chenster886 Posted October 13, 2009 Report Share Posted October 13, 2009 Ahh... but I am only looking for the upper sir! > http://www.tokyo-model.com.hk/ecshop/goods.php?id=4370 I can't buy it directly 'cuz of the crappy @$$ customs here. Have to pay a premium through local shops... sigh... Are you sure the dytac fits the WE M4? On the website, it says its for the Systema... Quote Link to post Share on other sites
IronWolf Posted October 13, 2009 Report Share Posted October 13, 2009 Are you sure the dytac fits the WE M4? On the website, it says its for the Systema... It can be used by either according to RWA, link You can expect the usual excellence in DYTACs products, this Modular Upper Receiver is CNC milled to perfection, and designed specifically to fit the Systema PTW M4 series and/or the WE M4 GBB series. Quote Link to post Share on other sites
julietcharlie Posted October 13, 2009 Report Share Posted October 13, 2009 Nice Magpul MPLA billet lowers but why sell it with an upper that is just like the stock one? Would have been cheaper if they were available as a lower only. And it would have been alot cooler if they came up with Series A MPLA with the ambi bolt release and the "china doll" Series C lower. http://www.weaponevolution.com/forum/showthread.php?t=755 Quote Link to post Share on other sites
alyaspogi Posted October 14, 2009 Report Share Posted October 14, 2009 Ahh... but I am only looking for the upper sir! > http://www.tokyo-model.com.hk/ecshop/goods.php?id=4370 I can't buy it directly 'cuz of the crappy @$$ customs here. Have to pay a premium through local shops... sigh... hey don't buy this upper cause i bought one a couple of months ago from redwolf it say's it will fit the WE yup it will but it has a lot of wobble with the lower you need to buy the RAtech magic pin and thru my experience it doesn't work. just wait for other companies to make metal body kits.... Quote Link to post Share on other sites
jesTer Posted October 14, 2009 Report Share Posted October 14, 2009 (edited) hey don't buy this upper cause i bought one a couple of months ago from redwolf it say's it will fit the WE yup it will but it has a lot of wobble with the lower you need to buy the RAtech magic pin and thru my experience it doesn't work. just wait for other companies to make metal body kits.... GAH! Too late. The shop has already special ordered for me. I think I'll see it next week or so... The magic pin doesn't work? Edited October 14, 2009 by jesTer Quote Link to post Share on other sites
accuracy Posted October 14, 2009 Report Share Posted October 14, 2009 (edited) well i managed to fix my double feed problem with upgrading to CO2 kit. however, when i pull the trigger to shoot on Full auto mode. The gun will just keep firing non stop until i either pull out the mag or change the selector switch. The reason it does this is because when i let go of the trigger, apparently the return spring isn't powerful enough to overcome the recoil and return it to original position. So if i manually push the trigger forward it will stop firing. Any ideas? Edited October 14, 2009 by accuracy Quote Link to post Share on other sites
julietcharlie Posted October 14, 2009 Report Share Posted October 14, 2009 Your trigger and/or hammer is already worn out, happened to mine too switched to TSC steel trigger group. Quote Link to post Share on other sites
trinco Posted October 14, 2009 Report Share Posted October 14, 2009 however, when i pull the trigger to shoot on Full auto mode. The gun will just keep firing non stop until i either pull out the mag or change the selector switch. Any ideas? well... this happened to me last month so i decided to change to TSC steel internals and problem solved... probably your part #50 & #54 starts to wear so the hammer will not lock to sear properly causing it to burst non stop... Quote Link to post Share on other sites
accuracy Posted October 14, 2009 Report Share Posted October 14, 2009 (edited) ohh. okay thanks guys. Your trigger and/or hammer is already worn out, happened to mine too switched to TSC steel trigger group. do you mean the sear not the trigger? cuz i didn't know that you could wear out the trigger. is there an entire reinforced premade triggerset that i could purchase to save money? otherwise i'm guessing this is what i'll need right?: http://airsoft123.com/index_eproduct_view.php?products_id=6 http://airsoft123.com/index_eproduct_view.php?products_id=7 And do you guys think that my problem with extra gas being expelled after a shot fired could be caused by these parts being worn. Cuz i replaced my chamber and nozzle with the CO2 conv. kit, and it appeared to only help slightly. Edited October 14, 2009 by accuracy Quote Link to post Share on other sites
jesTer Posted October 14, 2009 Report Share Posted October 14, 2009 @ Trinco - are those PMAGS? Where did you get them? Quote Link to post Share on other sites
trinco Posted October 14, 2009 Report Share Posted October 14, 2009 @ Trinco - are those PMAGS? Where did you get them? secret... lol u got PMed~ Quote Link to post Share on other sites
Lupus78 Posted October 14, 2009 Author Report Share Posted October 14, 2009 Just installed Magpul ACS stock (Airsoft version from Redwolf). Sweeeeet! It fits like a glove. Sturdiest thing on earth, even without friction lock. Quote Link to post Share on other sites
Manu le maboul Posted October 14, 2009 Report Share Posted October 14, 2009 I'd like to know where you get the Pmag too; could you PM me please ? . Quote Link to post Share on other sites
