renegadecow Posted November 13, 2009 Report Share Posted November 13, 2009 About frakkin time they released it. Was one of the earlier promised things too but at least it's come around. Now to find who stocks it Quote Link to post Share on other sites
bbstriker Posted November 13, 2009 Report Share Posted November 13, 2009 About frakkin time they released it. Was one of the earlier promised things too but at least it's come around. Now to find who stocks it I hope it's not ASB. Â Quote Link to post Share on other sites
lukvdh Posted November 13, 2009 Report Share Posted November 13, 2009 at last a new AEG hopup system!  http://www.aggma.com/portal/index.php/the-...s-by-wetti.html  Just had a look at that aggma article.  Seems interesting. Seems very LATE.  And certainly "in a store nearby in 2012 - 2013" ?  This is the 4 th generation hop-up (and barrel and ...) and WE still believes we should buy this again and again (at the prices the "sole distributors worldwide, if you can find one" ask?)...  If I had bought (but I couldn't because there was no supply, great) every new barrel / hopup / surroundings and some spare hopup rubbers (because, remember, it was a lucky draw to get useable ones) I think for that money I could have bought a nice AGM RIS GBB with plenty of affordable and available parts to play with.  But remember, the WE is such a great gun.   Quote Link to post Share on other sites
somegirls Posted November 13, 2009 Report Share Posted November 13, 2009 (edited) looks like everybody bought the chromebarrel and now they need to make new junk to sell. Â I won't buy one. I mean, WE and WETTI came up with so much ###### that didn't work, so I doubt this one will. Edited November 13, 2009 by somegirls Quote Link to post Share on other sites
Nazio Posted November 13, 2009 Report Share Posted November 13, 2009 (edited) I mean, WE and WETTI came up with so much ###### that didn't work, so I doubt this one will. I do not doubt, i am sure it wont work, just like many things and promises from the past made by WE. Still i cant understand WE policy. Edited November 13, 2009 by Nazio Quote Link to post Share on other sites
lukvdh Posted November 14, 2009 Report Share Posted November 14, 2009 looks like everybody bought the chromebarrel ... Â Â Not chrome, chorme ! Â :-) Â Â Quote Link to post Share on other sites
Nazio Posted November 14, 2009 Report Share Posted November 14, 2009 Just to be fair. I do share opinions about Mark and Tactical Quartermaster, it seem this is the only guy within whole WE network who really cares about his customers. For WE this mate is an example to follow. This shop do not need any adverts because is excellent. Â My personal very big, big thanks for everything what Mark and TQM is doing. Quote Link to post Share on other sites
newcomer Posted November 14, 2009 Report Share Posted November 14, 2009 Me am already thinking of selling me WE for a G&PEE lol Quote Link to post Share on other sites
danielsilva Posted November 14, 2009 Report Share Posted November 14, 2009 Me am already thinking of selling me WE for a G&PEE lol  Been there done that, the very sad truth is that even with the initial problems this gun gave me i've had quite a lot more probs with my old WA/G&P Quote Link to post Share on other sites
Reppyboyo Posted November 14, 2009 Report Share Posted November 14, 2009 TBH it seems WE are the best of a bad bunch. Quote Link to post Share on other sites
Nazio Posted November 14, 2009 Report Share Posted November 14, 2009 Me am already thinking of selling me WE So do i. WE GBBR AWSS v.1 CO2 ready with Magpul PTS CTR stock and 11 mags (7xCO2 + 4xGG), and a lot of spare parts will be for sale soon. Quote Link to post Share on other sites
Bamse Posted November 15, 2009 Report Share Posted November 15, 2009 plz give heads up when u post it ... by pm if possible Quote Link to post Share on other sites
lukvdh Posted November 15, 2009 Report Share Posted November 15, 2009 I've put it there:Â Â Between the bolt catch and the receiver . As you can see, it's very very thin and Translucent so it's very discrete. Â Now my bolt catch stay straight when the bolt catch plate push it up and it catch the bolt with a larger surface than before. Â Â How did you knock the pin /axe out? From front to rear or vice versa ? When I try (very gently) it won't move in any direction and I don't won't to ruin it. Â Thanks! Quote Link to post Share on other sites
somegirls Posted November 15, 2009 Report Share Posted November 15, 2009 to the rear, also to the riffled end of the pin. Â Quote Link to post Share on other sites
lukvdh Posted November 15, 2009 Report Share Posted November 15, 2009 to the rear, also to the riffled end of the pin. Â OK, got it. Â I've got a 0.2 shim in there now but that doesn't solve the bolt-not-locking. Â I will see if I can find a 0.1 shim in a new set somewehere. Â Thanks for the info ! Â Quote Link to post Share on other sites
Reppyboyo Posted November 15, 2009 Report Share Posted November 15, 2009 Add me to the list of selling, auto has decided not to work. I cant be bothered to continue fixing it, never even seen a skirmish yet. Quote Link to post Share on other sites
kojak Posted November 16, 2009 Report Share Posted November 16, 2009 Well my nozzle snapped in two today, but I'm not throwing in the towel yet. Â Going to order myself a nice NPAS to replace it. Quote Link to post Share on other sites
3vi1-D4n Posted November 16, 2009 Report Share Posted November 16, 2009 (edited) LOL, my V1 has been out on the field twice, even though it has thousands of rounds through it now. Â Through all the fixes, from broken floating valve to O-rings freezing up the bolt. Â Both times on the field it died, in a firefight. Which made me switch to my sidearm. Â One time its fractured semi-auto sear, worn hammer sear. Then the next time was followed by a worn trigger sear. Â All 3 parts are now steel, unfortunately the sear sears require a little modding to function properly. Â Only one guy I know have been using his WE M4 full time, and he has had the works done on it as well, except it doesn't die on the field. Â I had an AGM, and while that was also a lot of work to get performing well initially it was a lot less effort overall. Its accuracy was better than AEGs, but FPS was inconsistent as well as the FPS wasn't very high anyways even with the NPAS. So hence why I sold it. Â Its a lot of fuss on the WE, but there is no other alternatives out there shooting accurately with blowback and at its high FPS, sadly... Edited November 16, 2009 by 3vi1-D4n Quote Link to post Share on other sites
