Manu le maboul Posted August 20, 2009 Report Share Posted August 20, 2009 Tried cyanoacrylate and few loctite products from my work, even a loctite polymer glue specially made for metal with its activator. It's this last one that gave the best results, but it goes off again finally. I really don't understand why they didn't fixed it with a pin or a screw . I think I'll buy the necessary tools and fix it this way by myself, since glues don't seem to like shocks and vibrations . Quote Link to post Share on other sites
Carsten Posted August 21, 2009 Report Share Posted August 21, 2009 pff, as expected, the "very cheap" LaRue receiver is now available http://airsoft123.com/index_ecat.php?cPath=3 FREE SHIPPING WORLDWIDE!! USD$440.00 wow,.. free shipping. /facepalm. Quote Link to post Share on other sites
somegirls Posted August 21, 2009 Report Share Posted August 21, 2009 (edited) Well, at least it's 10 bucks less than the "super limited 100piece edition" Oh, they also have the TSC barrels now. Edited August 21, 2009 by somegirls Quote Link to post Share on other sites
Nazio Posted August 21, 2009 Report Share Posted August 21, 2009 (edited) That sling mount looks ok. I have bought 5KU one which is for WA, but wont fit. Edited August 21, 2009 by Nazio Quote Link to post Share on other sites
alston251 Posted August 21, 2009 Report Share Posted August 21, 2009 Well, at least it's 10 bucks less than the "super limited 100piece edition" Oh, they also have the TSC barrels now. For the name of airsoft don't buy those TSC barrels. They don't fit. And your flash hiders will only go on half way. If you really want one i can give you my 12 incher for FREE! Come get it in Wiltshire. Quote Link to post Share on other sites
somegirls Posted August 21, 2009 Report Share Posted August 21, 2009 Get this one: http://www.ipscgm.com/index.php?main_page=...roducts_id=1568 Personally I had some issues with the site and shipping is too much, but the barrels are great and sit rock solid. Quote Link to post Share on other sites
alston251 Posted August 21, 2009 Report Share Posted August 21, 2009 Get this one: http://www.ipscgm.com/index.php?main_page=...roducts_id=1561 Personally I had some issues with the site and shipping is too much, but the barrels are great and sit rock solid. Corrected. Your original one was for the WA. Quote Link to post Share on other sites
Marky [UE] Posted August 21, 2009 Report Share Posted August 21, 2009 Has anyone managed to fix their semi/auto burst issues yet? I have some more spare parts on the way to swap out in a desperate attempt to get mine fixed, still struggling. Quote Link to post Share on other sites
Nazio Posted August 21, 2009 Report Share Posted August 21, 2009 Nope. By misstake i have received spare #42 - 300fps from TQM, gonna replace it with original one in CO2 valve. May be this is the problem. Quote Link to post Share on other sites
rottenotto Posted August 22, 2009 Report Share Posted August 22, 2009 Yeah, total bogus. I will never ever spend more money on just a reciever than the actual gun costs. All those bodies for the Western arms are around $200, most less. And about the P-Mags: I guess anyone who knows how to operate a dremel and a screwdriver can build his WE M4 mag core into a real steel P-mag. I don't think I will ever buy any TSC product again, since 95% of their stuff either doesn't work at all (enhanced recoil buffer) or ist badly made and need a lot of filing or whatever (KAC style trigger guard). And I already heard that their 12" and 10" barrel wobble and need a boatload of filing. PMC makes great parts for the WE M4. I got a charging handle, a barrel, anti-rotation pins you name it and all those products are perfect, fit and work flawlessly. Oh, and since we're talking about it. I haven't seen even one picture of these "limited" LaRue recievers yet. I agree 100,000% about TSC. And if the truth was told?? There isnt ONE single aftermarket "upgrade" part for the WE worth a dime. (Cosmetic parts and "barrels" are one thing....supposed "internal enhancements" are another.) And as for these "enhanced parts"? People, save your money. Quote Link to post Share on other sites
alston251 Posted August 22, 2009 Report Share Posted August 22, 2009 Well the only thing that works are the TSC mag plates. But thanks to Armed Forces they made a reliable system out of the box. Quote Link to post Share on other sites
MadMax1818 Posted August 22, 2009 Report Share Posted August 22, 2009 seen this http://www.airsoftbuddy.com/index_eproduct...products_id=462 Quote Link to post Share on other sites
