Panoptes Posted November 24, 2009 Report Share Posted November 24, 2009 I'm determined to get mine done this weekend. Quote Link to post Share on other sites
Wege Posted November 25, 2009 Report Share Posted November 25, 2009 Hello. This question is to stay within the (what seems to be) Generic MP7A1 GBB thread. Â The MP7A1 from Umarex/KWA in Germany is semi auto only, correct? IF so, does anyone know what is different (inside) from the Semi-only German one and the standard KWA/KSC versions (that have Fully Auto as selection)? Â We (in NZ ) are rather interested in it. Â Cheers Wege Quote Link to post Share on other sites
3vi1-D4n Posted November 25, 2009 Report Share Posted November 25, 2009 (edited) Hey Jono, Hold ya horses! Â You will see in a week when you are up in Auckland, be sure to drop by my place. Edited November 25, 2009 by 3vi1-D4n Quote Link to post Share on other sites
Maxwell94 Posted November 25, 2009 Report Share Posted November 25, 2009 i wanted to get a KWA MP7 at the ASGI yard sale but ha no cash Quote Link to post Share on other sites
jesTer Posted November 26, 2009 Report Share Posted November 26, 2009 (edited) Just curious if this is the same with everyone's gun. My KSC will only cock if I let the cocking handle snap back into place. It doesn't cock if I ride the handle into its slot. Â Finally got my Readyfighter white nozzle into my gun. It was a dropin fit (my gun is most likely from the first production batch). The replacement springs I got from RF appears to be the same as the stock ones, they aren't stiffer or anything. Just in case they might come undone from the nozzle (like the original ones), I added a dab of CA glue onto the grooves I cut so the spring will (hopefully) stay in place. Â Can't wait to torture test this thing. So far, I managed to finish ONE magazine with no problems for the FIRST time EVER... Edited November 26, 2009 by jesTer Quote Link to post Share on other sites
Kretschmer Posted November 26, 2009 Report Share Posted November 26, 2009 Just curious if this is the same with everyone's gun. My KSC will only cock if I let the cocking handle snap back into place. It doesn't cock if I ride the handle into its slot.  That´s the way your gun tells you something is not right, you cock it and no round is chambered. Real steel is the same Quote Link to post Share on other sites
galactica Posted November 26, 2009 Report Share Posted November 26, 2009 jesTer, check that you aren't having a bit of friction between the nozzle and part #34... Quote Link to post Share on other sites
Duckling Posted November 27, 2009 Report Share Posted November 27, 2009 Just curious if this is the same with everyone's gun. My KSC will only cock if I let the cocking handle snap back into place. It doesn't cock if I ride the handle into its slot. That is normal. If you ease the bolt forward, the second hammer lock don't disengage. Try press your finger on to the bolt and press forward. You will feel a small click, as the blot moves the last ½mm forward, and now the trigger will release the hammer.  Your gun always "Cock" the hammer as the bolt go to the rear, but if you ease the bolt forward the hammer is not released, before the bolt is all the way forward. The system is what makes the gun only fire on FullAuto as the next round is chambered. Securing that the gun always firers from a securely closed bolt position. Otherwise the hammer would just follow the bolt back up, as the bolt moves forward, slowing the hammer and causing the magazine to open the valve before the BB is completely chambered.  The same is clearly evident on the TMP/Mp9 model, and Glock 18 on FullAuto setting. Quote Link to post Share on other sites
aznriptide859 Posted November 27, 2009 Report Share Posted November 27, 2009 (edited) Got my KWA version in today - damn it's smexy. Didn't get a chance to fire it, but I will later today  Question - is KSC the only one that offers the 20rnd short mags? I want to get one just for holstering, but I can't see that KWA makes one. In any case all KWA MP7 mags are out of stock everywhere . Edited November 27, 2009 by aznriptide859 Quote Link to post Share on other sites
galactica Posted November 28, 2009 Report Share Posted November 28, 2009 yeah only KSC sell the 20 rounders. Quote Link to post Share on other sites
Panoptes Posted November 28, 2009 Report Share Posted November 28, 2009 (edited) Just doing mine now - anyone know where those nozzle strip/assembly pics went? Â Edit: Found them but what's the Large screw at the back for? http://www.arniesairsoft.co.uk/forums/inde...ghter&st=20 ... . Edited November 28, 2009 by Panoptes Quote Link to post Share on other sites
aznriptide859 Posted November 29, 2009 Report Share Posted November 29, 2009 Question - anyone else gotten a bolt catch failure? It just randomly happened to me during review writing (i.e. it was working well earlier in the day), and it seems mag placement in the magwell is getting harder and harder. Both the nub on the mag and the lever in the gun neither seemed worn, so maybe it's bent the wrong way? I'm seriously confused Quote Link to post Share on other sites
