Shadow_Ocelot Posted September 20, 2010 Report Share Posted September 20, 2010 (edited) So the only way I could get an ASAP to work is to remill it to take RS buffers? Edited September 20, 2010 by Shadow_Ocelot Quote Link to post Share on other sites
Raven1 Posted September 20, 2010 Report Share Posted September 20, 2010 So the only way I could get an ASAP to work is to remill it to take RS buffers? Â Correct,,, Quote Link to post Share on other sites
weekenny Posted September 20, 2010 Report Share Posted September 20, 2010 Raven did you have to modify your CA readi-mag?? Quote Link to post Share on other sites
Andrew12 Posted September 21, 2010 Report Share Posted September 21, 2010 Correct,,, Â Will be doing this mod with Raven 1 very soon Folks! Â Also have the new cradle hopup arm in my hands right now, will evaluate this weekend at a mid size op and report back. Looks promising so far. Quote Link to post Share on other sites
Andrew12 Posted September 21, 2010 Report Share Posted September 21, 2010 can't edit for some reason  Report:  Beta users might need to file down some of the new hop arm from T_Hum as it's a few microns too wide in some spots. Other than that its a great fit. Offers much more hop than the standard arm or a modified arm.  Also,  T_Hum machined down a VSR10 6.01mm barrel for me. I have yet to fire it but what I can report back on is the tighter fitting of the shroud assembly that covers the bucking and barrel, as well as the brass ring, it's much MUCH tighter with the new barrel. This is due to about a .10mm difference in diameter Quote Link to post Share on other sites
jotohomomoto Posted September 21, 2010 Report Share Posted September 21, 2010 you guys might be interested in this.... http://shop.ehobbyasia.com/magazines/rifle-smg-magazine/for-gbbr/kj-works-30rd-magazine-for-m4a1-gbb.html Quote Link to post Share on other sites
senators2904 Posted September 21, 2010 Report Share Posted September 21, 2010 No, Ill be selling it. Just wished I knew the real problem behind the need for a solution is all. Â The arms will be tested by the beta testers this week. After which theyll go into production. Likely laser cut steel. Price TBD. man you have no idea how happy i am to hear that you'll be selling a fix to the hop-up issue. i just want a more consistent shot pattern. Quote Link to post Share on other sites
t_hum Posted September 21, 2010 Report Share Posted September 21, 2010 can't edit for some reason  Report:  Beta users might need to file down some of the new hop arm from T_Hum as it's a few microns too wide in some spots. Other than that its a great fit. Offers much more hop than the standard arm or a modified arm.  Also,  T_Hum machined down a VSR10 6.01mm barrel for me. I have yet to fire it but what I can report back on is the tighter fitting of the shroud assembly that covers the bucking and barrel, as well as the brass ring, it's much MUCH tighter with the new barrel. This is due to about a .10mm difference in diameter  Yeah, the betas are probably a tiny bit tight in newer guns. Had to use .125" stock as its what I had on hand rather than 3mm. The real units will be slightly thinner so no mods are necessary. Quote Link to post Share on other sites
Reppyboyo Posted September 21, 2010 Report Share Posted September 21, 2010 So which reputable retailers (hk) have these in stock? Most appear to be out of stock of the rifle`s apart from ehobbyasia (whom I ive had bad experiences with, plus they are more expensive than other). Quote Link to post Share on other sites
weekenny Posted September 21, 2010 Report Share Posted September 21, 2010 Airsoft Global has the CQB in stock. Quote Link to post Share on other sites
ahadsz Posted September 21, 2010 Report Share Posted September 21, 2010 (edited) Just got my KJW m4 cqb-r with 7 magazines (not including the one I got), and wow am I impressed to bad I cant use it in the winter. And man this gun is great, awesome recoil and as so far I have shot at least 14 mags practice shooting and its fun and shoots really really far! Â Picture of the gun with my friend's gbbr pistol (not sure what one) and picture of 2 of my mags, I have not open the other 5, just been firing with the 2 I opened. Edited September 21, 2010 by ahadsz Quote Link to post Share on other sites
t_hum Posted September 21, 2010 Report Share Posted September 21, 2010 (edited) and wow am I impressed to bad I cant use it in the winter. Â Why cant you use it in the winter? Several guys here use them is near freezing temps with decent results. Sure, recoil is less than awesome but the gun still shoots and does so well. Â The bolt carrier I made from the plastic is extremely robust. It has an absurd recoil at the temperatures Im shooting it at due to its very light weight. The production version will be made from 7075 aluminum and is lighter than the stock carrier. Maybe for winter use it would be a good option... Edited September 21, 2010 by t_hum Quote Link to post Share on other sites
Shadow_Ocelot Posted September 21, 2010 Report Share Posted September 21, 2010 Is it just a strange reflection, or are there trademarks on your gun, Ahadsz? Quote Link to post Share on other sites
