Jump to content
Sign in to follow this  
Donut

KJW M4

Recommended Posts

I use the same stock, but would recommend the one without the clamp, with some electrical tape it will fix the wobble not the clamp part of it. For the rail system I believe its a standard carbine length (7in?)

Thank you that was very helpful. I'm really new to the world of M4s if you can't already tell, haha.

Would you be able to link me to the stock you recommend by any chance? I'm not entirely sure what you mean by that.

Cheers,

Lycan

Share this post


Link to post
Share on other sites

Thank you that was very helpful. I'm really new to the world of M4s if you can't already tell, haha.

Would you be able to link me to the stock you recommend by any chance? I'm not entirely sure what you mean by that.

Cheers,

Lycan

 

PM me if you need anymore info, I consider myself knowlegdable enough about the AR platform to help. As far as costs go, you could litterally make your stock have little to no wobble if you put electical tape on the stock tube. SInce your looking at Magpul stuff I assume you want magpul and heres what my recommendation would be.

 

http://shop.ehobbyasia.com/magpul-pts-moe-stock-black.html

 

You still get the magpul look, but its cheaper then the CTR.

Share this post


Link to post
Share on other sites

PM me if you need anymore info, I consider myself knowlegdable enough about the AR platform to help. As far as costs go, you could litterally make your stock have little to no wobble if you put electical tape on the stock tube. SInce your looking at Magpul stuff I assume you want magpul and heres what my recommendation would be.

 

http://shop.ehobbyasia.com/magpul-pts-moe-stock-black.html

 

You still get the magpul look, but its cheaper then the CTR.

Alright I'll look into it.

Thanks again for all of the help, I really appreciate it.

Share this post


Link to post
Share on other sites

Again....

 

Just a reminder to everyone, if you want to sell your guns or kit then you must post them for sale in the proper classifieds section and not in this thread, I have removed a number of posts attempting to sell, warns will be issued for any attempts to sell and anyone who has already attempted it and tries again will face a suspension or be banned as per the forum rules.

 

In order to access to the sales sections of the forums, 100 posts is required. At this point your member status should change from 'Member' to 'Regular Poster'. If your post count reads 100 posts or higher and you do not have access, try to post in a section of the site where your post count increases - please remember that not all areas of the site (such as off-topic) contribute towards your 'official' post count.

 

Selling via forum status updates, general 'please buy' adverts in the non-sale sections of the forum or attempting to sell via pm are considered intentional evasion of the 100 post rule and most likely will result in a warning / and or suspension from the forum. Repeat offenders will be banned.

 

http://www.arniesairsoft.co.uk/forums/index.php?/topic/386-general-rules-and-guidelines/

Share this post


Link to post
Share on other sites

Got to test my kjw after a long time now.

 

- Big change is in the inner barrel, used 6.01 ported barrel before, results was bad, bbs flying all sorts of direction. Changed mine to 6.03 and all bbs going dead centre with no issue whatsoever (hop was off). Fps on 6.03 was 450 and distance to target of approx 12-15 meters

- Still need to test the TDC though as I forgot that part (too excited bout the barrel)

 

Any pics of the new hop? Would want to try that too incase my upper receiver not holding out well in the future, any solution to the back pin tab broken thing will make my day though :D

Share this post


Link to post
Share on other sites

I love the KJW M4 (do not own one anymore), and I always loved the gif KJW userbar that has been used for years. At another forum there was a member offering to make some cool userbars for use in forum signatures, so I had him create me a new KJW M4 "RELIABILITY INSIDE" userbar. So if you are a KJW M4 fan and wanted a first or second userbar to add to your signature, then "here's your sign..." Note that "Pillsbury" at the Airsoft Sniper Forum is the creator of the design.

 

By9zb.png

Share this post


Link to post
Share on other sites

I love the KJW M4 (do not own one anymore), and I always loved the gif KJW userbar that has been used for years. At another forum there was a member offering to make some cool userbars for use in forum signatures, so I had him create me a new KJW M4 "RELIABILITY INSIDE" userbar. So if you are a KJW M4 fan and wanted a first or second userbar to add to your signature, then "here's your sign..." Note that "Pillsbury" at the Airsoft Sniper Forum is the creator of the design.

 

By9zb.png

 

Nice post man :D I personally prefer the current gif. IMO this one has an almost video game BF3 COD and etc. feel to it but good nonetheless :)

Share this post


Link to post
Share on other sites

I can't find where to post this. Anyway I'm willing to trade my KJ V2 Bolt set for a V1 Bolt set. Pm me if you're interested.

 

we are all in that position man.. i have been trying to source a V1 for months now, no luck.

Share this post


Link to post
Share on other sites

A heads up to the community here:

 

Our new website will be live in a few days (Wed-Fri). Im just finalizing some shipping configuration stuff. Site will be reachable through our regular web address (www.cradleairsoft.com)

 

Among the items on the site will be the new bolt carrier though the stock levels will still say "out of stock" for another few weeks. The carriers are in production over here so we are entering the phase where we are waiting for anodize and packaging to take place.

 

Details as to pricing and what comes with each kit will be completely viewable, of course.

 

T

Edited by t_hum
  • Like 1

Share this post


Link to post
Share on other sites

Will definitely pick one up. I have a US address that you can ship to.

 

T, will you guys also be making any reinforced charging handles soon? Among my teammates, I'm noticing that the stock KJ charging handles break after a while. Some break sooner than later.

 

We've noticed that the charging handles are made of cast... uh... what appears to be pot metal, don't know if it can be called iron. But yeah, low durability.

 

It'd be awesome to have one that lasts a bit longer.

Share this post


Link to post
Share on other sites

We wont be taking pre-orders this time around. We considered it but it'll be easier on us to keep track of everything the regular way. What we will have though is a way to sign up on the bolt carrier's product page to receive a notification when they are up for sale. So everyone should get a notification that signs up.

  • Like 2

Share this post


Link to post
Share on other sites

We wont be taking pre-orders this time around. We considered it but it'll be easier on us to keep track of everything the regular way. What we will have though is a way to sign up on the bolt carrier's product page to receive a notification when they are up for sale. So everyone should get a notification that signs up.

Hello travis, good news...and when it is going to be the site up with the items?

Share this post


Link to post
Share on other sites

DAT MUZZLE BRAKE! looks like those 50 cal AR15's :P

 

And nice finnish on the BCG! I attempted to polish mine, lol

 

Did 120 gird and then 220; here are the results:

 

img0950fb.jpg

 

 

img0952oy.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.