DesertFox Posted January 28, 2011 Report Share Posted January 28, 2011 eHobbyAsia has ASAPs on some of their custom KJW M4s. I've tried emailing them to ask how they did it, but they never returned my emails. I was going to attempt to mod an ASAP to fit the KJW, but my other two have UBRs and the one I was going to do it to was traded to you . I may tackle that project again if I get another KJW M4 in the future. Quote Link to post Share on other sites
senators2904 Posted January 28, 2011 Report Share Posted January 28, 2011 hey folks its been a long time since ive last posted anything. sorry for the lack of contact if it matters really. i was just wondering if T-Hum got that hop-up unit for sale yet, or if hes still working on it. Quote Link to post Share on other sites
Raven1 Posted January 31, 2011 Report Share Posted January 31, 2011 Apologies All, Â Answered All PMs and am available to help anyone who has inquiry... Â -Raven1 Quote Link to post Share on other sites
DRAGON64 Posted January 31, 2011 Report Share Posted January 31, 2011 Apologies All, Â Answered All PMs and am available to help anyone who has inquiry... Â -Raven1 Â Â Welcome back! Quote Link to post Share on other sites
slipknot1971 Posted February 1, 2011 Report Share Posted February 1, 2011 Apologies All, Â Answered All PMs and am available to help anyone who has inquiry... Â -Raven1 Â Â welcome back!!!...i have one...how exactly can i do the rapid fix on the rubber belt ? Â thanks in advance. Quote Link to post Share on other sites
t_hum Posted February 1, 2011 Report Share Posted February 1, 2011 I sell replacement belts but being in Panama, might be tough to get to you. Quote Link to post Share on other sites
Roman! Posted February 1, 2011 Report Share Posted February 1, 2011 Apologies All, Â Answered All PMs and am available to help anyone who has inquiry... Â -Raven1 Â Welcome back Raven! You are the man that started my KJW addiction Quote Link to post Share on other sites
frogfish Posted February 1, 2011 Report Share Posted February 1, 2011 Got my KJW M4 in (got it used) Took it outside in 33F and shot through more than 30 rounds in a cold mag, as this is the coldest temp I would ever play in I am quite impressed, my G&P would be doing very little in the same temps. Â I'll get pics up when I get my parts in and installed. Quote Link to post Share on other sites
slipknot1971 Posted February 2, 2011 Report Share Posted February 2, 2011 I sell replacement belts but being in Panama, might be tough to get to you. Â Thanks Travis i know, and it's good to know you can help...i will contact my internet shopping center to find out how can we do it...meanwhile...i managed to cut a motorcycle 24'' tire tube with the same width of the belt only a centimeter long shorter ...and it's WORKING!....i'll do serious fire test this weekend to see how the stress on the rubber affects it....and...just as shooting info, my tanio was firing 455 fps with .28's @ 32 or 33 degrees Celsious on sunday....maybe that was the reason why it got torn appart.... Quote Link to post Share on other sites
Raven1 Posted February 2, 2011 Report Share Posted February 2, 2011 welcome back!!!...i have one...how exactly can i do the rapid fix on the rubber belt ? Â thanks in advance. Â The belt is Nylon and provides tension on both sides of the charging handle to the upper receiver where it contacts. Â The Nylon belt serves 2 functions, Â To take provide tension AND a slick Lubricated like surface for the charging handle/Bolt Carrier Group Assembly to smoothly & freely move front to back. To provide a mechanism to smoothly engage the Bolt Cup moving back to its 'Home Position' fully collapsed on the Carrier, the spring fully seating the Bolt Cup. Â Guys, when opening and separating the upper receiver from the lower receiver make sure the Nylon Band is NOT Catching and the BCG slides easily in/out in the upper receiver First BEFORE mating to the lower receiver. This is typically how the band gets damaged and eventually snaps, due to rough handling of how the BCG is placed into the upper receiver or it catching slightly when the 2 halves are shut... Â Hope This Helps 1 Quote Link to post Share on other sites
