rottenotto Posted April 10, 2009 Report Share Posted April 10, 2009 However, the material in that groove is still paper thin. Yep, that's called "flash" or "flashing". This thin unwanted material left behind. Quote Link to post Share on other sites
redline Posted April 10, 2009 Report Share Posted April 10, 2009 WOLFY, your conversion is awesome!! I kinda want a similar cqb look. I like them nice and clean! Did that rail come with an internal gas block? Where does the gas tube end up going? Quote Link to post Share on other sites
trinco Posted April 10, 2009 Report Share Posted April 10, 2009 w0lfy, seriously u're making me jealous! im looking forward getting the 7.25" soon... im converting mine to SBR diplomat Quote Link to post Share on other sites
Airsoft Buddy Posted April 10, 2009 Report Share Posted April 10, 2009 I finally managed to take apart the front part of the external barrel. Funny thing is that I just wanted to take off the flash hinder and the whole front section started to come off. I also managed to install the short inner barrel which went in really easy. Now my GBB replica looks much much better If you changed the stock to Vltor or Magpul and the hand grip, then will be excellent. Quote Link to post Share on other sites
lukvdh Posted April 10, 2009 Report Share Posted April 10, 2009 Hi all, I would like to remove part # 112 from my WE M4 Gbb to polish the entry (as explained somewhere). Can I get to that part without having to disassemble the whole barrel / front end ? Thanks in advance. P.S. Did anyone get the 'missing o-ring' for the Steel Nozzle Assembly yet? Is it the same size as the original part 45? I received two Steel Nozzle Assy's, but the o-rings are not there (so these Nozzle Assemblies are useless at the moment I guess....) Quote Link to post Share on other sites
redline Posted April 10, 2009 Report Share Posted April 10, 2009 Hi all, I would like to remove part # 112 from my WE M4 Gbb to polish the entry (as explained somewhere). Can I get to that part without having to disassemble the whole barrel / front end ? Thanks in advance. P.S. Did anyone get the 'missing o-ring' for the Steel Nozzle Assembly yet? Is it the same size as the original part 45? I received two Steel Nozzle Assy's, but the o-rings are not there (so these Nozzle Assemblies are useless at the moment I guess....) Dude, I think I was the first person to complain of missing 0-rings with the steel assembly. TS-1 said they'd mail me the 0-ring. I don't know whether they've done it yet or not..I haven't recieved any 0-rings thus far... Quote Link to post Share on other sites
renegadecow Posted April 11, 2009 Report Share Posted April 11, 2009 That's interesting renegadecow, I assume you measure the stable and right amount of consistent backspin by judging the flight pattern of the bb? This may sound out of the blue but I think the surest way to measure the rpm and decay rate of a spinning bb is by filming it on a hi-speed camera in the 4000FPS range. Haha just another wishful thinking of mine. Yup, just eyeballing it really. It didn't sky rocket past 20m like the old one did. When my parts arrive to fix it, I'll further test it on paper and maybe compare it to the new barrel and hop if and when I decide to get those too (more likely when). Quote Link to post Share on other sites
theprodigy Posted April 11, 2009 Report Share Posted April 11, 2009 Hi all, I would like to remove part # 112 from my WE M4 Gbb to polish the entry (as explained somewhere). Can I get to that part without having to disassemble the whole barrel / front end ? Thanks in advance. P.S. Did anyone get the 'missing o-ring' for the Steel Nozzle Assembly yet? Is it the same size as the original part 45? I received two Steel Nozzle Assy's, but the o-rings are not there (so these Nozzle Assemblies are useless at the moment I guess....) i would like to know this as well Quote Link to post Share on other sites
Victory Posted April 11, 2009 Report Share Posted April 11, 2009 (edited) Also, once we upgrade, are we still compatible with the original green gas mags? Same question. Pretty sure it hasn't been answered yet. -Vic Edited April 11, 2009 by Victory Quote Link to post Share on other sites
wraithxt1 Posted April 11, 2009 Report Share Posted April 11, 2009 Should the steel valve have two orings? It was missing one when I got it from AB, but I could have sworn there was another on the front of the nozzle somewhere.... Quote Link to post Share on other sites
trinco Posted April 11, 2009 Report Share Posted April 11, 2009 the new Co2 Magazine The new steel nozzle with two o-rings for Co2 magazine WE Gas Blow Back M4 CQBR WE Gas Blow Back M16A3 WE Gas Blow Back M16A3 in mass production One piece outer barrel of WE Gas Blow Back M16A3 Another view of WE Gas Blow Back M16A3 Quote Link to post Share on other sites
rottenotto Posted April 11, 2009 Report Share Posted April 11, 2009 None of your photos are loading..... Quote Link to post Share on other sites
yehaw Posted April 11, 2009 Report Share Posted April 11, 2009 None of your photos are loading..... http://picasaweb.google.com/kcyauwil/WEGas...BackM416Series# these are the pics he wanted to post .. Quote Link to post Share on other sites
