DeltaZero Posted June 6, 2015 Report Share Posted June 6, 2015 (edited) KIC have the Crusader MB556 brake too. I think CKinnerley also has one for sale on here. £20 IFAIK. Edited June 6, 2015 by DeltaZero 1 Quote Link to post Share on other sites
jkpics Posted June 6, 2015 Report Share Posted June 6, 2015 My friend is having problems with the Angry Gun Ambi Selector, the pin goes to far into the dimpels on the cylinder and lockes it up, so please let me know if that was just a lemon part. 1 Quote Link to post Share on other sites
NonEx Posted June 6, 2015 Report Share Posted June 6, 2015 (edited) Well dangit... I had problems with my TSC ambi selector too! (No surprise there though... *fruitcage* TSC ) Was looking at the CAT model first but decided against it since the Angry Gun has a slimmed down handle on the right side. I will let you know Actually I have modded my selector and pin to get more positive clicks on my current stock WE selector so I might get some problems. Should be salvageable with some Dremel work though. Edited June 6, 2015 by NonEx Quote Link to post Share on other sites
jkpics Posted June 6, 2015 Report Share Posted June 6, 2015 The TSC just needs a bit of a workout, when the paint strips off it's great, and now I am not so sure any more as the the brand of this ambi selector, it's the same full size switch on both sides? Quote Link to post Share on other sites
NonEx Posted June 6, 2015 Report Share Posted June 6, 2015 The TSC is slightly slimmed down on the right side. Angry Gun is even more slimmed down on right side. Quote Link to post Share on other sites
Bloodsword Posted June 6, 2015 Report Share Posted June 6, 2015 So I tested the free float rail from my G&P M4 and it worked, added also a few other RS Magpul items and a DD stock. 1 Quote Link to post Share on other sites
NonEx Posted June 9, 2015 Report Share Posted June 9, 2015 So my buddy got a second hand WE XM 177 today. It's open bolt but might be a convert. It seems the "headspacing" of the bolt is off. I.e. the inner barrel and hop up assembly ring in the front of the upper is set too far back, causing the bolt to be sticking out 1-2mms too much out the rear of the upper. When closing it, forcefully (because the nozzle is getting jammed into the hop chamber), it does a "pop" and a "click" sound, as the tension from the nozzle is released and the bolt hops back, causing the upper and lower to stick together. Anyways. I guess what needs to be done is push the hop up seating ring forward a bit. But if I recall correctly that is basically hammered in place. So any tips on how the heck you can move it forward ? Quote Link to post Share on other sites
Alias1983 Posted June 9, 2015 Report Share Posted June 9, 2015 Tsc is bad, ra tech is meh but has parts more reliable than others, in the end you should of got a ghk. I kinda want to get another we m4 but I want better mags for lower temps. If the temp was 50*f I have to use propane, no way around it. Buty indoor don't allow it so I have to buy the we gas. Quote Link to post Share on other sites
renegadecow Posted June 10, 2015 Report Share Posted June 10, 2015 WE XM 177 There never was a closed bolt of the classic ARs so you can rule that out. Are you sure it's the metal bits of the hop chamber that's causing the carrier to stick out backwards? I'm thinking it may be an overly tight rubber. Quote Link to post Share on other sites
NonEx Posted June 10, 2015 Report Share Posted June 10, 2015 Hmmm OK. Good to know. Well we tried slamming the bolt home and it doesn't seat properly and I can also see the metal ring front the upper inside of the chamber in front of the hop unit / loading ramp. Anyways. Going to be doing a full take-down and rebuild of the rifle to check it out. See what happens. Quote Link to post Share on other sites
NonEx Posted June 11, 2015 Report Share Posted June 11, 2015 (edited) Super excited about my PTS Rainier Arms ambi charging handle. Check out this dudes review: Looks promising Edited June 11, 2015 by NonEx Quote Link to post Share on other sites
Rainer1989 Posted June 11, 2015 Report Share Posted June 11, 2015 You can try the Big Dragon copy which is decent and cheap. Quote Link to post Share on other sites
NonEx Posted June 11, 2015 Report Share Posted June 11, 2015 That was mentioned previously but I went with the PTS version. Quote Link to post Share on other sites
icolater Posted June 12, 2015 Report Share Posted June 12, 2015 Iv had one on a wa m4 for a while and they are very nice indeed. Their sold out for a while now for the wa platform unfortunately. 1 Quote Link to post Share on other sites
Rainer1989 Posted June 12, 2015 Report Share Posted June 12, 2015 Still available in some aliexpress shops, for example this. Quote Link to post Share on other sites
Alias1983 Posted June 13, 2015 Report Share Posted June 13, 2015 I am debating on a new we m4 or ghk. I had a we m4 stock and it rocked. Not sure I want to try a new experience system Quote Link to post Share on other sites
NonEx Posted June 13, 2015 Report Share Posted June 13, 2015 Then stick to WE. It will be fine! Quote Link to post Share on other sites
BioRage Posted June 14, 2015 Report Share Posted June 14, 2015 (edited) GHK isn't a big enough jump from WE IMO. Unless you play in cold climate. I switches to viper from ghk now. Edited June 14, 2015 by BioRage Quote Link to post Share on other sites
Habakure Posted June 14, 2015 Report Share Posted June 14, 2015 (edited) I am debating on a new we m4 or ghk. I had a we m4 stock and it rocked. Not sure I want to try a new experience systemDidn't you tell a user (on here) that they should have got a ghk m4, instead of a WE M4? So that means you've already decided (that the ghk is better). . . Edit:- Yeap, post number 7659. Edited June 14, 2015 by Habakure Quote Link to post Share on other sites
Alias1983 Posted June 14, 2015 Report Share Posted June 14, 2015 Hey its there money, I'm a cheapass. Quote Link to post Share on other sites
NightFury Posted June 14, 2015 Report Share Posted June 14, 2015 Doesn't it cost more to get set up with a GHK? Mags for the WE run about 30USD. Significantly cheaper. Along with it is the aftermarket support. Lower cost and longevity. 2 Quote Link to post Share on other sites
Alias1983 Posted June 14, 2015 Report Share Posted June 14, 2015 (edited) Yep, quite a bit more for my build. Love my we, just hated the mags not working for me in 60*f weather. I had no issues with the gun itself functioning. I was very pleased with my old we m4, but you know I felt it lacking a lot when I would rapid fire in semi/auto. Like bbs not effecting from the hop, slow semi it would fire stupid accurate at 225'. I see all these ghk videos of it firing amazing on auto and I get a lil sad. My last we m4 build, I miss it but I should stop being a cheapass and get a ghk. Edited June 14, 2015 by Alias1983 Quote Link to post Share on other sites
BioRage Posted June 14, 2015 Report Share Posted June 14, 2015 If you have money get a GHK, if you don't get a WE. Very simple, downside on GHK the upfront cost, but once it's going it's a beauty. Quote Link to post Share on other sites
NonEx Posted June 15, 2015 Report Share Posted June 15, 2015 And WE's don't allow for the same result? Quote Link to post Share on other sites
Alias1983 Posted June 15, 2015 Report Share Posted June 15, 2015 My we m4 was 99% stock ran extremely hard for 2 years and kept ticking. That's why I kinda want one again. Stock they are very good. Ra tech parts have low quality now. I'm debating on buying the trigger set for my m14 ebr. I just wish mine fed good in auto Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.