Andrew12 Posted September 22, 2010 Report Share Posted September 22, 2010 man you have no idea how happy i am to hear that you'll be selling a fix to the hop-up issue. i just want a more consistent shot pattern. Â Although I was not experiencing enough hop, I was still getting very tight groupings on a stock system with unregulated FPS. Clean your barrel and bucking, and if you are using green gas, STOP. Quote Link to post Share on other sites
Roman! Posted September 22, 2010 Report Share Posted September 22, 2010 I could easily see my KJW as being all "t_hum" inside LOL! I cannot wait to hear how the hop up unit is doing along with the bolt carrier. Sitting on go right now as soon as the beta testing is done. Quote Link to post Share on other sites
johnyew Posted September 22, 2010 Report Share Posted September 22, 2010 (edited) Although I was not experiencing enough hop, I was still getting very tight groupings on a stock system with unregulated FPS. Clean your barrel and bucking, and if you are using green gas, STOP. Â Andrew, I'm interested in knowing your thoughts for not using green gas. Thanks. Edited September 22, 2010 by johnyew Quote Link to post Share on other sites
weekenny Posted September 22, 2010 Report Share Posted September 22, 2010 I'd hazard a guess that its to do with the amount of silicon in some brands of Green Gas this could be the cause of the hop issues in some cases. Quote Link to post Share on other sites
ahadsz Posted September 22, 2010 Report Share Posted September 22, 2010 (edited) nope just reflection! I dunno why it looks like it has them but its the curve light above, no time to explain lol. And I cant my temps go to about lets say 20 f lol! which is like -12 c lol, but I usually play in the winter around 40 f which is like 8 c. Edited September 22, 2010 by ahadsz Quote Link to post Share on other sites
WÅ‚adek Posted September 22, 2010 Report Share Posted September 22, 2010 I have check my M4 and my friend's m4 (in his m4 the hop up works good) I test the my barrel with hop upl in his upper receiver and his barrel with hop up in my upper receiver. I see thats not a problem with this part which push the hop up to hopping. The problem is in my hop up gum. Now i looking what is wrong, becase for first looking, it looks good but not "hopping" good Quote Link to post Share on other sites
airsplat2 Posted September 22, 2010 Report Share Posted September 22, 2010 (edited) Just for any of thosestill curious about sourcing these, We do have the standard KJW M4A1 GBBR in stock, as well as the KJW CQB version. Ships fine overseas to the UK. Edited September 22, 2010 by airsplat2 Quote Link to post Share on other sites
senators2904 Posted September 25, 2010 Report Share Posted September 25, 2010 (edited) hey folks quick question for you. as of late whenever i fire my rifle in full auto i get about 3 or 4 shots off before it just stops working. i have to pull back on the charging handle to get it going before it does the same thing all over. it doesnt chamber the last round before it stopped firing and it acts as if theres no gas in the mag at all. i broke it down to see if there were any problems and i cant find anything that would cause that problem. im lead to believe that its the magazine but i drop some lube in them and to no avail... ontop of that ive noticed that its not as efficient on gas as it used to be. i went from almost 3 mags of bbs to 1 1/2 per fill of gas. now this didnt happen until i had to replace my floating valve assembly. but i dont think it would hinder my full auto functionality. also more often ive noticed that my bolt lock function doesnt work as often. Edited September 25, 2010 by senators2904 Quote Link to post Share on other sites
t_hum Posted September 25, 2010 Report Share Posted September 25, 2010 Does your mag valve move freely and snap back quickly? Quote Link to post Share on other sites
nickthebrick65 Posted September 26, 2010 Report Share Posted September 26, 2010 Ran into my first problem today. When using my weapon it wouldn't cycle after I ran about 20 mags through it today. What happens is I drop the hammer by pulling the charging handle, and it goes back like it should. However, it will only fire when I ATTEMPT to put it into safe and then back to semi. When cocked, the gun will not go into auto or safe, only semi. I will take a video later to better show what I mean. Basically the hammer stays back, but the trigger won't release the hammer unless I try to put it into safe then back to semi. Any help would be very appreciated. Quote Link to post Share on other sites
sacairsoftsn00py Posted September 26, 2010 Report Share Posted September 26, 2010 I'm thinking one of the sears catches and wont release the hammer...busted sear possibly. Â Have you been running propane/green gas? Quote Link to post Share on other sites
nickthebrick65 Posted September 26, 2010 Report Share Posted September 26, 2010 Yes sir I have Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.