WarChild Posted July 9, 2009 Report Share Posted July 9, 2009 We carry them: http://www.airsplat.com/Items/GR-WE-M4-GBB.htm. I personally love my We M4. Accurate and a great training tool. This platform kicks, epecially here in CA during July. Respectfully, Airsplat.com hmmm, that's funny. 8 days ago i contacted you to buy your entire inventory of these and was told you don't have any. here was my email to you: date Wed, Jul 1, 2009 at 12:21 PM subject quick dealer question about stock level hello: i have a dealer account with you guys and i'm interested in placing a very large purchase. before that, though, i need to know how many of item code: GR-WE-M4-GBB that you have in stock? thanks! and this was your response 12 minutes later: date Wed, Jul 1, 2009 at 12:33 PM subject Re: quick dealer question about stock level Dear Customer, It is very nice to hear from you. We welcome any questions or concerns. Regarding your recent email, we do not have any right now but should be receiving some within a couple weeks. Thank you again for your interest in our products. If you have any further questions please feel free to contact us again. Sincerely, Tom Customer Services AirSplat.com so....do you really have them or not?? Quote Link to post Share on other sites
BrooklynBorn Posted July 9, 2009 Report Share Posted July 9, 2009 OMG! ADJUSTABLE NOZZLE FOR AWSS! Anyone heard of TS custom? http://airsoft123.com/index_eproduct_view.php?products_id=15 Only $43 shipped, ut I'd trust RA Techs more expensive one much more. From 250 to 550 FPS? Quote Link to post Share on other sites
rvp69 Posted July 9, 2009 Report Share Posted July 9, 2009 OMG! ADJUSTABLE NOZZLE FOR AWSS! Anyone heard of TS custom? http://airsoft123.com/index_eproduct_view.php?products_id=15 Only $43 shipped, ut I'd trust RA Techs more expensive one much more. From 250 to 550 FPS? i did some fps numbers on this....i have posted the results in the technical section,it all true.. Quote Link to post Share on other sites
BrooklynBorn Posted July 9, 2009 Report Share Posted July 9, 2009 i did some fps numbers on this....i have posted the results in the technical section,it all true.. Oh, nice. But, since I now chairsoft, I want to just keep it at the stock like 520 Quote Link to post Share on other sites
rvp69 Posted July 9, 2009 Report Share Posted July 9, 2009 Oh, nice. But, since I now chairsoft, I want to just keep it at the stock like 520 lol the highest setting is actually the lowest adjustment on the rod,i did not take it fully down..my m4 was doing 520 with the standard brass nozz out of the box on .20 ,my m16 dose that on .25 Quote Link to post Share on other sites
BrooklynBorn Posted July 9, 2009 Report Share Posted July 9, 2009 lol the highest setting is actually the lowest adjustment on the rod,i did not take it fully down..my m4 was doing 520 with the standard brass nozz out of the box on .20 ,my m16 dose that on .25 Wow. That's, insane. Have I seen you on Youtube? Or some airsoft video? Quote Link to post Share on other sites
rvp69 Posted July 9, 2009 Report Share Posted July 9, 2009 Wow. That's, insane. Have I seen you on Youtube? Or some airsoft video? hahaha no not at all I shortened the inner barrel of my m4 which helps lower fps,the rod tests i did was on the m16 Quote Link to post Share on other sites
BrooklynBorn Posted July 9, 2009 Report Share Posted July 9, 2009 Probably not relevant, but a guy on ASF got a WE M4 in the Box of Awesomeness deal for $20 that Evike had. Among other things, he got a gas gun, and BB's. I hate him. His M4 was without trades, dirty, and had a dusty box. Could this have been a test rifle given a while back? Quote Link to post Share on other sites
Cobbcore11 Posted July 9, 2009 Report Share Posted July 9, 2009 yeah evike got 1 of the early US shipments of WE m4s that ended up having a lot of problems unlike the later WE m4s. Quote Link to post Share on other sites
Ian24 Posted July 9, 2009 Report Share Posted July 9, 2009 Got my adjustable system in but I would like to know how to take my nozzle of the original rod and put it back on my new rod... Quote Link to post Share on other sites
cocofr69 Posted July 9, 2009 Report Share Posted July 9, 2009 Got my adjustable system in but I would like to know how to take my nozzle of the original rod and put it back on my new rod... http://www.youtube.com/user/Latparts Quote Link to post Share on other sites
