Hut73 Posted June 10, 2013 Report Share Posted June 10, 2013 Is the first shot from each mag low? Quote Link to post Share on other sites
Kireru Posted June 10, 2013 Report Share Posted June 10, 2013 (edited) Its random... First round i played i took 3-4 shots to see how the hop-up was set... perfect flight. We go out side, its about 16C/62F to 20C/68F+.We run around some, spot each other and then when i fire....straight drops. Thats atleast 10 min after my Hop-up shots. When emptying my mags, the drops were so random that i really cant tell what does it. Only thing i noticed was my rifle did sound different at times, like gas efficiency was a variable. I didnt do a control check and shoot each mag 3-4 times to determine if it was the mags not giving out enough gas, but some mags could shoot straight down and then the final shots would fly straight. Edited June 10, 2013 by Kireru Quote Link to post Share on other sites
Erebus Posted June 11, 2013 Report Share Posted June 11, 2013 What hop-up rubber are you using?My hop sucked with the Falcon rubber and Falcon 6.03 TB.I have the TDC too, but since getting some new KJW Part#20 buckings, all my woes have gone away and left on my face an upward crack. Quote Link to post Share on other sites
t_hum Posted June 12, 2013 Report Share Posted June 12, 2013 (edited) Havent posted back in here for a while now. Quick update about orders and ordering from the Cradle Website. Some people may have had some delays over the past month or so in having their packages ship. We were just too far behind getting parts machined, anodized, assembled, etc. The backlog is behind us now and we have a new team member dedicated EXCLUSIVELY to filling orders. So most orders are shipping out same day, with worst case being 24 hours. (Excluding most weekends and holidays, naturally).  So, thanks for sticking with us through the rough moments!  Also, looking to start stocking spare bolt cup assemblies for V1/V1+ rifles. I suppose if demand is there we can look at doing rubbers too. Either stocking the KJW part #20 or doing our own. Ive got a great shop that does fantastic rubber parts we can speak with if you guys express interest.  Cheers, T  BTW, any of you who have interest in AEG related items, youll want to keep your eyes firmly planted on our website and/or the news page in the coming weeks. We've got some doozies.... Edited June 12, 2013 by t_hum Quote Link to post Share on other sites
Theme57 Posted June 12, 2013 Report Share Posted June 12, 2013 Hey everyone. For those of you looking to buy A KJW M4 V1 or just want another. I am selling mine with some extra's. Here is the ebay link: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=161043658614&ssPageName=ADME:X:AAQ:US:1123 Quote Link to post Share on other sites
Erebus Posted June 12, 2013 Report Share Posted June 12, 2013 @t_humPlease, either make or stock Part#20's! Just don't make them like the RA-Tech or Falcons, bleh.Personally, I think it would be just another way for you to lock down the US KJW M4 market. Not to mention making it so much more convenient than ordering overseas.Maybe also get back into selling tight bore barrels, and maybe making outer barrels that are compatible with the KJW platform? Hmm, getting your hands on anything to do with the KJW M4 ought to do it. Ha ha, don't mean to bust your chops. Quote Link to post Share on other sites
Kai_Wolf Posted June 13, 2013 Report Share Posted June 13, 2013 Do the #20 parts come with all V2 rifles or is this a new thing? Â I assume ti fixes all the previous hop up issues? Quote Link to post Share on other sites
Landa Posted June 13, 2013 Report Share Posted June 13, 2013 Part 20 is the bucking. 1 Quote Link to post Share on other sites
Kai_Wolf Posted June 14, 2013 Report Share Posted June 14, 2013 I figured it was the bucking, but does it differ from what was in the KJW's before? Â Quote Link to post Share on other sites
Erebus Posted June 14, 2013 Report Share Posted June 14, 2013 No, it's the stock bucking. RA-Tech and Falcon have their "idea" of what's it's suppose to be though.RA and Falcon have completely redesigned the Part #20 rubber, but not in a good way. Oversized hop nub and it's in the wrong place on the rubber.Going back to the Part#20 from using a Falcon hop rubber solved A LOT of my hop issues. I mainly run semi auto anyways, so she definitely has the [potential] for a gas M4 DMR, but I have yet to battle test her since solving my hop issue.Which I may be going to a CQ game today in Kalamazoo, so we may just find out.Michigan area players:http://kalamazooairsoft.com/ Quote Link to post Share on other sites