lazy seal Posted August 22, 2009 Report Share Posted August 22, 2009 seen this http://www.airsoftbuddy.com/index_eproduct...products_id=462 ??? Anyone tried ??? Quote Link to post Share on other sites
somegirls Posted August 22, 2009 Report Share Posted August 22, 2009 Well, I'd just put a CO2 cartridge in there to see if it's leaks..... pretty embarrasing that such a device even exists. Quote Link to post Share on other sites
alston251 Posted August 22, 2009 Report Share Posted August 22, 2009 Why can't anyone make anything practical for the WE series? AEG hop ups?? Ambi-selectors?? Cheaper metal bodies?? Working adjustable power?? Better mags?? I know Pmags are coming. Hope they are good. Quote Link to post Share on other sites
Hondatech Posted August 22, 2009 Report Share Posted August 22, 2009 seen this http://www.airsoftbuddy.com/index_eproduct...products_id=462 Now, if this thing could safely be filled from a paintball tank with a Madbull co2 adapter... Quote Link to post Share on other sites
renegadecow Posted August 23, 2009 Report Share Posted August 23, 2009 For the longest time I've been hoping for Madbul to make parts for the WE since they started selling the Socom Gear Noveske N4. So far they've only made rails and flash hiders for it. Quote Link to post Share on other sites
jesTer Posted August 23, 2009 Report Share Posted August 23, 2009 I skirmished with mine for the first time yesterday. I was very impressed with the performance and accuracy on .30 BBs. Granted I've only gone through 10 mags worth of BBs on mostly semi-auto only. 1 mag out of 3 leaked badly but settled down after I fired a few bursts out of it. My gun came with the 350+ fps valve and I have the 400+ fps valve. Not sure I should make the switch though. Is it correct to assume that the 400+ fps valve will probably put alot more pressure onto the internal parts and break them much sooner? Also, I know silicone grease is recommended for full maintenance but can I use normal silicone oil for inbetween game maintenance? Quote Link to post Share on other sites
lukvdh Posted August 23, 2009 Report Share Posted August 23, 2009 seen this http://www.airsoftbuddy.com/index_eproduct...products_id=462 Anyone seen and/or tried this similar (but way cheaper) item: http://www.uncompany.com/pageproductdetails.asp?prodid=5813 Quote Link to post Share on other sites
alston251 Posted August 23, 2009 Report Share Posted August 23, 2009 While i was plinking at my house yesterday. I realized all my rounds went to the left. According to my reflex type red dot sight. I know i can't zero at the range of about 2 meters. But is there something wrong with my hop? Or is it just the sight? I'm not too sure. All i know is that the point i hit should be lower than the red dot sight. Quote Link to post Share on other sites
accuracy Posted August 23, 2009 Report Share Posted August 23, 2009 I bought a brand new steel bolt catch, and the TSC Bolt Catch plates, and my gun still isn't locking back every time. Any ideas anyone? Quote Link to post Share on other sites
somegirls Posted August 23, 2009 Report Share Posted August 23, 2009 Did you shorten the spring that pushes the bolt catch lever out? Part 79, I think. I cut it about half way and it works every time now. If so, these plates need some break-in time. Quote Link to post Share on other sites
newcomer Posted August 23, 2009 Report Share Posted August 23, 2009 http://weairsoft.com/products_show.php?id=...;products_id=67 This product is bs. It claims "'Solid Core Technology' - 0% internal bubbles". Yeah right! It's got one huge bubble inside it. I'll post up the photos tomorrow. Funny they claim it's solid core yet if you read the fine prints on the bag it says something like bubbles may form inside the bb if "ejection" (i think they meant injection) mold cools at a faster rate. The green bbs also leave a truck load of green substance on the hop and IB. Will post up these photos too. Quote Link to post Share on other sites
alston251 Posted August 23, 2009 Report Share Posted August 23, 2009 (edited) Unlucky mate. I were going to get them. But meh. KSC is the best option now. Edit: Does anyone know why my shot goes to the left? Edited August 23, 2009 by alston251 Quote Link to post Share on other sites
JM360 Posted August 24, 2009 Report Share Posted August 24, 2009 Unlucky mate. I were going to get them. But meh. KSC is the best option now. Edit: Does anyone know why my shot goes to the left? Are you using the new barrel + hop rubber? Usually the swerve is a sign of overhop. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.