AustinWolv Posted June 2, 2010 Report Share Posted June 2, 2010 Thanks Austinflow. I have an KJW M4 and i get now an offer for a inokatsu super version. So i play with the thoughts to sell my kjw and buy the inokatsu. But when i read this, i think i kept the KJW M4. (Sorry for offtopic, what are the problems which you have with your inokatsu? maybe you could answer per pm? ) Sure, PM is fine. Quote Link to post Share on other sites
stickyittoyou Posted June 2, 2010 Report Share Posted June 2, 2010 (edited) Wow got the gun today. I am so awe struck at how loud a GBB rifle is. It's so jaw dropping! It sounds like a real rifle (cycling, not the loud bang!) Oh and today I went out of my way to send a message to RA-tech on youtube. Asking him if he'll ever consider making a hardened steel KJW Magazine Catch; since that's the part that we all need to get an upgrade for. We'll see if you responds... most likely not. Edited June 2, 2010 by stickyittoyou Quote Link to post Share on other sites
danielsilva Posted June 2, 2010 Report Share Posted June 2, 2010 So for people like me who were waiting for the KJW to be back in stock in Europe, AirsoftHQ has them in stock again! But they upped the price from 320€ to 350€, greedy little bastards Time to order a new one Quote Link to post Share on other sites
stickyittoyou Posted June 3, 2010 Report Share Posted June 3, 2010 My KJW stuff went from friggin Kentucky to Alaska.... HAH! They better have that on the first day shipment back to Maine. Quote Link to post Share on other sites
t_hum Posted June 3, 2010 Report Share Posted June 3, 2010 Dont trust the UPS webapp. Ive had orders do this before too. I doubt the package actually went that distance. More like paperwork was processed in a location. Quote Link to post Share on other sites
Break100 Posted June 3, 2010 Report Share Posted June 3, 2010 (edited) In another forum, Raven1 congratulated me as the first KJ m4 owner who had a leaky mag. Instead of fixing it, i returned it to the dealer for a new one, and i bought 4 new mags as well. I filedl in a small gas in all mags and waited for the next 24 hours, and found they're still fine. Edited June 3, 2010 by Break100 Quote Link to post Share on other sites
stickyittoyou Posted June 3, 2010 Report Share Posted June 3, 2010 In another forum, Raven1 congratulated me as the first KJ m4 owner who had a leaky mag. Instead of fixing it, i returned it to the dealer for a new one, and i bought 4 new mags as well. I filedl in a small gas in all mags and waited for the next 24 hours, and found they're still fine. haha! congats! Too bad most of wont be able to do that since we don't have local shops to bring items back to. So my order went from Hong Kong, to Korea, to Alaska, to Kentucky Quote Link to post Share on other sites
Pantelis Posted June 3, 2010 Report Share Posted June 3, 2010 So for people like me who were waiting for the KJW to be back in stock in Europe, AirsoftHQ has them in stock again! But they upped the price from 320€ to 350€, greedy little bastards Time to order a new one I have purchased many things from that shop and they have excellent service. Another European (Greek) shop that has it at 375 euro: http://www.vasilikos.com.gr/index.php?PageLang=english Quote Link to post Share on other sites
DiscoBiscuit Posted June 3, 2010 Report Share Posted June 3, 2010 Wow got the gun today. I am so awe struck at how loud a GBB rifle is. It's so jaw dropping! It sounds like a real rifle (cycling, not the loud bang!) Hi, will you be posting any pics? Curious to see the rail. Quote Link to post Share on other sites
stickyittoyou Posted June 3, 2010 Report Share Posted June 3, 2010 Wow got the gun today. I am so awe struck at how loud a GBB rifle is. It's so jaw dropping! It sounds like a real rifle (cycling, not the loud bang!) Hi, will you be posting any pics? Curious to see the rail. I'm actually taking it off the gun right now... haha... I got a Daniels Defense MK18 RIS rail that I am trying to put on my gun right now. I can't put the Gas Rail into the G&P Gas block... so I'm sitting here sand papering down the edge to fit inside of it. haha... Other then that the original RIS rail is nice, how-ever they put this small metal tab on the front top that is held in by a pin that can easily slip out if you take the top half of the RIS off. The reason for the tab is to put tension on the RIS to be even more sturdy. I'll post some pics after I am done. Quote Link to post Share on other sites