L4byr1nth Posted October 14, 2009 Report Share Posted October 14, 2009 Also me pleaz. Ben. Quote Link to post Share on other sites
Reppyboyo Posted October 14, 2009 Report Share Posted October 14, 2009 Its a modification of a real PMAG. Saw it on another forum. Involves gutting the PMAG and sanding the insides down to fit the mag internals. No idea where to get real PMags from in the UK though. Quote Link to post Share on other sites
alyaspogi Posted October 14, 2009 Report Share Posted October 14, 2009 GAH! Too late. The shop has already special ordered for me. I think I'll see it next week or so... The magic pin doesn't work? magic pin will work as my experience when i used the magic pin it really fit perfect but when i pull the trigger all the gas in the mag releases so check yours when you install yours...... here's mine before this is the current i remove the dytac upper Quote Link to post Share on other sites
jesTer Posted October 15, 2009 Report Share Posted October 15, 2009 magic pin will work as my experience when i used the magic pin it really fit perfect but when i pull the trigger all the gas in the mag releases so check yours when you install yours...... D@mn... looks like it'll be a 200 USD paper weight consigned to my closet... Quote Link to post Share on other sites
renegadecow Posted October 15, 2009 Report Share Posted October 15, 2009 Sounds like the Magic Pin pushes the two halves of the receiver apart to lessen the wobble. If so, then a gap would be made between the magazine gasket and the brass tube causing the gas to vent. I'm thinking switching the magazine gaskets to SCAR ones as they are a bit higher than those on M4 mags. That or manually shim the upper receiver pin holes with multiple layers of super glue to bring the two receiver halves together instead of apart. Quote Link to post Share on other sites
Bamse Posted October 15, 2009 Report Share Posted October 15, 2009 Hello again When shooting I find my white stabilizer moving quite a bit, up until the point that it pushes thing out of alignment making it click 100% of the time. Taking the BCG out and pushing the stabilizer back to its original position makes it good to go again. Since the stabilizer is made of a quite "fat" type of plastic the glues I've tried don't help much. Do you guys have any nice tips? Should I just align the rod properly and ditch the stabilizer all together perhaps? Quote Link to post Share on other sites
alston251 Posted October 15, 2009 Report Share Posted October 15, 2009 Snip.... Is that a ambi selector??!?!??!? Quote Link to post Share on other sites
accuracy Posted October 15, 2009 Report Share Posted October 15, 2009 Hello again When shooting I find my white stabilizer moving quite a bit, up until the point that it pushes thing out of alignment making it click 100% of the time. Taking the BCG out and pushing the stabilizer back to its original position makes it good to go again. Since the stabilizer is made of a quite "fat" type of plastic the glues I've tried don't help much. Do you guys have any nice tips? Should I just align the rod properly and ditch the stabilizer all together perhaps? well i could never get my rod to align properly with the stabilizer in the first place. So i just tossed it aside and don't use it. It should be fine considering i've already fired 4000 rounds thru my gun without it. Just make sure you check if it gets loose or anything, or you could loc-tite it as well Quote Link to post Share on other sites
kojak Posted October 16, 2009 Report Share Posted October 16, 2009 AHhh freaking Evike, I was counting on that stock charging handle for a game this weekend and they just now send me the dreaded "one or more of the items you ordered is out of stock". What if I put a layer of epoxy inside the grove of my DPMS handle? Quote Link to post Share on other sites
Nazio Posted October 16, 2009 Report Share Posted October 16, 2009 (edited) Anybody knows if this would fit ? http://www.gunfire.pl/product-eng-11521898...ja-M4-CASV.html Its a modification of a real PMAG. Saw it on another forum. Involves gutting the PMAG and sanding the insides down to fit the mag internals. No idea where to get real PMags from in the UK though. This is was introduced in Gas Guns Forums. I did recently contact manufacturer of G-Mags: http://www.oberlandarms.com/index.php?cate...mp;page=details These are made by German manufacturer on license of Magpull. Here is the answere: For the UK please contact our distributor Rifle Craft Ltd. Mr. A.J. Evans-Hendrick Tel 01379 384230 Edited October 16, 2009 by Nazio Quote Link to post Share on other sites
Bamse Posted October 16, 2009 Report Share Posted October 16, 2009 accuracy: thanks, i'll give it a go and stop on the way home for a gallon of loctite Quote Link to post Share on other sites
renegadecow Posted October 16, 2009 Report Share Posted October 16, 2009 (edited) AHhh freaking Evike, I was counting on that stock charging handle for a game this weekend and they just now send me the dreaded "one or more of the items you ordered is out of stock". What if I put a layer of epoxy inside the grove of my DPMS handle? Epoxy works. I've seen it done to a lot of WE M4 users here. Just don't forget to roughen up the surface and have some allowance for the carrier key. It worked pretty well on mine but decided to use a steel replacement just the same. edit: better do it quick though as most epoxies require 24h minimum curing time. Edited October 16, 2009 by renegadecow Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.