hunter512 Posted August 2, 2009 Report Share Posted August 2, 2009 How much did you pay at w&p? So whats the compatability like with other hops/barrels on this gun? £95. Quote Link to post Share on other sites
Horsem4n Posted August 3, 2009 Author Report Share Posted August 3, 2009 (edited) I also dont see the hop-up unit as a major flaw but you have to admit that it certainly gets anoying when you have to carry a hex key and to remove the cover and then hold the bolt - really anoying it gets i dont find it annoying. but i can see it as being annoying to other people. Edited August 3, 2009 by Horsem4n Quote Link to post Share on other sites
Username_Here Posted August 4, 2009 Report Share Posted August 4, 2009 Just like to say that if you thread the hole found in this picture and screw in a grub screw you adjust the trigger pull. Not really useful info, but I found it to be a nice little addition to my AtoZ when I had it. Quote Link to post Share on other sites
Horsem4n Posted August 4, 2009 Author Report Share Posted August 4, 2009 (edited) thats cool, i have to check that out. EDIT: ok after looking onto this, i find that its not something i want to do. the hole is directly below the front of the main sear. it front of its pivot point. if you have the sear even a half a millimeter pre disengaged, the safety will not keep the gun from functioning. Edited August 4, 2009 by Horsem4n Quote Link to post Share on other sites
lance201 Posted August 6, 2009 Report Share Posted August 6, 2009 Any news about the announced take down guide? And I I hve two questions at the owner of the A+K SVD, will this barrel fit: http://www.rsov.com/index.php?target=produ...product_id=3646 and will this POSP fit: http://cgi.ebay.de/ZIELFERNROHR-POSP-4x24-...id=p3286.c0.m14 I ordered another rifle case, mine was indeed a few mm to short!. Thx Lance Quote Link to post Share on other sites
Horsem4n Posted August 6, 2009 Author Report Share Posted August 6, 2009 i havent found time to write it. along with that, i have work as a professional graphic artist. as for the barrel, i dont know. last i checked, the PSG1 doesnt use a normal hop up cut. it may be the right length though. i would recommend contacting EdGi custom though. see if he ships to germany. Quote Link to post Share on other sites
DualWieldNate Posted August 10, 2009 Report Share Posted August 10, 2009 Hmmm ordered one of these from Airsoft World a week back and still nothing regarding it being posted out yet, can't wait to get my hands on it though. I'kll get to the point of my post, anybody know a good wood kit for these? Quote Link to post Share on other sites
Frakk2k Posted August 10, 2009 Report Share Posted August 10, 2009 Does this rifle take strong springs without having to rebuild trigger? What length is the inner barrel? Quote Link to post Share on other sites
Coldgunner Posted August 10, 2009 Report Share Posted August 10, 2009 Hmmm ordered one of these from Airsoft World a week back and still nothing regarding it being posted out yet, can't wait to get my hands on it though. I'kll get to the point of my post, anybody know a good wood kit for these? Being a clone of the AtoZ it should take that furniture... if you can find it. I was also under the impression it could take real steel furniture without modification. Quote Link to post Share on other sites
DualWieldNate Posted August 10, 2009 Report Share Posted August 10, 2009 Being a clone of the AtoZ it should take that furniture... if you can find it. I was also under the impression it could take real steel furniture without modification. Yeah I was thinking that, I'll have to have a word with Dmitry Quote Link to post Share on other sites
fallout Posted August 10, 2009 Report Share Posted August 10, 2009 i got mine last week and its a beast had a few plinks in garden and the range poos allover my g spec. had to go over every screw with my 1.5 allen key as most where lose but apart from that its a very good gun very long didnt measure the inner barrel tho. just waiting on my scope mounts then im all set for next game Quote Link to post Share on other sites