Panoptes Posted November 29, 2009 Report Share Posted November 29, 2009 Apparently it's very likely to happen if you dry fire. Â Â Quote Link to post Share on other sites
infected Posted November 29, 2009 Report Share Posted November 29, 2009 What are you guys using for mag pouches? The mag seem to be a bit of an awkward size. Quote Link to post Share on other sites
Panoptes Posted November 29, 2009 Report Share Posted November 29, 2009 I've an MP5 leg-drop. Tight fit but just about does the job. Â Â Quote Link to post Share on other sites
thinh Posted November 29, 2009 Report Share Posted November 29, 2009 (edited) Question - anyone else gotten a bolt catch failure? It just randomly happened to me during review writing (i.e. it was working well earlier in the day), and it seems mag placement in the magwell is getting harder and harder. Both the nub on the mag and the lever in the gun neither seemed worn, so maybe it's bent the wrong way? I'm seriously confused   Found this at the KWA forums.  http://www.kwausa.com/forums/index.php?showtopic=1658 Edited November 29, 2009 by thinh Quote Link to post Share on other sites
greg Posted November 29, 2009 Report Share Posted November 29, 2009 What are you guys using for mag pouches? The mag seem to be a bit of an awkward size. Mp5 for me, fit is good, but the lip on the mag sometimes gets a little hung up on the way in. Â Â Greg. Quote Link to post Share on other sites
greg Posted November 29, 2009 Report Share Posted November 29, 2009 Just doing mine now - anyone know where those nozzle strip/assembly pics went? Edit: Found them but what's the Large screw at the back for? http://www.arniesairsoft.co.uk/forums/inde...ghter&st=20 ... . Probably a little late now, but the screw is for the cup, so you don't need to touch it for the nozzle change.   Greg. Quote Link to post Share on other sites
galactica Posted November 29, 2009 Report Share Posted November 29, 2009 What are you guys using for mag pouches? The mag seem to be a bit of an awkward size. Â Bulle triple dual MP5 pouches. Perfect fit for single MP7s. Quote Link to post Share on other sites
Kretschmer Posted November 29, 2009 Report Share Posted November 29, 2009 (edited) What are you guys using for mag pouches? The mag seem to be a bit of an awkward size. The same mag pouches I use for everything:  Those fit TM sopmod m4 mags, AK mags, mp5/mp7 long mags on the back and pistol mags or mp5/mp7 shorts on the front. That´s my all-rounder rig.  A small problem I had with some 5 KWA mags yesterday. They came really dirty and non-lubricated from factory, so I had A LOT of misfeeds while playing due to the magazine followers getting stuck. Now the problem is completely gone with some careful cleaning and silicone oil spraying, but half the *suitcase* they carried contaminated the bbs and went on to the hop and inner barrel and that can really be a problem. Clean your new mags before skirmishing, it´s really worth it. Even with that problem, it´s a really accurate and satisfying gun. Love to get the mag out in a hurry, have a look at how much of it its left and then appraise the need for mag changing, as you would with a real steel mag. Edited November 29, 2009 by Kretschmer Quote Link to post Share on other sites
Duckling Posted November 29, 2009 Report Share Posted November 29, 2009 The same mag pouches I use for everything: Same for me, I use Emdom 2xPMag pouch, they easy hold 2x M4 magazines (or 2x AUG magazines in my chase), and they'l hold 2 Mp7 40 rounders, nice and snug, and holds just one magazine in place. Quote Link to post Share on other sites
infected Posted November 29, 2009 Report Share Posted November 29, 2009 I guess I should have been more specific... what pouch would you use for short mags? Quote Link to post Share on other sites
Kretschmer Posted November 29, 2009 Report Share Posted November 29, 2009 Separate pistol pouches, single m4 pouches to fit two or double m4 for three. Put the baseplate upwards and it´ll help a lot with quick drawing. Quote Link to post Share on other sites
aznriptide859 Posted November 29, 2009 Report Share Posted November 29, 2009 (edited) Apparently it's very likely to happen if you dry fire. Â ######. I looked at the thread thinh provided, would sanding down the BB follower fix this? Â Edit: It does work. Make sure you ONLY sand down a LITTLE bit of the nub that allizard speaks of in the thread (http://www.kwausa.com/forums/index.php?showtopic=1658) and it should fix your issue. Edited November 29, 2009 by aznriptide859 Quote Link to post Share on other sites
greg Posted November 30, 2009 Report Share Posted November 30, 2009 I guess I should have been more specific... what pouch would you use for short mags? Oo. Um, I'm not really using the short mag. Â I just checked & it does fit both my Kings arms & viper pistol mag pouches, a bit short but ok. Â Won't go in a cqc, too fat. Â Â Greg. Â Â Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.