Whan Posted February 6, 2010 Report Share Posted February 6, 2010 Yes, however you may or probably will not be able to collapse the stock all the way (for most lipo stick batteries) Link to post Share on other sites
Noveske Posted February 6, 2010 Report Share Posted February 6, 2010 Do the CTR stocks take stick li-po batteries without requiring the cheek riser? Neovenom, what kind of rail system are you using for the last one? It depends on your stock buffer tube. KA/G&P makes a stock buffer tube for the M4 series in which the fastening point is pushed forward enabling a longer space for you to store lithium batteries. That said, it also depends on the type of lithium battery and plug type you use. The shorter version (4") ones will fit for sure and the longer (5") version will have a tight fit, especially if you use a T-Plug. There is 5.5 inches of length in the KA version of the stock buffer tube. Your CTR SHOULD be able to collapse fully. Link to post Share on other sites
Noveske Posted February 6, 2010 Report Share Posted February 6, 2010 yes, that is the dytac carbine upper receiver. I have owned 2 of these. One with the Teflon coat and one without. Even the TEFLON version has problems with the paint rubbing off quite easily. Have you encountered this problem? Link to post Share on other sites
Noveske Posted February 6, 2010 Report Share Posted February 6, 2010 I LOVE your gun Thank you. On that note. A couple of updates on my Magpul-LaRue GBBR, "Live Free or Die, with an Unfair Advantage" Link to post Share on other sites
fiddlesticks4220 Posted February 6, 2010 Report Share Posted February 6, 2010 How does that light set up work out for you? Link to post Share on other sites
Noveske Posted February 6, 2010 Report Share Posted February 6, 2010 (edited) How does that light set up work out for you? Me? It's not too bad. I can access the switch with my index finger while maintaining a firm grip on the AFG. Edited February 6, 2010 by Noveske Link to post Share on other sites
frogfish Posted February 6, 2010 Report Share Posted February 6, 2010 What barrel is that, I like it. Link to post Share on other sites
Noveske Posted February 6, 2010 Report Share Posted February 6, 2010 (edited) What barrel is that, I like it. Prime's stainless steel Noveske barrel. Comes with a 10.5" extention or a 12.5" extention (I use the 12.5") and a stainless steel Noveske Gas block. Edited February 6, 2010 by Noveske Link to post Share on other sites
Jariko Posted February 6, 2010 Report Share Posted February 6, 2010 Pic 1 Pic 2 quicksilver6184, that gun is just pure epic <3 I want it now, how much did this beautiful creation cost to you? Part list, and maybe little bit more pics too, please Link to post Share on other sites
NeoVeNoM Posted February 6, 2010 Report Share Posted February 6, 2010 Do the CTR stocks take stick li-po batteries without requiring the cheek riser? Neovenom, what kind of rail system are you using for the last one? again, Dytac carbine upper receiver. the rail and upper are in 1 piece. @noveske: I have no problems at the moment. Mine came with an outer barrel. I don't know if all of them are like that. When I see pictures about the kit, most of them don't have an outer barrel. Link to post Share on other sites
Dickens Posted February 6, 2010 Report Share Posted February 6, 2010 Wow. Magpulled 416's look amazing. Whats withe the hole in the magwell? So PMAGS fit? Hopefully the PTS EMAGs will work better in 416's. Mine are very tight in my M4, but Ive gotten used to it. Thanks The hole in the magwell is normal aint it? I hope so haha its a JG metal body if that makes any difference. And yeah the PMAGS fit, they are a little tight but they do fit and feed with no problems. Dickens Link to post Share on other sites
Ivan le Fou Posted February 6, 2010 Report Share Posted February 6, 2010 Link to post Share on other sites
quiksilver6184 Posted February 6, 2010 Report Share Posted February 6, 2010 quicksilver6184, that gun is just pure epic <3 I want it now, how much did this beautiful creation cost to you? Part list, and maybe little bit more pics too, please Magpul PTS Reciever Magpul PTS Stock Tube Magpul PTS MOE Stock Magpul PTS MOE Grip Magpul PTS Metal MOE Grip Base Magpul PTS XT Rail Covers (Custom Cut) Magpul PTS Ladder Style Rail Covers Magpul PTS PMags x 6 Magpul MS2 Sling G&P M120 Gearbox (Rear Wired) G&P M160 Motor G&P G2 LED Flashlight G&P Aimpoint Comp2 G&P Aimpoint Catilever Mount G&P Daniel Defense MK18 RIS G&P 10" Steel Outer Barrel G&P Hop Up Unit King Arms Flashlight Mount King Arms Knights VFG KM Head 6.03 Tightbore Star HK 416 Front and Rear Sight Firefox 11.1v Lipo (hidden in stock tube) Total- $1,020 + shipping from various stores. Link to post Share on other sites