Special K Posted November 16, 2009 Report Share Posted November 16, 2009 WETTI? Who was that again..  oh, the guy who came here to have cheap beta testers for his rifles and than left without a sound...  I was thinking the other day, I might be the only one. Some folks here defend the guy saying "He's a busy man!" Not to busy to post all over these boards when he has a new product to sell. Strange you don't here much from him about fixes for what is turning out to be a expensive gun just to skirm. Quote Link to post Share on other sites
renegadecow Posted November 16, 2009 Report Share Posted November 16, 2009 Truthfully, if only the selling of replacement parts went more smoothly we'd be hearing a whole lot less complaining. If only WE/WETTI themselves could do retail like KJW does. Instead they went through the whole "exclusive dealership" thing and only wound up with parts never in stock or are priced too high because it passes through so many hands. I say skip the middle man and sell parts direct. Quote Link to post Share on other sites
mnmc10 Posted November 16, 2009 Report Share Posted November 16, 2009 i have a v1 we m4 with no markings but with 5 v2 magazines. i am very happy with it, it broke down a couple of times but it worked when i needed it. here are common problems that i managed to fix permanently.  i use .2bbs when set on 300fps .25 if over 450fps  1. over hop  since i have a v1 hop i turned the v1(lathe) inner barrel so it can fit the v2 hop rubber. now the reason why it overhops cause there is too much material peeking in the inner barrel. even if its on off position there is enough rubber to catch the bb thus it over hops. i sanded it down till there is no rubber left on off position. you can confirm this by installing the inner barrel inside the hop assembly but without the black rubber that holds the bb (p#117). make sure the green nub is not visible on off position. never needed a bb heavier than .25  2. magazine leaks  when worn out the stock rubber seal is almost the same thickness as the canal or groove it sits in. so no matter how you tighten the screws of the backplate there is just not enough rubber material to make a seal. change the seal with a thicker one like an oring perhaps?? hint hint. now when you tighten the screws you can see a sandwich of rubber in between the backplate and the magazine casing itself, now thats a sure seal. dont forget to apply some medium strength thread locker cause the rapid expansion and contraction caused by filling it with gas and emptying it fast loosens the screw. my mags leaks every once in a while but all i do is to lube it with oil then re tighten the screws. no need for silicon gasket makers and different types of glue that leaves nasty gunk inside my m4.thats just nasty and a backyard quick fix that i cant live with  my m4 is now set to 300fps on .2 using 134a ,cause thats our limit for cqb.  happy fixing, hfc22    Quote Link to post Share on other sites
renton Posted November 16, 2009 Report Share Posted November 16, 2009 Hi I am new to this forum but often vist Gasgun.info forum Before new HOP-UP coming out, my firends and I have develpoed a upgrade CNC HOP-UP system. I've done the test, the accuracy is better than original XX@ (if WE claims that is Hop-Up). The most important is it is now adjustable, no need of heavier BBs to keep straight(.25g .28g .3g is enough) and the installation is quite easy.  For player would like to give it a shot, please drop me a msg. The shipping and price is quite reasonable(Paypal is prefered). After all, I am not make this for living, just for fun.  http://www.gasguns.info/forum/viewtopic.ph...18&start=10  A Shooting Video for your reference : With .28bbs with green gas(12Kg) 25 Meters. In Kneeling position without supprt. Use only 2X red dot sight, might be beter if by 3X   HOP-UP Bulking photo:  HOP-UP function   Quote Link to post Share on other sites
kojak Posted November 16, 2009 Report Share Posted November 16, 2009 I have to ask for help again regarding my jamming issue. Â After several mags the bolt locked in the rear position. Even when I remove the buffer tube, I could not push the bolt forward until I removed both frame pins and allowed the receivers to separate slightly. Â Upon inspection, I found a small notch has been worn into the top surface of the hammer (part #50) just behind the roller. I have ordered the TSC steel hammer, but what could have caused the notch in the first place? Quote Link to post Share on other sites
3vi1-D4n Posted November 16, 2009 Report Share Posted November 16, 2009 You cannot change one steel part and not change the next. It will wear the other parts. Â Basically you need all 3 parts to be steel. Â Then for the semi-auto sear you will need to modify the contact surface to make semi-auto reliable. Â Quote Link to post Share on other sites
kojak Posted November 16, 2009 Report Share Posted November 16, 2009 You cannot change one steel part and not change the next. It will wear the other parts. Basically you need all 3 parts to be steel.  That figures. I was fine with the performance of the stock parts, but now I'm expecting a CNC hammer, trigger and sear, along with an NPAS. I'm more concerned with whatever put the notch in the hammer in the first place, since it's in an area where I never noticed wear before.   Red line shows approximately where the notch appeared. I'll take a photo when I get home. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.