stickyittoyou Posted June 3, 2010 Report Share Posted June 3, 2010 (edited) I am waiting on my MAGPUL sights, should be here tomorrow hopefully. AND my Knights Suppressor which hasn't been mailed just yet... blah! The downfall to putting all of this on is that I'm just going to have to take it off in order to replace the barrel that T_HUM made. I can't wait still though Edited June 3, 2010 by stickyittoyou Quote Link to post Share on other sites
poopstania Posted June 4, 2010 Report Share Posted June 4, 2010 (edited) That looks awesome, dude. Needs a paintjob, though. Update on mine: put the original barrel in, added T_Hum's 6.03 363mm inner barrel, got some real KAC panels, spray-painted them. Waiting on Troy folding back sight, PEQ-15 laser and flashlight, KAC TT-brake. The LaRue is nice, but I find myself wanting a URX... got the KAC craze. Anyway, maybe another time. Edited June 4, 2010 by poopstania Quote Link to post Share on other sites
stickyittoyou Posted June 4, 2010 Report Share Posted June 4, 2010 (edited) That looks awesome, dude. Needs a paintjob, though. Update on mine: put the original barrel in, added T_Hum's 6.03 363mm inner barrel, got some real KAC panels, spray-painted them. Waiting on Troy folding back sight, PEQ-15 laser and flashlight, KAC TT-brake. The LaRue is nice, but I find myself wanting a URX... got the KAC craze. Anyway, maybe another time. I don't want to paint it; rather have the parts make the design of the gun. Yeah the Magpul sights I am getting are in Dark Earth, I'm going to get a MAGPUL stock, MAGPUL Grip , and get some MAGPUL rail covers like this to go on it \/ All in Dark Earth. UPDATE - Just ordered 3 MAGPUL Ladder Rail Covers Edited June 4, 2010 by stickyittoyou Quote Link to post Share on other sites
poopstania Posted June 4, 2010 Report Share Posted June 4, 2010 Yeah, I'm kind of the same way -- but I would paint the lower or upper FDE as well. As I did myself. Anyway, anyone else willing to sell me mags? Snoopy was going to, but hasn't replied to my offer yet... Quote Link to post Share on other sites
DiscoBiscuit Posted June 4, 2010 Report Share Posted June 4, 2010 Very nice, I'm a big fan of that look. One of those C-More replica's with the rear LMT site might be interesting. If you have chrono I would be interested to know the before and after FPS with the new barrel. Also, is removing the front site just a matter of tapping out some pins? Quote Link to post Share on other sites
stickyittoyou Posted June 4, 2010 Report Share Posted June 4, 2010 (edited) Very nice, I'm a big fan of that look. One of those C-More replica's with the rear LMT site might be interesting. If you have chrono I would be interested to know the before and after FPS with the new barrel. Also, is removing the front site just a matter of tapping out some pins? I don't even have a crono, sorry bub. As for the Front Sight; yes it's just tapping the pins out. __________________________________________________________________________________ Hopefully I get out of work with enough time to go get my stuff from the postal office... Getting my Sights, and my Suppressor today! If my suppressor is too close to my RIS rail I'll just put a spacer on the flash-hider from another airsoft gun, that should give it enough clearance. Edited June 4, 2010 by stickyittoyou Quote Link to post Share on other sites
Lupus78 Posted June 4, 2010 Report Share Posted June 4, 2010 (edited) Interesting thing was, that the two guns I ordered skipped the customs altogether. First time ever when I've ordered anything larger from HK. Now I ordered from eHobbyAsia. I just had to fetch it from the post office, and before that they had actually tried to deliver it to my home. So I saved the taxes and customs fee (together about 25% of the shipped price for two guns). Gonna buy some extra mags with that saved money. By the way, is there some trick with the hopup? Mine seems to spin only left, never stopping. And the other direction is stuck... (Gonna take a closer look tonight.) Edited June 4, 2010 by Lupus78 Quote Link to post Share on other sites
t_hum Posted June 4, 2010 Report Share Posted June 4, 2010 The hop only goes one way. As you turn it the hop increases to a point and then the hop resets to zero. I think there are six or so positions so it goes 0-1-2-3-4-5-0-1-2-3...... And on and on. Quote Link to post Share on other sites