Ian24 Posted July 9, 2009 Report Share Posted July 9, 2009 Do I have to use a blowtorch to loosen the rod?? isn't there another solution? Quote Link to post Share on other sites
renegadecow Posted July 9, 2009 Report Share Posted July 9, 2009 Heat is pretty much the only way to loosen the threadlock applied on it at the factory. I've tried using a candle and it still wouldn't budge. Ended up buying a complete nozzle assembly instead. Quote Link to post Share on other sites
somegirls Posted July 9, 2009 Report Share Posted July 9, 2009 Almost finished. Only thing missing is a silver 10" barrel. Quote Link to post Share on other sites
Marky [UE] Posted July 9, 2009 Report Share Posted July 9, 2009 Almost finished. Only thing missing is a silver 10" barrel. Looking really nice, where did you get the flash from and what thread is it? On another note has anyone read my earlier post re semi/auto issues, I am really struggling here. Quote Link to post Share on other sites
somegirls Posted July 9, 2009 Report Share Posted July 9, 2009 I bought the Dytac M4 2000 surpressor with scar flashhider. Thread is + (CW) of course. Quote Link to post Share on other sites
alston251 Posted July 9, 2009 Report Share Posted July 9, 2009 On the Eb 7inch lite rail... Does the gas tube fit through?? Quote Link to post Share on other sites
somegirls Posted July 9, 2009 Report Share Posted July 9, 2009 can't speak for the 7" but on mine it did. Quote Link to post Share on other sites
alston251 Posted July 9, 2009 Report Share Posted July 9, 2009 can't speak for the 7" but on mine it did. Thanks. It probably does then. The only problem is to find one.... Quote Link to post Share on other sites
TDS Posted July 9, 2009 Report Share Posted July 9, 2009 The quantity of the production run greatly influences price on CNCd products. That $500 receiver from before (can't remember now what exactly) was made in limited quantity hence the price. This new receiver, although similar if not the same in manufacturing processes and quality, will be cheaper by a factor of Airsoft 123s definition of "larger quantities". The initial run of any cnc job is always alot higher to pay for the initial cost of paying an engineer to sit and create the cnc program(s) to make the parts, after that you can pretty much throw whatever you want into the cnc mill/whatever and create the parts out of wood, metal, cowpies, anything. All I was saying was that 7075 (if that is actually what they are made of, which would supprise me) is a waste of money, 6061 would reduce cost in materials and tool wear while most of the reason you would pick 7075 are nonsense for an airsoft reciever. Airsoft parts manufacturers are always trying to one-up the last guy "aluminium, CNC aluminium, DURALUMINIUM!!!" when in reality most of it is still made of the same ######, I really dont think they are doubling or more the material costs of making these parts for no reason. Quote Link to post Share on other sites
mikererie Posted July 9, 2009 Report Share Posted July 9, 2009 (edited) Got a new Olympic Arm WE M4, had an issue, turns out there was no ball bearing in the hopup. Edited July 9, 2009 by mikererie Quote Link to post Share on other sites
HSOJGNILRAD Posted July 9, 2009 Report Share Posted July 9, 2009 Got a new Olympic Arm WE M4, had an issue, turns out there was no ball bearing in the hopup. Olympic Arm???????? When did I miss this release? Quote Link to post Share on other sites
aidan mc Posted July 9, 2009 Report Share Posted July 9, 2009 (edited) Thanks. It probably does then. The only problem is to find one.... got this one on mine http://www.ebairsoft.com/tactical-handguard-p-904.html, fits good, hole for gas tube is there ect. Edited July 9, 2009 by aidan mc Quote Link to post Share on other sites
BrooklynBorn Posted July 9, 2009 Report Share Posted July 9, 2009 Olympic Arm???????? When did I miss this release? Only place in the US that carries them is TheWarStore in Upstate New York. Other than that, I know of no place. http://thewarstore.org Quote Link to post Share on other sites
HSOJGNILRAD Posted July 9, 2009 Report Share Posted July 9, 2009 Only place in the US that carries them is TheWarStore in Upstate New York. Other than that, I know of no place. http://thewarstore.org Trip on that.....now there is 4 different trades available on the receiver to choose from. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.