Horsem4n Posted August 10, 2009 Author Report Share Posted August 10, 2009 the spring is already rated 500 FPS. i would say it can handle stronger springs, but the sear is starting to mushroom lightly. no wear to the piston except for stripped finish. i pretty sure you cant add real steel furniture, but i haven't spent any time looking. im surprised i haven't measure the barrel either. Quote Link to post Share on other sites
magaz Posted August 10, 2009 Report Share Posted August 10, 2009 does the AK scope mount fit onto the rail, or is it just posp specific? Quote Link to post Share on other sites
fallout Posted August 10, 2009 Report Share Posted August 10, 2009 does the AK scope mount fit onto the rail, or is it just posp specific? as long as its an svd mount it will fit i orderd mine from ebay Quote Link to post Share on other sites
DualWieldNate Posted August 10, 2009 Report Share Posted August 10, 2009 as long as its an svd mount it will fit i orderd mine from ebay That is to say AK and SVD mounts ARE different. I bought a POSP for my 74 and it doesn't fit, thankfully I still have it and my SVD is en route. Quote Link to post Share on other sites
PlasticMag Posted August 11, 2009 Report Share Posted August 11, 2009 i pretty sure you cant add real steel furniture, but i haven't spent any time looking. im surprised i haven't measure the barrel either. Real furniture fits, but requires some mild modification. Quote Link to post Share on other sites
Horsem4n Posted August 11, 2009 Author Report Share Posted August 11, 2009 what kind of mild mods are we talking about? the real stock actually is affixed by 3 screws? Quote Link to post Share on other sites
DualWieldNate Posted August 11, 2009 Report Share Posted August 11, 2009 I second that dude, if any body can provide further info on how exactly you do this I'd be grateful. Quote Link to post Share on other sites
fallout Posted August 11, 2009 Report Share Posted August 11, 2009 That is to say AK and SVD mounts ARE different. I bought a POSP for my 74 and it doesn't fit, thankfully I still have it and my SVD is en route. my ics 74 mount didnt fit the posp scope i had but it sid after a few added bits of metal work to the mount the rail on the svd will defeantly fit the svd mount from the posp Quote Link to post Share on other sites
PlasticMag Posted August 11, 2009 Report Share Posted August 11, 2009 what kind of mild mods are we talking about? the real stock actually is affixed by 3 screws? No, the real stock is affixed by one screw, IIRC. You need to drill holes for the Atoz-spec mounting, but it doesn't affect functionality if you put it back on a real SVD. Quote Link to post Share on other sites
Horsem4n Posted August 12, 2009 Author Report Share Posted August 12, 2009 (edited) about the mounts, there are posp mounts for AK rails and mounts for SVD/SKS rails. there are posp scopes available for both types. i guess you could save money by getting an airsoft POSP and buying a mount conversion at a parts store. heres a super store for posp stuff. prices arent bad. http://www.kalinkaoptics.com/ and heres the AK mount you can replace the SVD mount with on a POSP scope http://www.kalinkaoptics.com/detail.aspx?ID=626 Edited August 12, 2009 by Horsem4n Quote Link to post Share on other sites
Coldgunner Posted August 12, 2009 Report Share Posted August 12, 2009 I'm gonna finally be able to skirmish mine at the weekend. Everything is still stock, does anyone have any out the box chrono readings? I would like to know what BB weight is best to use in it. Quote Link to post Share on other sites
Puding Posted August 12, 2009 Report Share Posted August 12, 2009 mine was shooting 445 to 450 out of the box with .20g Quote Link to post Share on other sites
DualWieldNate Posted August 13, 2009 Report Share Posted August 13, 2009 I'm gonna finally be able to skirmish mine at the weekend. Everything is still stock, does anyone have any out the box chrono readings? I would like to know what BB weight is best to use in it. Mine should be here today, I have .2s, .25s and .3s to test it with I'll post results tonight. Quote Link to post Share on other sites
fallout Posted August 13, 2009 Report Share Posted August 13, 2009 mine is 485 on .20s will be using .30s so they call there hits Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.