-=OGGY=- Posted February 6, 2010 Report Share Posted February 6, 2010 (edited) Thank you. On that note. A couple of updates on my Magpul-LaRue GBBR, "Live Free or Die, with an Unfair Advantage" That gun if perfect. Seriously... wow. Can I ask how much you spent on that beauty? (Not counting accesories?) -OGGY EDIT: I think a Surefire flashhider would look perfect on it. (The only thing I would change) Edited February 6, 2010 by -=OGGY=- Link to post Share on other sites
Kiki-Jiki Posted February 7, 2010 Report Share Posted February 7, 2010 Kind of pales in light compared to some of the nice rifles being thrown around here, but I really like the look and feel of mine. Though I'm still considering a black PEQ-15.... Link to post Share on other sites
fiddlesticks4220 Posted February 7, 2010 Report Share Posted February 7, 2010 (edited) Kiki, that gun is EPIC WIN, I want to build something VERY similar. That's the G&P MK18 rail? Edited February 7, 2010 by fiddlesticks4220 Link to post Share on other sites
RacingManiac Posted February 7, 2010 Report Share Posted February 7, 2010 slapping the AFG on my short upper, I really like the feel of it....probably have to buy another one... Link to post Share on other sites
Kiki-Jiki Posted February 7, 2010 Report Share Posted February 7, 2010 Kiki, that gun is EPIC WIN, I want to build something VERY similar. That's the G&P MK18 rail? Thanks dude. The rail is actually ACM (some replica...). Wish I could say it was the G&P, the G&P I had before was really nice. I basically had to re-thread the threads on the Magpul receiver with the stupid ACM barrel nut to get this rail on... but at least it'll stay really tight now lol. Link to post Share on other sites
Noveske Posted February 7, 2010 Report Share Posted February 7, 2010 That gun if perfect. Seriously... wow. Can I ask how much you spent on that beauty? (Not counting accesories?) -OGGY EDIT: I think a Surefire flashhider would look perfect on it. (The only thing I would change) Lol... I lost count along the way. Here's a list of the parts, I guess you can kind of figure out the math: -Prime Magpul lower receiver (came in a set with the upper) -Prime VLTOR MUR-1 upper receiver -RS Magpul UBR -RS LaRue LT15-9 (9.0) -RS Magpul MIAD -RS Magpul BUS -G&P lower receiver internal parts (hammer, trigger, buffer, etc) -G&P Ambi-Mag catch -Airsoft Surgeon VLTOR aluminum bolt carrier -G&P Nozzle -Prime Barrel extention -Prime Hop-up chamber (AEG inner barrel compatible) -KM 6.04 tightbore inner barrel -Prime Noveske 12.5" Stainless Steel Barrel -Prime Noveske Stainless Steel Gas Block & Gas tube -RS M16A2 Flashider -RS FAB Polymer Dust Cover Accessories (currently) -RS EOTech 551 w/ LaRue ECOS-C Riser -RS Magpul AFG-1 -RS Streamlight TLR-1 -PEQ-15 Dummy I tried several different flashiders, including the Surefire one, but I went with the same look LaRue did with their 9.0 rail/12.5" stainless barrel setup: the original A2 flashider. The Surefire one seemed a bit too long. I would probably use it on a 10.5" barrel setup. But then again I guess it's all personal preference. Link to post Share on other sites
BrooklynBorn Posted February 7, 2010 Report Share Posted February 7, 2010 :o Man, I wish I had a money tree like you. Link to post Share on other sites
kingdong Posted February 7, 2010 Report Share Posted February 7, 2010 my new setup that was built over the weekend, sorry about the poor quality though .G&P gearbox .G&P magpul receiver .magpul moe stock .magpul moe handgaurd .magpul moe pistol grip .Chinese replica holo sight still got to get a CTR stock, a new taclight and some king arms hi-cap pmags Link to post Share on other sites
Dickens Posted February 7, 2010 Report Share Posted February 7, 2010 That Eo tech looks gold??? Link to post Share on other sites
kingdong Posted February 7, 2010 Report Share Posted February 7, 2010 correct . Link to post Share on other sites
kingdong Posted February 7, 2010 Report Share Posted February 7, 2010 it looks really gold because of the phone camera flash its not that bad in person. Link to post Share on other sites
MinAmmo Posted February 9, 2010 Report Share Posted February 9, 2010 Magpul'd 416 (Grip and Ladder rail covers) G&P M4 Sentry ( Magpul Grip, MOE stock, Trigger Guard, Rail Covers) Link to post Share on other sites
Recommended Posts