accuracy Posted April 11, 2009 Report Share Posted April 11, 2009 http://picasaweb.google.com/kcyauwil/WEGas...BackM416Series# these are the pics he wanted to post .. http://picasaweb.google.com/kcyauwil/WEGas...130728700926418 ^maybe that's why my gun had a couple scratches on it before I even used it. Quote Link to post Share on other sites
Lupus78 Posted April 11, 2009 Author Report Share Posted April 11, 2009 Gotta say that nozzle assembly stabilizer is one real lifesaver. I just installed the thing and there's no way the nozzle could misalign anymore. Anyone who has an older version gun without one should really consider getting it. Quote Link to post Share on other sites
WETTI Posted April 11, 2009 Report Share Posted April 11, 2009 Same question. Pretty sure it hasn't been answered yet. -Vic Absolutely. Quote Link to post Share on other sites
WETTI Posted April 11, 2009 Report Share Posted April 11, 2009 Gotta say that nozzle assembly stabilizer is one real lifesaver. I just installed the thing and there's no way the nozzle could misalign anymore. Anyone who has an older version gun without one should really consider getting it. The stabilizer will be standard on all future AWSS M4s shipped. Quote Link to post Share on other sites
chris u'5 Posted April 11, 2009 Report Share Posted April 11, 2009 (edited) http://picasaweb.google.com/kcyauwil/WEGas...130728700926418 ^maybe that's why my gun had a couple scratches on it before I even used it. I was just thinking exactly the same thing! When I first received mine it had quite a few scratches and marks plus paint loss on some of the furniture I wasn't really that bothered but the condition of the receiver was pretty poor in comparison to all my AEGs when first purchased. So was this the same with everyones WE M4 then? Edited April 11, 2009 by chris u'5 Quote Link to post Share on other sites
1st Commando Posted April 11, 2009 Report Share Posted April 11, 2009 ours were both completely mint . I think the photos above are of test models at the factory , not production run models Quote Link to post Share on other sites
Carsten Posted April 11, 2009 Report Share Posted April 11, 2009 (edited) negatory @ chris u'5 ^^ Edited April 11, 2009 by Carsten Quote Link to post Share on other sites
chris u'5 Posted April 11, 2009 Report Share Posted April 11, 2009 Mmm...well I'm kinda annoyed now! I wish I never asked Quote Link to post Share on other sites
lukvdh Posted April 11, 2009 Report Share Posted April 11, 2009 (edited) "Annoyed". That is the word I was looking for... I have bought 2 Steel Nozzle Assemblies. Those have no o-ring on the nozzle part. Seems nobody who bought these got o-rings. I didn't try yet, but I suppose the assemblies are useless without the o-rings. So I get to this questions: -has someone got the Steel Nozzle Assembly installed and working? -if so: with are without this o-ring? -if "with o-rings": where did you get those? I hope I will find this info (AND the o-rings if needed) real soon. Otherwise I feel "conned". I guess AB gets the Steel Nozzle Assy's from TS-1? And I read even TS-1 didn't send out the o-rings yet? So ALL Steel Nozzle Assemblies sold so far are useless? I'm not happy. But: have a nice weekend you all ! Edited April 11, 2009 by lukvdh Quote Link to post Share on other sites
Net Ronin Posted April 11, 2009 Report Share Posted April 11, 2009 (edited) "Annoyed". That is the word I was looking for... I have bought 2 Steel Nozzle Assemblies. Those have no o-ring on the nozzle part. Seems nobody who bought these got o-rings. I didn't try yet, but I suppose the assemblies are useless without the o-rings. So I get to this questions: -has someone got the Steel Nozzle Assembly installed and working? -if so: with are without this o-ring? -if "with o-rings": where did you get those? I hope I will find this info (AND the o-rings if needed) real soon. Otherwise I feel "conned". I guess AB gets the Steel Nozzle Assy's from TS-1? And I read even TS-1 didn't send out the o-rings yet? So ALL Steel Nozzle Assemblies sold so far are useless? it is around 37-38 degree and high humidity where I live now. I'm not happy. But: have a nice weekend you all ! I have bought 2 steel nozzles (300 fps) from Airsoftbuddy. One is for my gun and another one is for my friend's. Both have been put on WE M4s to replace original ones. They work fine. Although there is no oring in the picture at airsoftbuddy, those I have received have oring on them. And FYI , both gun now shoot around 370 . Edited April 11, 2009 by Net Ronin Quote Link to post Share on other sites
Carsten Posted April 11, 2009 Report Share Posted April 11, 2009 I guess it would be no problem to get some o-rings from a local shop.. there surely be some rings that'll fit for some cents Quote Link to post Share on other sites
redline Posted April 11, 2009 Report Share Posted April 11, 2009 Well...I got the 0-rings from TS-1 for the steel nozzle I ordered from them...but guess what? Wrong 0-rings..*sigh*..I've pretty much given up on them... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.