Jump to content
Sign in to follow this  
Donut

KJW M4

Recommended Posts

Its mixed with CQB-R parts.. but yea, thats the M4A1 14.5 barrel... what i did is i removed part B4. Its made of steel as opposed to the rest of the barrel that seems to be aluminum, and it being so far forward, once removed, it does lighten it.

 

http://www.ar15barrels.com/profiles.shtml

 

Being so thin, basically the barrel becomes a "lightweight". You might think it looks bad as the first half would be government profile and then it becomes super thin, but the transition is hidden by the gas block... it looks pretty good.. and aggressive :)

Share this post


Link to post
Share on other sites

Airsplat, dont forget the codes, ill be even cheaper.

Well I checked Airsplat, and they are out of stock. Are there any other (preferably US) retailer that carry this gun? Also, I could've sworn that when Airsplat had them in stock, they were $300. Is it just me?

Share this post


Link to post
Share on other sites
Also is it better to buy the V1 or V2? I heard the V1 was more accurate or so,eating like that, but I don't want to drop $400 and find out I'm wrong.

 

There's no difference in accuracy between the versions. It's more a matter of the superiority of the v1 bolt group vs the v2. But the Cradle bcg will solve all of those problems once it's released...

 

Sent from my totally sexy, Android powered, IPod killing, Samsung Galaxy S3 ;-)

 

 

Share this post


Link to post
Share on other sites

Btw, there's a slightly upgraded v2 on eBay, which is always a good place to look for KJW GBBR's for sale...

 

Sent from my totally sexy, Android powered, IPod killing, Samsung Galaxy S3 ;-)

 

 

Share this post


Link to post
Share on other sites

Got a prob with my g&p DD ras a moment ago. So I put the ring and the outer barrel in place, screw the barrel nut right in and finally it stopped, but the ring still wobble, its like theres still a gap between the ring and the barrel nut, Im confused, anyone experience this? It also happened to my KA ras, it wont screw in to the last thread on my upper v2.

Share this post


Link to post
Share on other sites
Got a prob with my g&p DD ras a moment ago. So I put the ring and the outer barrel in place, screw the barrel nut right in and finally it stopped, but the ring still wobble, its like theres still a gap between the ring and the barrel nut, Im confused, anyone experience this? It also happened to my KA ras, it wont screw in to the last thread on my upper v2.

 

If I understand your issue correctly, I had a similar one w/ a second hand KJW I bought that came w/ a Madbull Mk18 DD RAS.

 

My solution to the problem was to place a rubber o-ring in between the two to close the gap. The rubber material was dense enough to provide the necessary force to eliminate the wobble, yet pliable enough to properly tighten everything down...

 

Hope I was right in my assumption of your problem!

 

Sent from my totally sexy, Android powered, IPod killing, Samsung Galaxy S3 ;-)

 

 

Share this post


Link to post
Share on other sites

i had the EXACT same problem, as i also had a madbull (well, china clone) DD and a G&P nut... and i also did the same as hut..

 

i had a bunch of #14 o rings from my AEG days, they are a bit small so i cut 2/3 of two and put them around the barrel after screwing the nut. Then came in the RIS, so when i tightened the six screws they pressed on the rubber "spacers".

 

It was more than perfect when i was done... The reason for this problem is the G&P nut is thinner than the AEG one.... end result and more pr0n:

 

img1161ns.jpg

Edited by Landa

Share this post


Link to post
Share on other sites

Ah ic then, thanks guys, was thinking of getting a thin copper cable to put in between as it is hard yet quite soft outside. I'll report on how it goes later on. Was going to ask how to put the 2 lower nut as it bumps with my lower receiver, truns out I need to screw it from outside in, was frustrated there lol.

Share this post


Link to post
Share on other sites

So long as the barrel is held solid by the barrel nut you'll be fine the mount ring for the DD rail should be loose until you clamp on the rail the whole thing will then be solid as the rail and mount ring sandwich the barrel nut.

Share this post


Link to post
Share on other sites

Constantly surprised and impressed by these rifles my team mate was able to full auto mag dump at the end of a night game last night (after midnight) in below freezing temperatures. Nice coating of frost on the mags after.

Share this post


Link to post
Share on other sites

Hey everyone sorry for being MIA for a while, (no one cares).

 

A friend of mine isnt able to use auto and the hook on the right side of his valve knocker broke off. He can put the selector on Auto, but is unable to pull the trigger. I suspect its something with his auto sear, but we are at a distance so its pretty difficult to troubleshoot.

Share this post


Link to post
Share on other sites
Some interesting product news on the way, got to see some images today that made me real excited.

 

Begin the rumor mill, Muwahahahaha

 

Put away the girlie mags Frog ;-)

 

Sent from my totally sexy, Android powered, IPod killing, Samsung Galaxy S3 ;-)

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.