Theme57 Posted September 10, 2012 Report Share Posted September 10, 2012 Thank you that was very helpful. I'm really new to the world of M4s if you can't already tell, haha. Would you be able to link me to the stock you recommend by any chance? I'm not entirely sure what you mean by that. Cheers, Lycan PM me if you need anymore info, I consider myself knowlegdable enough about the AR platform to help. As far as costs go, you could litterally make your stock have little to no wobble if you put electical tape on the stock tube. SInce your looking at Magpul stuff I assume you want magpul and heres what my recommendation would be. http://shop.ehobbyasia.com/magpul-pts-moe-stock-black.html You still get the magpul look, but its cheaper then the CTR. Quote Link to post Share on other sites
xxlycan Posted September 10, 2012 Report Share Posted September 10, 2012 PM me if you need anymore info, I consider myself knowlegdable enough about the AR platform to help. As far as costs go, you could litterally make your stock have little to no wobble if you put electical tape on the stock tube. SInce your looking at Magpul stuff I assume you want magpul and heres what my recommendation would be. http://shop.ehobbyasia.com/magpul-pts-moe-stock-black.html You still get the magpul look, but its cheaper then the CTR. Alright I'll look into it. Thanks again for all of the help, I really appreciate it. Quote Link to post Share on other sites
Rob15 Posted September 11, 2012 Report Share Posted September 11, 2012 Again.... Just a reminder to everyone, if you want to sell your guns or kit then you must post them for sale in the proper classifieds section and not in this thread, I have removed a number of posts attempting to sell, warns will be issued for any attempts to sell and anyone who has already attempted it and tries again will face a suspension or be banned as per the forum rules. In order to access to the sales sections of the forums, 100 posts is required. At this point your member status should change from 'Member' to 'Regular Poster'. If your post count reads 100 posts or higher and you do not have access, try to post in a section of the site where your post count increases - please remember that not all areas of the site (such as off-topic) contribute towards your 'official' post count. Selling via forum status updates, general 'please buy' adverts in the non-sale sections of the forum or attempting to sell via pm are considered intentional evasion of the 100 post rule and most likely will result in a warning / and or suspension from the forum. Repeat offenders will be banned. http://www.arniesairsoft.co.uk/forums/index.php?/topic/386-general-rules-and-guidelines/ Quote Link to post Share on other sites
delarosa Posted September 17, 2012 Report Share Posted September 17, 2012 Got to test my kjw after a long time now. - Big change is in the inner barrel, used 6.01 ported barrel before, results was bad, bbs flying all sorts of direction. Changed mine to 6.03 and all bbs going dead centre with no issue whatsoever (hop was off). Fps on 6.03 was 450 and distance to target of approx 12-15 meters - Still need to test the TDC though as I forgot that part (too excited bout the barrel) Any pics of the new hop? Would want to try that too incase my upper receiver not holding out well in the future, any solution to the back pin tab broken thing will make my day though Quote Link to post Share on other sites
weekenny Posted September 20, 2012 Report Share Posted September 20, 2012 New hop sounds to me like he just got lucky with part tolerances. Heard of working hops out the box before. Quote Link to post Share on other sites
Landa Posted September 22, 2012 Report Share Posted September 22, 2012 Mine works great out of the box, after cleaning the bucking, i can over hop 0.28s with the wheel on the 7th position Quote Link to post Share on other sites
DRAGON64 Posted September 24, 2012 Report Share Posted September 24, 2012 I love the KJW M4 (do not own one anymore), and I always loved the gif KJW userbar that has been used for years. At another forum there was a member offering to make some cool userbars for use in forum signatures, so I had him create me a new KJW M4 "RELIABILITY INSIDE" userbar. So if you are a KJW M4 fan and wanted a first or second userbar to add to your signature, then "here's your sign..." Note that "Pillsbury" at the Airsoft Sniper Forum is the creator of the design. Quote Link to post Share on other sites
JT SANBORN Posted September 24, 2012 Report Share Posted September 24, 2012 I can't find where to post this. Anyway I'm willing to trade my KJ V2 Bolt set for a V1 Bolt set. Pm me if you're interested. Quote Link to post Share on other sites
Theme57 Posted September 24, 2012 Report Share Posted September 24, 2012 I love the KJW M4 (do not own one anymore), and I always loved the gif KJW userbar that has been used for years. At another forum there was a member offering to make some cool userbars for use in forum signatures, so I had him create me a new KJW M4 "RELIABILITY INSIDE" userbar. So if you are a KJW M4 fan and wanted a first or second userbar to add to your signature, then "here's your sign..." Note that "Pillsbury" at the Airsoft Sniper Forum is the creator of the design. Nice post man I personally prefer the current gif. IMO this one has an almost video game BF3 COD and etc. feel to it but good nonetheless Quote Link to post Share on other sites
