kingdong Posted October 26, 2010 Report Share Posted October 26, 2010 looks really good rich, what are you going to replace the pmags with? Link to post Share on other sites
RacingManiac Posted October 26, 2010 Report Share Posted October 26, 2010 (edited) Switcharoo on the flash hider, put the PWS style to the 11.5" upper, and using a modded Vltor style on the stubby so I can put a Halo on it... rip, wish I have 20 rd PMAG for GBBR....grr... Edited October 26, 2010 by RacingManiac Link to post Share on other sites
BrooklynBorn Posted October 26, 2010 Report Share Posted October 26, 2010 Finally the trigger guard!!! It looks so balanced now. Link to post Share on other sites
hwagan Posted October 27, 2010 Report Share Posted October 27, 2010 looks really good rich, what are you going to replace the pmags with? G&P STANAGS with magpuls... They make a nicer noise when reloading, which is the main thing. That and they're £11 a go at LandWarrior... Besides, the Pmags don't feed in my MRP without a bit of rubber glued in the back of the magwell, which annoys me. Link to post Share on other sites
G-rar Posted October 27, 2010 Report Share Posted October 27, 2010 Very nice racingmaniac! Link to post Share on other sites
Pdubyuh Posted October 27, 2010 Report Share Posted October 27, 2010 Racing maniac you have some very nices guns there, I have a query regarding the sight and mount on the Larue I've been looking for a nice little site for my sentry and that looks like it would fit the bill (please don't tell me its an RS job). Link to post Share on other sites
hwagan Posted October 27, 2010 Report Share Posted October 27, 2010 Racing maniac you have some very nices guns there, I have a query regarding the sight and mount on the Larue I've been looking for a nice little site for my sentry and that looks like it would fit the bill (please don't tell me its an RS job). I'm almost certain he mentioned it's an RS Larue Irondot... You can get a similar sight in cheaper, clone form - Look for a replica Docter sight (spelt with the e) - They look very similar, all you'll need is a mount and it won't break the bank. Link to post Share on other sites
RacingManiac Posted October 27, 2010 Report Share Posted October 27, 2010 Yeah, and in fact I'd probably recommand it....the sight has its issues. Might need a new battery but its auto adjustment is useless in pitch dark for some reason. Link to post Share on other sites
Pdubyuh Posted October 28, 2010 Report Share Posted October 28, 2010 Thanks for that guys of to google now Link to post Share on other sites
RacingManiac Posted October 28, 2010 Report Share Posted October 28, 2010 (edited) Actually I just noticed a typo, above post I wanted to say I'd recommend AGAINST it... Edited October 28, 2010 by RacingManiac Link to post Share on other sites
BigBabyMoses06 Posted October 28, 2010 Report Share Posted October 28, 2010 (edited) Edited October 28, 2010 by BigBabyMoses06 Link to post Share on other sites
TheFull9 Posted October 30, 2010 Author Report Share Posted October 30, 2010 Well, it's taken a fair old amount of time to get this put together, but I can finally say it's about done, certainly externally at least. Like to say a quick thanks to Racingmaniac and Noveske for answering all my questioning PMs to help me get this all put together. The idea behind this project was taken from the desire to have a set of different uppers for your AR-15, all to use with just the one lower reciever, giving you essentially multiple guns but for a lot less money and space/weight to carry to your skirmish field. Problem of course that AEGs aren't entirely practical for this purpose, whereas GBB rifles are much better suited. So with this in mind, and since I have already invested a fair bit of money and time in to learning and using the WA system, I went ahead and built this lot. Works out to 2 and a half guns technically, but I don't quite think of it that way. Admittedly, WA has its' problems no one can deny that, but with the amount of after market support it just suited what I wanted to do; anyway, on with the pictures. The Magpul stuff and the Larue clips are pretty much the only RS stuff, so anything else not listed with as being made by an airsoft manufacturer is G&P. Lower Receivers Primary Lower: Magpul type lower receiver Full set of steel lower internal parts Anti-Rotation links PTS ASAP plate for GBBRs CTR Stock 0.70" Buttpad MIAD Grip (Standard plug base with 3 x Magpul plastic 5.56 rounds) G&P VLTOR Style buffer tube RS Buffer tube locking ring RS Buffer + Standard spring Backup Lower: Troy type lower reciever Standard aluminium lower internals set Dual QD sling hook end plate MOE Stock MOE Grip MOE Trigger guard G&P VLTOR Style buffer tube Standard buffer unit and spring Link to post Share on other sites
TheFull9 Posted October 30, 2010 Author Report Share Posted October 30, 2010 Upper Receivers Night-Ops CQB Upper: MUR Upper 9" DD Lite Rail 10.5" Outer Barrel King Arms KAC Gas Blocl/Front Sight KAC TTB Fake gas tube Troy rear BUIS RVG VFC PEQ-15 Element M3x Element Dual-Switch LaRue Index Clips Ladder rail cover G&P M2 Aimpoint Rubber Aimpoint cover Element LaRue CCO Mount Chinese 3x Aimpoint Magnifier Bomber LaRue Flip-to-Side mount Skirmisher Intermediate Upper: MUR Upper Steel forward assist Barrel Nut/Delta Ring set 12" Aluminium Outer Barrel VLTOR low-profile style gas block King Arms Carbine length fake gas tube TM Handguard Cap Vortex Flash Hider MVG MOE Handguard Element Eotech 551 Chinese 4x Eotech magnifier Chinese FTS Magnifier mount Battle Carbine Upper: MUR Upper Standard barrel nut 9" MRF 14.5" Aluminium Outer Barrel VLTOR Gas Block/Front BUIS VLTOR Flash Hider Element PEQ-16 Element Tape switch ERGO Pressure switch mount Ladder rail covers PTS XT Rail cover Action Grip-Pod Rear MBUS Chinese SpectreDR Link to post Share on other sites
kingdong Posted October 30, 2010 Report Share Posted October 30, 2010 good work mate they all look top notch Link to post Share on other sites
Azulsky Posted October 30, 2010 Report Share Posted October 30, 2010 Wow great work Really digging the "Night Ops CQB" Upper Link to post Share on other sites
TheFull9 Posted October 30, 2010 Author Report Share Posted October 30, 2010 good work mate they all look top notch Wow great work Really digging the "Night Ops CQB" Upper Thanks very much guys, appreciated. I'll put some combinations together for pictures if there's any call for them. Link to post Share on other sites
Eugene_Stoner Posted October 30, 2010 Report Share Posted October 30, 2010 very well done, did a similar thing myself but had to sell some bits due to them not getting the use Link to post Share on other sites
Recommended Posts