Shabby Posted June 14, 2013 Report Share Posted June 14, 2013 Really? I just purchased a falcon bucking and tightbore. Raven had mentioned liking the falcon bucking which is why I went with it. I'll try it out and see if I have the same issues. Quote Link to post Share on other sites
DonDims Posted June 14, 2013 Report Share Posted June 14, 2013 I'm running the falcon rubber and it works nice in my gun on the stock barrel. My stock bucking gave me really inconsistent hop. The falcon rubber were really bad when I paired it with my madbull tight bore barrel but somehow it runs perfect on my stock barel Quote Link to post Share on other sites
Erebus Posted June 14, 2013 Report Share Posted June 14, 2013 (edited) Oh yeah, they work. Never said they didn't. Just with my own experience, Falcon turned out to be a bunk hop rubber. I wished I hadn't ordered eight of them.I'm running a Falcon TB also, but [my] results are wayyyy much better without the Falcon rubber. I'm not knocking anyone using these, just saying I personally hate the Falcon hop rubber based on the results I got. Edited June 14, 2013 by Erebus Quote Link to post Share on other sites
Erebus Posted June 22, 2013 Report Share Posted June 22, 2013 Would like to thank Hut73 for looking out for fellow stateside KJW users. Much thanks! Quote Link to post Share on other sites
Hut73 Posted July 10, 2013 Report Share Posted July 10, 2013 Wow, I'm glad I have something to post, if for nothing more than the keep this thread relevant!  Just wanted to give you guys a heads up that we've created a KJW M4 GBBR users group on Facebook. You can find us here:  https://www.facebook.com/groups/417522821679240/  Please feel free to stop on by and become a member! Quote Link to post Share on other sites
Raketen Posted July 23, 2013 Report Share Posted July 23, 2013 can you add me? Quote Link to post Share on other sites
Hut73 Posted July 23, 2013 Report Share Posted July 23, 2013 can you add me? Have you requested to become a member? Quote Link to post Share on other sites
Gnarboots333 Posted July 28, 2013 Report Share Posted July 28, 2013 Has anyone gotten a hold of KJW for spare parts lately? Is the correct email address still kjworks@ms47.hinet.net? I know this question gets asked every so often, but I didn't see a recent inquiry regarding this issue and want to make sure my info is current. Thanks. Quote Link to post Share on other sites
Hut73 Posted July 28, 2013 Report Share Posted July 28, 2013 Has anyone gotten a hold of KJW for spare parts lately? Is the correct email address still kjworks@ms47.hinet.net? I know this question gets asked every so often, but I didn't see a recent inquiry regarding this issue and want to make sure my info is current. Thanks. Use the following: Sales@kjworks.com.tw Quote Link to post Share on other sites
Fmalca11 Posted August 15, 2013 Report Share Posted August 15, 2013 Good day guys.Have had some fun reading all the posts from 2013.Ive had 2 KJ Works in the last 3 years, and so far 0 complains and 0 gas leaks. Â Would you guys know, if there would be a problem internally wise with using a 509mm 6.03mm Falcon TBB, and using it as a DMR? Will this increase FPS and accuracy also? Â Increasing the stress on my internals, which will lead me to change them? Quote Link to post Share on other sites
Bastel Posted August 17, 2013 Report Share Posted August 17, 2013 Does anybody knows where i could get a new bb loader adapter? Has anybody the current email from kjw for ordering? Quote Link to post Share on other sites
Fmalca11 Posted August 17, 2013 Report Share Posted August 17, 2013 Www. Cradleairsoft. Com. They sell new adapters Quote Link to post Share on other sites
Hut73 Posted August 17, 2013 Report Share Posted August 17, 2013 Does anybody knows where i could get a new bb loader adapter? Has anybody the current email from kjw for ordering? I just posted the email address for kjw about 5 posts ago... Quote Link to post Share on other sites
su37su Posted August 25, 2013 Report Share Posted August 25, 2013 Anyone interested in a KJW M4? http://www.gasguns.info/forum/viewtopic.php?f=14&t=12632 Quote Link to post Share on other sites
Hut73 Posted August 25, 2013 Report Share Posted August 25, 2013 (edited) Anyone interested in a KJW M4? Â Â Fyi, Need to edit your post, and move it to the for sale threads. Edited August 25, 2013 by Hut73 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.