slipknot1971 Posted February 4, 2011 Report Share Posted February 4, 2011 The belt is Nylon and provides tension on both sides of the charging handle to the upper receiver where it contacts.  The Nylon belt serves 2 functions,  To take provide tension AND a slick Lubricated like surface for the charging handle/Bolt Carrier Group Assembly to smoothly & freely move front to back. To provide a mechanism to smoothly engage the Bolt Cup moving back to its 'Home Position' fully collapsed on the Carrier, the spring fully seating the Bolt Cup.  Guys, when opening and separating the upper receiver from the lower receiver make sure the Nylon Band is NOT Catching and the BCG slides easily in/out in the upper receiver First BEFORE mating to the lower receiver. This is typically how the band gets damaged and eventually snaps, due to rough handling of how the BCG is placed into the upper receiver or it catching slightly when the 2 halves are shut...  Hope This Helps  Thanks raven...awesome info to know about. Quote Link to post Share on other sites
ghostnote Posted February 8, 2011 Report Share Posted February 8, 2011 Does anyone know why the stock inner barrel stops 4 inches short of the outer barrel? Not too much of a big deal since I'm waiting on a custom barrel from t_hum (its been a while though.sadface) Quote Link to post Share on other sites
t_hum Posted February 8, 2011 Report Share Posted February 8, 2011 Every remaining pending order shipped today so it should be there soon. Quote Link to post Share on other sites
brainexploder Posted February 8, 2011 Report Share Posted February 8, 2011 I dont think it makes any sense my guess is so they can use the same inner for the standard and cqb versions, seems like a waste. Quote Link to post Share on other sites
sandstorm Posted February 8, 2011 Report Share Posted February 8, 2011 (edited) Would seem like a waste if they made them with tightbore in Japan and got all their work confiscated and themselves jailed for breaking power laws, too, neh? Â Remember, not everyone lives without limits, and for some, the consequences for over-powered airsoft aren't limited to their friends emptying high-capacity magazines from said gun to their nethers. Edited February 8, 2011 by sandstorm Quote Link to post Share on other sites
brainexploder Posted February 8, 2011 Report Share Posted February 8, 2011 Gun shoots 470 stock on gg and around 380? on duster, still too hot for most foreign lands. USA! Quote Link to post Share on other sites
def3kt Posted February 8, 2011 Report Share Posted February 8, 2011 (edited) But in Canada your gun HAS to shoot >430 by law to be allowed for import.. Super sweet Edited February 8, 2011 by def3kt Quote Link to post Share on other sites
GingaNinga Posted February 9, 2011 Report Share Posted February 9, 2011 They are a tight fit, but I have used them in ACM version 3. They are fine vertical or inverted. Quote Link to post Share on other sites
frogfish Posted February 9, 2011 Report Share Posted February 9, 2011 I went with Blade tech molded pouches. Fit is perfect. Quote Link to post Share on other sites
DesertFox Posted February 10, 2011 Report Share Posted February 10, 2011 I run FASTMAGs (not ACM) with thermolds and they fit perfectly. Maybe the ACM ones are molded differently? Quote Link to post Share on other sites
GingaNinga Posted February 11, 2011 Report Share Posted February 11, 2011 DesertFox, I haven't ever had problems, they just fit tighter than an TM M4 mag. Love the FastMag set-up though. Quote Link to post Share on other sites
elanaiba Posted February 14, 2011 Report Share Posted February 14, 2011 Need more Pmag goodness from T_hum Quote Link to post Share on other sites
Eh_Well Posted February 15, 2011 Report Share Posted February 15, 2011 We can't start production until we can get a model that will be for US and international sale. Â PMAGS will come after STANAGS as far as we can tell at this point. I would rather not go into too many details here but rest assured, mags ARE coming. Â I sure hope so... I am literally waiting for the announcement of your mag's release date to purchase a KJW M4. I will then proceed to purchase 8 of your magazines Quote Link to post Share on other sites
frogfish Posted February 15, 2011 Report Share Posted February 15, 2011 Same here not purchasing more mags until I can get STANAGS or PMAGs Quote Link to post Share on other sites
def3kt Posted February 15, 2011 Report Share Posted February 15, 2011 Stanags. Please please please please. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.