Lupus78 Posted June 4, 2010 Report Share Posted June 4, 2010 (edited) Thanks, good to know! I've never encountered such a design and I haven't tested it outside yet. The overall quality and mechanisms just amaze me. It really has Tanio Koba written all over it. Can't wait to test it in skirmish. I'm gonna install your goodies probably tonight or tomorrow at the latest. Also have to check the auto sear if that's what causes the auto problems. I'll post some pics of my baby after I've done the upgrades. Cheers! - Lupus Edited June 4, 2010 by Lupus78 Quote Link to post Share on other sites
sacairsoftsn00py Posted June 4, 2010 Report Share Posted June 4, 2010 I wish there were more clicks to the hop than the 6-8 clicks it has so the hop can be (more) fine tuned a bit more. They TK could have easily done that. Still, the hop is awesome... "Date # Location Delivery Status 4-Jun-2010 Hong Kong Item posted and is being processed. 4-Jun-2010 Hong Kong Processed for departure. 4-Jun-2010 Hong Kong The item left Hong Kong for its destination on 4-Jun-2010" KJW M4 CQBR on the way...Its Friday the 4th here. I'm guessing that pending customs inspection...etc..It'll be in my hands on either Monday or Tuesday. Wednesday the latest... Quote Link to post Share on other sites
senators2904 Posted June 4, 2010 Report Share Posted June 4, 2010 Senators- You should get the bolt carrier extension ASAP. Its worth paying for it over paying for a brand new lower receiver and detent pin. with what happened to me last airsoft game im almost afraid to fire it until i get one. Quote Link to post Share on other sites
stickyittoyou Posted June 4, 2010 Report Share Posted June 4, 2010 Adding the VFC Knights Suppressor and the MAGPUL sights, definitely made the gun have that extra touch I was looking for. It went on without any hiccups either. ________________________________________________________________________________________________________________________________ ________________________________________________________________________________________________________________________________ ________________________________________________________________________________________________________________________________ Quote Link to post Share on other sites
sacairsoftsn00py Posted June 4, 2010 Report Share Posted June 4, 2010 with what happened to me last airsoft game im almost afraid to fire it until i get one. What happened? LoL! stickittoyou- I like your rail...not too sure about that silencer...the gun seems like it wants to be some sort of an SD. Hmm...Yeah, dont pay attention to me, I'm particular to shorter M4's. Anything longer than an M4 carbine is too long for me I just chronoed my gun....at about 70 degrees, it still shoots in the 390's with .20g BBs with my inner barrel chopped down to 6.25". I'm having a buddy cut it down again probably by 3/4". Ugh....My barrel will be down to 5.5" soon. Quote Link to post Share on other sites
stickyittoyou Posted June 4, 2010 Report Share Posted June 4, 2010 (edited) stickittoyou- I like your rail...not too sure about that silencer...the gun seems like it wants to be some sort of an SD. Hmm...Yeah, dont pay attention to me, I'm particular to shorter M4's. Anything longer than an M4 carbine is too long for me I'll take a picture of it without the silencer soon for you. I love it! It'll look even better as more MAGPUL accessories get on my gun. - I'm going to need it anyways, I have a 363mm barrel (14 inchs) That's going to be about 1/3rd into the silencer in length. - I was thinking about getting two hop-up units, one that will have the CQB length barrel and the other with the 363 Edited June 4, 2010 by stickyittoyou Quote Link to post Share on other sites
sacairsoftsn00py Posted June 4, 2010 Report Share Posted June 4, 2010 I wouldn't recommend constantly taking down the front end as its attached to the upper receiver. Stress out the receiver too much and something might break. According to Kai, KJW will not ship upper receivers to the US. I've had a Noveske 10" rail on my KJW M4 before and thought it was still too long with the firepig muzzle. At the moment, I'm looking looking at possibly going for a Noveske 7" rail and cutting my outer barrel down to 7.25". Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.