canizzle Posted July 27, 2006 Report Share Posted July 27, 2006 Have you guys seen the Boondock Saints? They use M9s with some silencer looks so nice. Link to post Share on other sites
canizzle Posted July 27, 2006 Report Share Posted July 27, 2006 After watching Boondock Saints, I want a beretta. Ok, first of all are there any M9 berettas that are full metal ( I dont want an elite version )? I know KJW makes one, but I dont know if you can put a G&G threaded barrel on it. Are there any other berettas that are capable of being upgraded to full metal with threaded barrel? Link to post Share on other sites
Vicks Posted July 27, 2006 Report Share Posted July 27, 2006 After watching Boondock Saints, I want a beretta. Ok, first of all are there any M9 berettas that are full metal ( I dont want an elite version )? I know KJW makes one, but I dont know if you can put a G&G threaded barrel on it. Are there any other berettas that are capable of being upgraded to full metal with threaded barrel? <{POST_SNAPBACK}> I think KJW based their m9 off the TM, if so the G&G should fit. You can get full metal kits for the WA m9s and the TM, not sure about silencing the WA but you can get the silencer adapter that fits on the end of the barrel (can't seem to find it now but i'll look later if someone doesn't link before me just gotta go out for a bit) They say it fits all M9 variants so i imagen it does fit, just never seen it on one Link to post Share on other sites
canizzle Posted July 27, 2006 Report Share Posted July 27, 2006 Hey is there any way to make a Tokyo Marui M9 full metal without making it elite version? Link to post Share on other sites
hitmanNo2 Posted July 27, 2006 Report Share Posted July 27, 2006 Yeah, theres a Zeke kit if you can find it. Link to post Share on other sites
expvideo Posted July 27, 2006 Report Share Posted July 27, 2006 The G&G barrel will work on a KJW. Whatever the one Jungletoy used to sell is, don't get it. That one will get a mag or two out before the silencer snaps it in half. I know, I've had two. The sound was amazing though. A full size silencer (about 8 inch or so) on a gbb of any kind makes and AWESOME sound. Link to post Share on other sites
canizzle Posted July 28, 2006 Report Share Posted July 28, 2006 All of the TM parts will fit on a KJW right? (or the other way around) Because since KJW is not that reliable I was thinking about putting all TM internal parts inside a KJW Metal Body and then installing G&G barrel. Will it work? Link to post Share on other sites
kilo_64 Posted July 28, 2006 Report Share Posted July 28, 2006 The only things that aren't reliable on a KJ m9 are their mags. Other then that everything else (internally) is identical. Link to post Share on other sites
canizzle Posted July 28, 2006 Report Share Posted July 28, 2006 What is wrong with their mags? And the TM one doesnt have hop up just liek the KJW? Link to post Share on other sites
evilhippy Posted July 28, 2006 Report Share Posted July 28, 2006 KJ mags are made of crappy metal, and the valves/seals tend to blow easily. Both my KJ Berettas have had mag issues, but the HFC mags seem to fit them fine (despite the ongoing furore about TM/KJ/HFC (in)compatibility ) Link to post Share on other sites
hitmanNo2 Posted July 28, 2006 Report Share Posted July 28, 2006 My silver Beretta 92's All my Beretta 92's Link to post Share on other sites
Milla Posted July 28, 2006 Report Share Posted July 28, 2006 The G&G barrel will work on a KJW. Correct, i just out one in mine, had to file the inside of the slide down a tiny bit, but it works great. Link to post Share on other sites
evilhippy Posted July 28, 2006 Report Share Posted July 28, 2006 Hitman - are all of those airsoft? The matte finish on the mags and some of the guns themselves looks like CO2 and/or PFC finishing. And what the hell is that slightly stubby one at the top of the 2nd picture and top-left of the 1st picture - looks like a Centurion, but the barrel is too long and its a bit .... well, just not quite right for one o' them. Please do share Link to post Share on other sites
hitmanNo2 Posted July 28, 2006 Report Share Posted July 28, 2006 Heh, heh, all the black ones are WA's and so is the one with the white grips. The one with the black grips is PFC and the one with the wood grips is CO2 which is bizzarely out of proportion as your eagle eyes noticed. So theres one PFC silver mag and two real steel silver mags. Link to post Share on other sites
expvideo Posted July 30, 2006 Report Share Posted July 30, 2006 What is wrong with their mags? And the TM one doesnt have hop up just liek the KJW? <{POST_SNAPBACK}> They both have hopup. KJW is reliable. I've had 4 and never had a problem with them. Ever. Just stay away from KJW USPs. those are pieces of ######. Link to post Share on other sites
angel_wings Posted July 31, 2006 Report Share Posted July 31, 2006 (edited) g&g threaded barrel. ss-80 silencer. milspex red/green red dot. walther mt1 taclight still need all of the above again for my 2nd pistol! rail is still needed for the dot sight as redwolf didn't have the one i wanted (obviusly!) hogue grips and a few extended mags would be nice to complete the look! And i might just have to silver the whole thing up! just you wait till i have both up and running!! Edited July 31, 2006 by angel_wings Link to post Share on other sites
evilhippy Posted August 1, 2006 Report Share Posted August 1, 2006 Well if you really want to comprehensively destroy the beauty of a Beretta, then that your prerogative dude Link to post Share on other sites
patsfan1453 Posted August 3, 2006 Report Share Posted August 3, 2006 Lets get this thread goin again with pics of my new KSC M9! Link to post Share on other sites
Beta Posted August 5, 2006 Report Share Posted August 5, 2006 Might I ask, what am best silencer adaptor for the m92? Link to post Share on other sites
canizzle Posted August 5, 2006 Report Share Posted August 5, 2006 Ahhhh, wouldn't adding a silencer slow down the slide movement? Link to post Share on other sites
Beta Posted August 5, 2006 Report Share Posted August 5, 2006 Ahhhh, wouldn't adding a silencer slow down the slide movement? <{POST_SNAPBACK}> Yes, though I would also be purchasing a 150% recoil spring and considering I've only ever run this pistol on propane the reduction in cycling time would end up being negligible at best. Really the biggest reason I'd like to add a suppressor is to be able to mount a laser onto the suppressor itself. I've tried mounting one onto the side of the flashlight, but I really don't like the look of it. Link to post Share on other sites
TheLair Posted August 7, 2006 Report Share Posted August 7, 2006 If someone could link me to a place where I can find RS grips for this gun that would be awesome. I can't seem to find any that are under $200 (Crimson Trace). Link to post Share on other sites
blink me Posted August 12, 2006 Report Share Posted August 12, 2006 What make is that elite? Cheers Link to post Share on other sites
Classicx Posted August 12, 2006 Report Share Posted August 12, 2006 Lets get this thread goin again with pics of my new KSC M9! http://i21.photobucket.com/albums/b295/19026/DSCF0003-3.jpg http://i21.photobucket.com/albums/b295/19026/DSCF0002-1.jpg <{POST_SNAPBACK}> pains me to look at the tip of your gun =( Link to post Share on other sites
patsfan1453 Posted August 12, 2006 Report Share Posted August 12, 2006 Yeah I know but its MUCH better now. Link to post Share on other sites
Recommended Posts