midnight_sailor Posted September 21, 2009 Report Share Posted September 21, 2009 Here it is, ordered from gunnerairsoft about a week ago, and I just got it a few days ago. At $53 USD, this thing may seem a bit pricey compared to other red dots on the market like the G&P aimpoint, but it makes up for it with its uniqueness in shape as well as with its dual rds and laser function. First off, the whole unit is built from metal and feels both hefty and sturdy. The paint seems like it’ll hold up fine and won’t be prone to chipping. However, there is one big problem with the unit, which may or may not be present on others depending on the QC of the unit. The picture below shows two problems. First, the scope isn’t actually centered in the unit and you can actually see a bit of its insides. There is a sheet of glass in front of the scope though, so there won’t be any problems with dirt or water getting in through the gap. It also doesn’t seem to affect the picture or function of the scope, so it’s more of a cosmetic problem. The second problem is the spring that is visibly pressing against the laser unit. Not only does it seem like an eyesore, but because there is no glass cover on this part, that spring could possibly fall out and ruin the windage and elevation adjustments. The spring also came misaligned so that it didn’t provide enough elevation, which was quickly fixed by carefully pushing it under the laser more. Overall, these were the two biggest problems for me, but for those who aren’t perfectionists, it’ll all work out as these problems don’t really affect the function of the unit (unless that spring falls out). Now onto the red dot. Notice how the unit doesn’t sit flush with the G36 carry handle, and that the switch for the laser is on the left (requires 3 lr44 batteries) The dot is nice and round as well as clear and bright. It holds up well in bright environments and is visible even when aiming at the sky. However, there are no intensity adjustments for the dot, and although the dot also works fine in dark environments, some glare from the dot may be visible. The field of view is slightly smaller than that of an aimpoint, but still works fine. Shooting with the dot works beautifully just like any other rds, and the parallax on the dot when looking from at it from different angles is minimal, as shown in the pictures below. Quote Link to post Share on other sites
midnight_sailor Posted September 21, 2009 Author Report Share Posted September 21, 2009 Here is a picture of the windage and elevation adjustment slots (adjusted using an allen key) And here is a picture of the on off switch for the dot, along with the windage and elevation adjustments for the laser, which are unmarked and use a smaller allen key. Notice how the unit is attached to the rail with a large screw similar to those used on eotechs. Overall, the unit works beautifully, albeit with some cosmetic flaws. I’d say that it was worth the money, especially since the unit doesn’t have to be used on the G36 carry handle and can be attached onto anything with a rail, as seen in the beauty shots below. Quote Link to post Share on other sites
n00bTard Posted September 22, 2009 Report Share Posted September 22, 2009 Thanks for the review with lots of pictures. I'd love to pick one up, soon as someone has it in-stock again. Other than Gunners, are any other retailers selling this? Quote Link to post Share on other sites
midnight_sailor Posted September 22, 2009 Author Report Share Posted September 22, 2009 I believe px-airsoft has some too. Never tried them out though, so I'm not sure of their service quality. px-airsoft Quote Link to post Share on other sites
Wege Posted September 22, 2009 Report Share Posted September 22, 2009 that does not look out of place on the AK like that. Nice Quote Link to post Share on other sites
Rampenfest Posted September 24, 2009 Report Share Posted September 24, 2009 By the looks of it, it appears that to install this on a G36, you have to buy a new carry handle with a rail on top? Is this correct or can it be placed on a non-railed carry handle? Quote Link to post Share on other sites
midnight_sailor Posted September 24, 2009 Author Report Share Posted September 24, 2009 It has to be placed on a railed handle Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.