TheFull9 Posted September 12, 2010 Author Report Share Posted September 12, 2010 Looks bloody good RM, how's it shoot? Any chance of a parts list? Link to post Share on other sites
RacingManiac Posted September 12, 2010 Report Share Posted September 12, 2010 (edited) Looks bloody good RM, how's it shoot? Any chance of a parts list? Â Thanks dude! Enjoy... http://www.arniesairsoft.co.uk/forums/index.php?app=gallery&module=images§ion=viewimage&img=13218 Edited September 12, 2010 by RacingManiac Link to post Share on other sites
reaper16 Posted September 12, 2010 Report Share Posted September 12, 2010 Really? I bought the 12" BigDragon version - Looked very nice, but the edges of the rails were RAZOR sharp (i cut my hand a few times trying to install it), and the inside of the rail was totally unfinished - All the shards of metal were still hanging off where the vent holes had been drilled, which scratched my outer barrel up a fair bit... It did look good, but the finishing was awful. That, and it wasn't designed for G&P threading, hence i never managed to fit it. Â Mine didnt have that issue, also most rails arent made for G&P threading so that isnt really relevant Link to post Share on other sites
uscmCorps Posted September 13, 2010 Report Share Posted September 13, 2010 I lent my good photography lights to a friend for a photo shoot so I had to take these outdoors. Not the greatest pics, but they'll do for now.  This is, what I believe, is the first (and so far only) KAC SR-25 EM-C.  A close up of the modified gas block:  Click either pic for much larger version.  The base gun was an Ares XM110 SASS (long version). Very much inspired by Titleist's RS SR-25 EM-C. It took a while, but I'm pretty happy with the finished result.  Kit list: • Ares XM110 SASS (modified externally) • Knight Armament Rear 600m BUIS • Knight Armament Rail Panels (stippled by BoreSight Solutions) • Knight Armament Micro Mount • Knight Armament Micro Battery Cover • Aimpoint T-1 Micro • CQD Sling mount (on the left side of URX rail) • Magpul ACS • Magpul 7.62 cover • Magpul Rail Ladders • Magpul AFG (stippled by BoreSight Solutions) • Magpul ASAP • RS Buffer Tube assembly modified to accept lipos • Magpul PTS MIAD • Magpul PTS Enhanced Trigger Guard • G-MIC PEQ-15 with Green laser • Andax PEQ15 Pattern Projector • Element Dual Switch • Element Surefire Scout with ACM LaRue Mount  Still to do: • Gear Sector Scout Mount • Swap the Element Scout for my real Scout, and add a Surefire V-Series Head Link to post Share on other sites
ericfine50 Posted September 13, 2010 Report Share Posted September 13, 2010 (edited) wow - that is very nice. What is the Andax PEQ15 Pattern Projector? Thanks EDIT: figured it out.. thanks Edited September 13, 2010 by ericfine50 Link to post Share on other sites
uscmCorps Posted September 13, 2010 Report Share Posted September 13, 2010 They're just pattern generators that replace the default covers on the PEQ-15 laser: http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_Lasers_Andax_PEQ15_Pattern_Projector_Laser_Cover_Black.htm  They're not great, but they work. Heck ... they even work with my real PEQ-15. Link to post Share on other sites
ericfine50 Posted September 13, 2010 Report Share Posted September 13, 2010 Thanks for the info. I bet that real PEQ is very nice.. Link to post Share on other sites
aznriptide859 Posted September 13, 2010 Report Share Posted September 13, 2010 Oh that is so nice uscm. Â Looks like Titleist's build is taking the shooting community by storm Link to post Share on other sites
uscmCorps Posted September 13, 2010 Report Share Posted September 13, 2010 (edited) Thanks for the info. I bet that real PEQ is very nice.. It's good ... for my real guns. But for airsoft, these replicas are more than good enough. My buddy installed an IR laser in the second slot of my VFC PEQ-15, swapped the floodlight with an IR LED and function-wise it's basically the same as the real deal. Heck it's just as powerful as the real deal's high output mode. When I play airsoft with my PVS-14 I use the replica PEQ-15. When I shoot my real guns, I use the real PEQ-15. Gonna ask my friend to install an IR Laser in this replica too. Â Oh that is so nice uscm. Â Looks like Titleist's build is taking the shooting community by storm Thanks. Originally, I was building it more as an amalgam of both his and Chris' SR-25's. But as it evolved, it definitely went more towards Titleist's. His shooting philosophy is very akin to my own, hence why even my RS SR-15 is built similar to his. The layout of his rifles are very logical and efficient given the accessories and requirements of them. Edited September 13, 2010 by uscmCorps Link to post Share on other sites
ericfine50 Posted September 13, 2010 Report Share Posted September 13, 2010 very nice. I see on Ebay there are a few PEQs with IR Lasers... nice addition. Link to post Share on other sites
RacingManiac Posted September 13, 2010 Report Share Posted September 13, 2010 damn....when is someone going to make a 7.62mm AR GBBR..... Â That looks amazing.... Link to post Share on other sites
aznriptide859 Posted September 13, 2010 Report Share Posted September 13, 2010 BTW, where is the pressure switch for the Scout Light located? Link to post Share on other sites
Reincarnation... Posted September 13, 2010 Report Share Posted September 13, 2010 The dual switch activates the PEQ15 and/or the Surefire Scout. Link to post Share on other sites
aznriptide859 Posted September 13, 2010 Report Share Posted September 13, 2010 I thought the other switch only worked with the Element M6x? Link to post Share on other sites
