Gunmane Posted August 28, 2016 Report Share Posted August 28, 2016 Dumb question for the reason I have never seen someone do it. I'm so far behind the times battery wise that I still use nimh sticks since the majority of my collection that I use on game days is east bloc in design. What I am wondering is, if I someday got a RPK (probably lct), would there be enough space under the receiver cover and the rear sight base if I swapped to a top/forward wiring setup, or is there something in the way? I have never seen someone do it before. Link to post Share on other sites
Lone_Bullet Posted August 28, 2016 Report Share Posted August 28, 2016 You'd have to. I think lct don't do stock wiring . Or wzs that E&L? Sent from my C6603 using Tapatalk Link to post Share on other sites
howitzer Posted August 29, 2016 Report Share Posted August 29, 2016 LCT have the battery in the stock for their RPK. That being said, had an RPK for a while with a real steel stock and used a top wired gearbox. There was enough room for a Lipo under the dust/receiver cover. Link to post Share on other sites
Skarclaw Posted August 30, 2016 Report Share Posted August 30, 2016 I've got a few questions, would appreciate any help cheers! 1) Any recommendations on where I can get some silicon oil and teflon grease? Preferably at the same place. Was thinking maybe a cycle shop or a motorcycle place? 2) An old gbb has got some very leaky mags, a design problem I think (pre system7 KSC USP). If I can't fix it by soaking o-rings in oil, can anybody recommend me an epoxy with which to seal up the base plates? Will any old stuff do or is there stuff I should look out for? 3) The above GBB is a Uncompany custom USP. Cause of the mags being shit it's never shot well. It's been "upgraded" with a stronger recoil spring and high flow valves, however I'd like to take it back to stock. Recoil spring replacement doesn't seem a big deal but I'm a bit lost with the high flow valves - I assume they are part of the magazine? Anyone know of where I can get normal flow valves? Thanks! Link to post Share on other sites
mimesis Posted August 30, 2016 Report Share Posted August 30, 2016 http://www.rainbow8.com/collections/ksc-usp-45 Link to post Share on other sites
Brooxy Posted August 30, 2016 Report Share Posted August 30, 2016 The V3 trigger contacts are the same for pretty much all V3 guns, the trigger will be different from an ak to an g36 to an aug. The aug trigger is very different but the plastic bits inside and the switch is the same. Thanks. Just picked myself up a v3 gearbox for a £5.00 at the NAE car boot, so I'll be gutting that soon and reusing the shell / trigger contacts to rebuild my aug :) Link to post Share on other sites
Gunmane Posted September 27, 2016 Report Share Posted September 27, 2016 Had a rough time as usual with downgrading a gun (cyma bizon this time), and instead of the m110 spring I had thought about using, I ended up using an old tm p90 stock spring because it was "shorter" like the stock spring that came with the gun. My dumb question as a result is, is spring length a thing? I just could not get the m110 in for the life of me, and it is perhaps an inch or two longer than both of the "shorter" springs. Link to post Share on other sites
Tw1tch Posted October 26, 2016 Report Share Posted October 26, 2016 Difference between Crye Precision Combat and Field trousers? The only things I see is the combat have "a more aggressive cut" and specifically mention stretch panels. Wondering if there is more to it than that (before I choose my set)? Link to post Share on other sites
Skarclaw Posted November 1, 2016 Report Share Posted November 1, 2016 Hi me again ; My LR300 (G&G) has very low fps (240 with a .2), presumably a loss of compression. Thought it might be best to replace everything with this: https://www.amazon.co.uk/Airsoft-Cylinderset-Pistonhead-Cylinder-Cylinderhead/dp/B00GAXBOTM I appreciate that this might not solve the problem, but I figured it's a good a place to start as any... Anyway, is there a good reason not to get this? I've heard pretty good things about A&K but you never know... This isn't my main gun so no reason for whizzbang parts, though I'll consider anything. Cheers guys! Link to post Share on other sites
Cryptkeeper Posted November 2, 2016 Report Share Posted November 2, 2016 Good evening! A friend of mine got a 3d Printer and he managed to get a 3d file of a rail handguard to put on is CYMA. I have a G&G M4 and i would like to change the classic M4A1 handguard for a classic ris handguard, but i havent had any luck finding a 3d file of it... the ones i find are "modern handguards" that i dont fancy alot... anyone there that can orientate me a 3d file of the ris for the m4 ? Cheers Link to post Share on other sites
Pdubyuh Posted November 3, 2016 Report Share Posted November 3, 2016 Difference between Crye Precision Combat and Field trousers?The only things I see is the combat have "a more aggressive cut" and specifically mention stretch panels.Wondering if there is more to it than that (before I choose my set)?Field = BDU stylecombat = Built in knee pads and stretch panels etc Link to post Share on other sites
Cannonfodder80 Posted November 10, 2016 Report Share Posted November 10, 2016 Is the JG SIG 552 body compatible with the TM SIG 552? Link to post Share on other sites
Got Wood? Posted December 7, 2016 Report Share Posted December 7, 2016 On an Airsoft pistol if the round is chambered and the hammer is good to go, if you pull the slide back slightly the trigger will fail to engage the hammer. Does this happen on real steel pistols as well? Obviously not revolvers though Link to post Share on other sites
Gunnman Posted December 7, 2016 Report Share Posted December 7, 2016 Yes, becuase it can't fire out of battery. I've seen videos of police officers in close encounter situations actually pushing the slide out of battery on perps guns to prevent the gun from firing. This all depends on the design of the gun. Dangerous and risky, but saved a few lives. Link to post Share on other sites
Lone_Bullet Posted December 15, 2016 Report Share Posted December 15, 2016 Are there any known airsoft tech seminars known to man on this planet? ^^. I'm not smart enough to reverse engineer GBB's and knowledge on the net is melting away. Sent from my C6603 using Tapatalk Link to post Share on other sites
Tw1tch Posted December 26, 2016 Report Share Posted December 26, 2016 Does anyone know if the Pulsar Challenger has an auto cut off if exposed to bright lights to protect it? Link to post Share on other sites
Vortix Posted May 9, 2017 Report Share Posted May 9, 2017 Anyone know if the Night Evolution Inforce WML replicas are any good? Link to post Share on other sites
ForkTailedDevil Posted May 10, 2017 Report Share Posted May 10, 2017 No, the light is fine but the rail mount is rubbish. It's can't be screwed on securely in my experience with them, and from others I have heard Link to post Share on other sites
Vortix Posted May 10, 2017 Report Share Posted May 10, 2017 Hmm alright thanks. I'll consider saving for a real one then. They're not that ridiculously expensive. Link to post Share on other sites
Got Wood? Posted May 16, 2017 Report Share Posted May 16, 2017 I've got one that's not worth making a new thread for. Was the A1 removeable carry Handle, like the DIS on the C8, ever used on any other colts, or just Canadian rifles? Link to post Share on other sites
Hopna Posted May 18, 2017 Report Share Posted May 18, 2017 The A1 removeable handle was never used by Colt. I guess only Diemaco used it, as they started producing flattop receivers before Colt did. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.