Landa Posted September 24, 2012 Report Share Posted September 24, 2012 I can't find where to post this. Anyway I'm willing to trade my KJ V2 Bolt set for a V1 Bolt set. Pm me if you're interested. we are all in that position man.. i have been trying to source a V1 for months now, no luck. Quote Link to post Share on other sites
JT SANBORN Posted September 24, 2012 Report Share Posted September 24, 2012 I'm going to contact KJW directly tonight to see if they have any in stock. Quote Link to post Share on other sites
t_hum Posted September 24, 2012 Report Share Posted September 24, 2012 (edited) A heads up to the community here: Our new website will be live in a few days (Wed-Fri). Im just finalizing some shipping configuration stuff. Site will be reachable through our regular web address (www.cradleairsoft.com) Among the items on the site will be the new bolt carrier though the stock levels will still say "out of stock" for another few weeks. The carriers are in production over here so we are entering the phase where we are waiting for anodize and packaging to take place. Details as to pricing and what comes with each kit will be completely viewable, of course. T Edited September 24, 2012 by t_hum 1 Quote Link to post Share on other sites
Landa Posted September 24, 2012 Report Share Posted September 24, 2012 You just made my day man! how exciting! aftermarket BCG's for out KJ's Quote Link to post Share on other sites
weekenny Posted September 24, 2012 Report Share Posted September 24, 2012 Nice one T. Might pick one up as a spare, will you be doing the reinforced bands separately? Quote Link to post Share on other sites
t_hum Posted September 24, 2012 Report Share Posted September 24, 2012 The complete kit comes with a band, the upgrade does not. However, they will be available for purchase separately. Quote Link to post Share on other sites
freon Posted September 25, 2012 Report Share Posted September 25, 2012 Will definitely pick one up. I have a US address that you can ship to. T, will you guys also be making any reinforced charging handles soon? Among my teammates, I'm noticing that the stock KJ charging handles break after a while. Some break sooner than later. We've noticed that the charging handles are made of cast... uh... what appears to be pot metal, don't know if it can be called iron. But yeah, low durability. It'd be awesome to have one that lasts a bit longer. Quote Link to post Share on other sites
JT SANBORN Posted September 25, 2012 Report Share Posted September 25, 2012 I guess I will wait for yours T. Quote Link to post Share on other sites
Number5 Posted September 25, 2012 Report Share Posted September 25, 2012 T-hum, run a pre-order and take my cash! Excellent work though, i was getting worried that these wouldn't show! look forward to viewing the new site aswell! Quote Link to post Share on other sites
t_hum Posted September 25, 2012 Report Share Posted September 25, 2012 We wont be taking pre-orders this time around. We considered it but it'll be easier on us to keep track of everything the regular way. What we will have though is a way to sign up on the bolt carrier's product page to receive a notification when they are up for sale. So everyone should get a notification that signs up. 2 Quote Link to post Share on other sites
slipknot1971 Posted September 27, 2012 Report Share Posted September 27, 2012 We wont be taking pre-orders this time around. We considered it but it'll be easier on us to keep track of everything the regular way. What we will have though is a way to sign up on the bolt carrier's product page to receive a notification when they are up for sale. So everyone should get a notification that signs up. Hello travis, good news...and when it is going to be the site up with the items? Quote Link to post Share on other sites
weekenny Posted September 27, 2012 Report Share Posted September 27, 2012 My two KJW GBBR's in there "final" *cough* current configs. Quote Link to post Share on other sites
Leshy Posted September 28, 2012 Report Share Posted September 28, 2012 Is that the new cradle bcg in your m4, Kenny? Quote Link to post Share on other sites
weekenny Posted September 28, 2012 Report Share Posted September 28, 2012 No it's the result of boredom an silver spray paint. As is the stock tube on the other one. Quote Link to post Share on other sites
Landa Posted September 28, 2012 Report Share Posted September 28, 2012 DAT MUZZLE BRAKE! looks like those 50 cal AR15's And nice finnish on the BCG! I attempted to polish mine, lol Did 120 gird and then 220; here are the results: Quote Link to post Share on other sites
t_hum Posted September 28, 2012 Report Share Posted September 28, 2012 Hello travis, good news...and when it is going to be the site up with the items? Very very soon. Im just wrapping up testing a few payment gateway items. Thought Id be done yesterday but had a few bugs to resolve. 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.