uscmCorps Posted September 13, 2010 Report Share Posted September 13, 2010 very nice. I see on Ebay there are a few PEQs with IR Lasers... nice addition. Honestly, those are WAY overpriced. Last time I looked they cost like $500 right? If you want one, get a ACM PEQ-15 for $40 shipped. Get an IR laser from RSOV or off eBay for a few bucks. And install it yourself or have an electrician do it for you. You can have a decent IR capable replica for under $150 including shipping and all labor. Â damn....when is someone going to make a 7.62mm AR GBBR..... That would rock! Â The dual switch is rewired to work with the Scout. The Scout has a different connector than what the Dual switch is designed for. Link to post Share on other sites
aznriptide859 Posted September 13, 2010 Report Share Posted September 13, 2010 Oh, gotcha pretty smexy job. Link to post Share on other sites
Titleist Posted September 13, 2010 Report Share Posted September 13, 2010 I swear I've seen a similar gun like that around here somewhere... Â Nice work, man. You know all the little things I'd point out that make it NOT an EMC, but all that considered, it looks a hell of a lot like my real battle rifle. I'm honored. Link to post Share on other sites
fiddlesticks4220 Posted September 13, 2010 Report Share Posted September 13, 2010 Link to post Share on other sites
RacingManiac Posted September 13, 2010 Report Share Posted September 13, 2010 VFC? Thats sweet looking.... Link to post Share on other sites
Fellowz Posted September 13, 2010 Report Share Posted September 13, 2010 this is depressing me, i have no money to trick out my M4 well a start would be to rewire the thing properly. Â is there anywhere i can get g&p upper recievers from? or am i out of luck as they only come in a set with a lower? Â ideally id like several rifles originating from 1 base gun to reduce costs on forking out for more than 1 AEG and the trimmings. Â so id like a short CQB ish carbine a Reece rifle and a DMR Link to post Share on other sites
uscmCorps Posted September 13, 2010 Report Share Posted September 13, 2010 You know all the little things I'd point out that make it NOT an EMC Unfortunately, there are certain obstacles that couldn't be circumvented to make this a perfect replica. But it's about as close as I can get. Â is there anywhere i can get g&p upper recievers from? or am i out of luck as they only come in a set with a lower? Couldn't you buy entire receivers and sell the lower? Or find a buddy that wants a lower and doesn't need the upper and split the cost? Link to post Share on other sites
hwagan Posted September 13, 2010 Report Share Posted September 13, 2010 Mine didnt have that issue, also most rails arent made for G&P threading so that isnt really relevant  I know, i was just mentioning why i never ended up using it... Still, mine was practically unfinished - It really did look nice, the trades were nicely done and so was the paintwork - But the pointy bits of metal all over the inside and the razor edges of the rails were pretty much dangerous... Still, ACM and all, chances are mine was one that went past a sleeping QC guy i guess...  Anyhoo, i picked up an ACM Eotech, and decided to chuck the PEQ on my MRP - I quite like the M4 being more streamlined and the MRP looking a bit chunkier... Better pictures when there's more natural light and i've got a better camera than the one on my phone..   Link to post Share on other sites
lambolurker Posted September 13, 2010 Report Share Posted September 13, 2010 I lent my good photography lights to a friend for a photo shoot so I had to take these outdoors. Not the greatest pics, but they'll do for now.  This is, what I believe, is the first (and so far only) KAC SR-25 EM-C. http://img175.imageshack.us/img175/8948/aressr25emc03sm.jpg  A close up of the modified gas block: http://img215.imageshack.us/img215/754/aressr25emc02lg.jpg"]http://img46.imageshack.us/img46/6977/aressr25emc02sm.jpg[/im  Click either pic for much larger version.  The base gun was an Ares XM110 SASS (long version). Very much inspired by Titleist's RS SR-25 EM-C. It took a while, but I'm pretty happy with the finished result.  Kit list: • Ares XM110 SASS (modified externally) • Knight Armament Rear 600m BUIS • Knight Armament Rail Panels (stippled by BoreSight Solutions) • Knight Armament Micro Mount • Knight Armament Micro Battery Cover • Aimpoint T-1 Micro • CQD Sling mount (on the left side of URX rail) • Magpul ACS • Magpul 7.62 cover • Magpul Rail Ladders • Magpul AFG (stippled by BoreSight Solutions) • Magpul ASAP • RS Buffer Tube assembly modified to accept lipos • Magpul PTS MIAD • Magpul PTS Enhanced Trigger Guard • G-MIC PEQ-15 with Green laser • Andax PEQ15 Pattern Projector • Element Dual Switch • Element Surefire Scout with ACM LaRue Mount  Still to do: • Gear Sector Scout Mount • Swap the Element Scout for my real Scout, and add a Surefire V-Series Head    About time brother! That is SWWWWEEEEEEEEEEEEEET!  I want to take on a similar project but I don't have a reliable machinist. You think you can hook me up? Link to post Share on other sites
uscmCorps Posted September 13, 2010 Report Share Posted September 13, 2010 I want to take on a similar project but I don't have a reliable machinist. You think you can hook me up? Possibly. Shoot me PM. Link to post Share on other sites
ERTrifleman Posted September 14, 2010 Report Share Posted September 14, 2010 Does anyone have a date for the rifle and midlength MOE handguards? I've called them and searched and all I get is Summer of 2010. Summer is almost over. Link to post Share on other sites
Recommended Posts