Jump to content
Sign in to follow this  
Donut

KJW M4

Recommended Posts

quick question folks after how many mags would one consider cleaning the gun. i put about 30 mags through between the last 3 days and i havent cleaned it yet. id like to think that cleaning the weapon now would be a great idea, i would just like some advice on when you guys would consider the gun need cleaning.

Share this post


Link to post
Share on other sites
That is also a Dboys, It fits on right it just wobbles like hell. Thanks, but no thanks.

 

Mine fits on perfectly fine. Only issue with mine is it occasionally slips out of the D-ring while the gun is kicking around. You sure you have it attached right?

Share this post


Link to post
Share on other sites
another thing is that I would like to make it more accurate. So I need an inner precise barrel right? any suggestions? (cheaper the better :)) and whats with this "winter" part something? Does that help kjw m4 not to let gas out, all of it from the magazine when the temperature is too low?

 

Welcome Robi!

 

The best way to increase accuracy is going to be with a tightbore barrel. I sell them. Tokyo model sells them. Those are pretty much your only options at the moment. They also boost FPS by 20-30 FPS. Just did oldgamefreak's gun this week and when we were done it was shooting a blistering 500 FPS without the reducer installed.

 

As far as the "winter part" goes, it really depends on what gas you are using. If you use duster gas and you play in cold environments it might be worth looking at. I gather it was designed for use in TK guns using duster in Japan. If you use green gas/propane or you play in warmer weather its not something that is going to have a significant impact on performance.

Edited by t_hum

Share this post


Link to post
Share on other sites
Mine fits on perfectly fine. Only issue with mine is it occasionally slips out of the D-ring while the gun is kicking around. You sure you have it attached right?

 

I put it on right but it slips out of it's placeo n the Delta ring because the front barrel mount doesn't sit right on the barrel and allows it to slide forward.

Share this post


Link to post
Share on other sites
Welcome Robi!

 

The best way to increase accuracy is going to be with a tightbore barrel. I sell them. Tokyo model sells them. Those are pretty much your only options at the moment. They also boost FPS by 20-30 FPS. Just did oldgamefreak's gun this week and when we were done it was shooting a blistering 500 FPS without the reducer installed.

 

As far as the "winter part" goes, it really depends on what gas you are using. If you use duster gas and you play in cold environments it might be worth looking at. I gather it was designed for use in TK guns using duster in Japan. If you use green gas/propane or you play in warmer weather its not something that is going to have a significant impact on performance.

 

 

:o ...oh my god!....tanio power unleashed!

Share this post


Link to post
Share on other sites

The duster gas you find nowadays are most likely 152a. 152a is apparently more environmentally friendly.

 

500fps? That is why the KJ m4 is my favorite gun in my collection =)

 

And thanks Travis for the video.

Share this post


Link to post
Share on other sites

Yes, no problem. At 72 deg. F ambient temp you can get green gas down to the 280 range. Duster could theoretically be taken down as low at 240- range.

 

For UK players green gas and the reducer seem to work out well for playing within your countries limits. Using green also helps maintain snappy performance and cold weather use.

Edited by t_hum

Share this post


Link to post
Share on other sites
Awesome, once I get some stuff sold and unless something truly world changing comes out at IWA I'm getting one and a load of Cradle stuff for it :)

 

 

No doubt about my friend!!!!...no one! :D

Share this post


Link to post
Share on other sites

Well i just sold one of my AEG's to get enough money for 6 new mags. It's time to put this baby to the test :D

 

After the barrel install and with the reducer I am hitting ~400FPS W/20's. I can't wate to take it out and dial it in. Thanks again T_HUM

Share this post


Link to post
Share on other sites

So what BB weight do you guys use? I was using .20's and I am pulling to the right, Very noticeably. I was talking to a guy that runs a gas sniper rifle and he suggested it could caused by too light of BB's.

 

Also, does anyone know where to get another rod for the mag feed tube? I let someone use her for a scrimmage and he lost the feed rod. I knew better than to let someone else use it.

 

 

Share this post


Link to post
Share on other sites

Ordered 3 mags from Redwolf airsoft Friday Morning and they were at my door by Sunday at Noon!

Hope some of you guys looking for them got a couple.

 

Question:

How long do you guys take to fill the magazines? I can sometimes count to 30 or 40 and they still don't seem to be full? I have never got "spitting" like I do with pistol mags. IS this because I am using HFC or do I just need to fill them longer?

Edited by dstole

Share this post


Link to post
Share on other sites

hello guys i was wondering about the bb's weight that suits the best for the tanio, and because of it, how far it could shoot ....hmmm... also i was wondering the same question about the time for the gas or propane to load a mag....i'm using .25's airsoft elite bb's, and the same propane raven used for all his shooting and testing.... :)

Share this post


Link to post
Share on other sites
Does anybody knows which fireselektors are fitting into the kjw m4?

 

The only selectors that work are KJW selectors, there are no after market selectors as of yet,,,

Share this post


Link to post
Share on other sites

Forehand i have to ask for a sorry of this forum cause is for de KJ WORKS TANIO KOBA M4A1...but..i don's really know where to post this news i've found thanks to a member of my team that informed me this minutes ago...check the link and read by yourselves.....

 

 

http://airsoft-news.eu/comment.php?comment.news.4014

 

 

so sad that some times ignorance could do this to our beloved game... :unsure:

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.