other sites
lukvdh Posted June 6, 2009 Report Share Posted June 6, 2009 (edited) Is there any reliable source for the CO2 Conversion Kit and CO2 Mags in Europe? I guess 'sniperairguns.de' will have those soon, being the 'representatives' for WETTI, and being 'active' on the WE M4 GBB front (they have a lot of parts for this gun in their webshop, don't know if they really have everything in stock all the time, time will tell). Edited June 6, 2009 by lukvdh Quote Link to post Share on other sites
Carsten Posted June 6, 2009 Report Share Posted June 6, 2009 (edited) I know those shops, yes.. "Tactical Quatermaster" hasn't updated the shop for a long time now,.. airsoft-one.be has no WE parts/M4 anymore and sniperairguns.. who know when they'll have those stuff.. TS One is dead/non existent anymore and I don't really trust AB after this bolt carrier story.. ..so I guess there is actually no shop here in EU with those stuff in stock right now.. Edited June 6, 2009 by Carsten Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.