L4byr1nth Posted September 1, 2009 Report Share Posted September 1, 2009 That stock... Kill it with fire... Ben. Quote Link to post Share on other sites
kojak Posted September 1, 2009 Report Share Posted September 1, 2009 Not my cup of tea either, but it's not so bad on a DMR, like so. Quote Link to post Share on other sites
L4byr1nth Posted September 1, 2009 Report Share Posted September 1, 2009 Actually, that's not far off what I want mine to look like... Still not sold on the stock, though Ben. Quote Link to post Share on other sites
alston251 Posted September 2, 2009 Report Share Posted September 2, 2009 UBR maybe? It sure won't be as balanced as the "tacti-cool DMR stock". Not as adjustable too. I personally think it looks ugly too. But looks like real comfortable when used. Ur not going to stare at ur scope while shooting anyway. Quote Link to post Share on other sites
Kowalsky Posted September 2, 2009 Report Share Posted September 2, 2009 (edited) Small ballistic question: when shooting from my window(at 5-6m from the ground)my BBs start heading the sky after nearly 50-60m. When shooting on the ground will be the trajectory as flat as with a perfectly setted up hop up? Well, 5-6m means you have 5-6m of "probable" winds below your bb trajectory, so any ascendant air will for sure make your bb go up as soon as the ball loses its initial energy and starts relying on the hop-up effect for extra distance. Where the bb should fall (in a no-hop situation), that small hop-up rotation negates the upcomming pressure and accumulates it under the bb (pretty much what plane wings do), so any extra presure (ascending air in that case) will make the bb to go up (until the Hop-up effect slows down and gravity does its job). Not really a hop problem, it's more of a "ball-istic" problem here, taking into consideration the weight of the projectile, the "underball" air pressure, and the energy applied to that projectile (ofc there are many other factors involved, but don't mean to get you bored ) Edited September 2, 2009 by Kowalsky Quote Link to post Share on other sites
L4byr1nth Posted September 2, 2009 Report Share Posted September 2, 2009 No-one answered on the LaRue RIS; 1./ Is a 12" RIS the correct length for an M16A3 to fit without any extra parts? 2./ Anyone know of any RIS systems that fit a WE M4? Maybe I can get the same, but in a longer length, for my M16A3. Ben. Quote Link to post Share on other sites
somegirls Posted September 2, 2009 Report Share Posted September 2, 2009 got the DD MK18 RIS II from EB, fits perfectly. But any King Arms will fit as well, and the D'Boys with a little bit of fitting. Quote Link to post Share on other sites
L4byr1nth Posted September 2, 2009 Report Share Posted September 2, 2009 Can you link to the exact one? Ok, so does anyone know any that definitely won't fit? Ben. Quote Link to post Share on other sites
somegirls Posted September 2, 2009 Report Share Posted September 2, 2009 This is the one I have Madbulls don't fit unless you get the mil-spec barrel nut. Quote Link to post Share on other sites
trinco Posted September 2, 2009 Report Share Posted September 2, 2009 i also got my DD MK18 RIS II from EB last 2 weeks and yup it fits like a champ! somegirls, i think my setup will look just like yours the only thing is im using 552 and tracer unit where can i get RS magpul MIAD grip & BAD lever? Quote Link to post Share on other sites
Manu le maboul Posted September 2, 2009 Report Share Posted September 2, 2009 I'm also looking for a BAD lever, but it's said "coming soon" on magpul's website. Quote Link to post Share on other sites
trinco Posted September 2, 2009 Report Share Posted September 2, 2009 u can try ebay but the problem is they dont ship internationally Quote Link to post Share on other sites
gsquared Posted September 2, 2009 Report Share Posted September 2, 2009 nor wil anyone outside the US will....( Sorry international Folks) the Item is ITAR restricted..which means BIG fines...if caught.. there's a whole discussion on it an Gas guns... Quote Link to post Share on other sites
somegirls Posted September 2, 2009 Report Share Posted September 2, 2009 Hey trinco, no problem, without you I wouldn't have that barrel I'm in contact with the guys at RATech. I showed them, and am I trying my best convincing them to make some kind of BAD Lever themselves. Will be talking to them again tomorrow and will keep you updated. Quote Link to post Share on other sites
D-JHapyMeal Posted September 2, 2009 Report Share Posted September 2, 2009 Hi there guys, what are the ugprades neccesary for this gun to make it have a heavier blowback? And where can i find a M16A4 handguard that will fir the WE M4? Quote Link to post Share on other sites
somegirls Posted September 2, 2009 Report Share Posted September 2, 2009 A M16 handguard fitting an M4? How is that supposed to work? Quote Link to post Share on other sites
accuracy Posted September 3, 2009 Report Share Posted September 3, 2009 Does anyone know where I could find the entire chamber and valve upgrade? http://airsoftbuddy.com/index_eproduct_vie...products_id=370 Evike said it was in stock, but they lie and then 5 days later, canceled my order. So dumb, they still haven't even updated to show it's Out of stock. http://www.airsoftpost.com/awss-stainless-...gn-p-31266.html Quote Link to post Share on other sites
sandstorm Posted September 3, 2009 Report Share Posted September 3, 2009 A M16 handguard fitting an M4? How is that supposed to work? I thnk that'd be like the DEA special someone built. Handguard going all the way over the flashhider. Pretty neat-looking thing, really, except it was also fitted with 9mm conversion, so it wouldn't work with current WEM4. Quote Link to post Share on other sites
somegirls Posted September 3, 2009 Report Share Posted September 3, 2009 Does anyone know where I could find the entire chamber and valve upgrade? http://airsoftbuddy.com/index_eproduct_vie...products_id=370 Airsoft123.com has them in stock, free shippin' Quote Link to post Share on other sites
accuracy Posted September 3, 2009 Report Share Posted September 3, 2009 Airsoft123.com has them in stock, free shippin' ya but it doens't come with the housing and also it says "* AWSS valve head NOT included in kit. " Quote Link to post Share on other sites
Bamse Posted September 3, 2009 Report Share Posted September 3, 2009 Does anyone know of a shop that stocks the WE M4 AWSS Co2 14.5" (latest version yadayada ;]) ? I've spoken to TQM and they do not ship to Sweden atm, so they're out :/ There are a few not stating what version their having and looking when the product was put online it could be anything from v1 to the latest. And few of them hasn't replied to me in quite a few days (WGC, RedWolf and the usual HK-dragons). Im looking for an instabuy situation here, aslong as I know someone has it in stock Quote Link to post Share on other sites
ViciousV10s Posted September 3, 2009 Report Share Posted September 3, 2009 ya but it doens't come with the housing and also it says "* AWSS valve head NOT included in kit. " Get from airsoftbuddy and they also have the nozzle you can buy alone for $15 USD http://www.airsoftbuddy.com/index_eproduct...products_id=442 http://www.airsoftbuddy.com/index_eproduct...products_id=454 Quote Link to post Share on other sites
lazy seal Posted September 4, 2009 Report Share Posted September 4, 2009 Hi there guys, what are the ugprades neccesary for this gun to make it have a heavier blowback? And where can i find a M16A4 handguard that will fir the WE M4? you may try the TSC enhanced buffer! the blowback is stronger and solid than the original after using it. http://www.ts-custom.com/detail.php?id=5 Quote Link to post Share on other sites
Manu le maboul Posted September 4, 2009 Report Share Posted September 4, 2009 (edited) There's also the LAT 90% buffer spring. It does increase recoil, a little but it does (it slow down a little the cycle too) . I don't have tried the tsc buffer, but I've read that it does nothing at all . There's also few do it yourself improvements, like polishing friction surfaces . Don't forget to lube the magazine output valve regularly, you'll quickly loose kick otherwise. Edited September 4, 2009 by Manu le maboul Quote Link to post Share on other sites
kimkafwan Posted September 4, 2009 Report Share Posted September 4, 2009 Does anyone know of a shop that stocks the WE M4 AWSS Co2 14.5" (latest version yadayada ;]) ? I've spoken to TQM and they do not ship to Sweden atm, so they're out :/ There are a few not stating what version their having and looking when the product was put online it could be anything from v1 to the latest. And few of them hasn't replied to me in quite a few days (WGC, RedWolf and the usual HK-dragons). Im looking for an instabuy situation here, aslong as I know someone has it in stock In europe? You coulf try these: http://www.arsenal-airsoft.com/produits-ai...M4-M15-M16.html http://www.ab-airsoft.fr/index.php?cPath=136_21_170 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.