kojak Posted January 20, 2010 Report Share Posted January 20, 2010 Cheers the fug I ordered is actually the "deluxe" one aswell one from ebb (with the extra bottom bits) and after a bit of filing I managed to get it fitting just fine. Good to hear; I forgot that I put some electrical tape on the rail interface when I first got it--it's been solid as a rock ever since, though I've switched it around dozens of times. Also, be careful with the shortest plug if you like to keep emergency items inside, mine tightened itself during use and I needed channel locks to get it off. I was about to buy another one before I saw the photos of the new Magpul VFG--looks like the FUG and MIAD had a baby. Pradal-Serey, did you put heat-shrink on your FUG or bits of bicycle inner tube? More kudos on your guns, love the DBAL. Link to post Share on other sites
veratek Posted January 20, 2010 Report Share Posted January 20, 2010 (edited) woozie that paintjob is something special. It looks 100% pro, and I can't believe how effective the camo looks in those pics. very nice man. Edited January 20, 2010 by veratek Link to post Share on other sites
Hispeed1 Posted January 20, 2010 Report Share Posted January 20, 2010 thanks that's what i've been thinking about, but i'm waiting for a good quality 16" outer barrel for gbbr They look great as they are-I just made that suggestion so you can have a long and short GBB M4. Link to post Share on other sites
TheFull9 Posted January 20, 2010 Author Report Share Posted January 20, 2010 yeah it works. I used a MOE on my kwa, and it should fit any standard carbine length m4's with delta ring. You will have to remove the steel insert (it's meant to be removable). The only thing is, I had to do some light sanding/chipping around the fittings, otherwise it was too tight a fit. Awesome, cheers mate. Whereabouts did you have to remove material on yours to fit it? Link to post Share on other sites
Pradal-Serey Posted January 20, 2010 Report Share Posted January 20, 2010 Pradal-Serey, did you put heat-shrink on your FUG or bits of bicycle inner tube? More kudos on your guns, love the DBAL. It is bicycle inner tube They look great as they are-I just made that suggestion so you can have a long and short GBB M4. oh I see one is AEG (the one with magpul receiver) the other is Gbbr, I have to keep it that way if I want to play during winter. Also I tried putting the eotech magnifier with the Micro T1, the eye relief & co witness is fair, view is clear, but If I had to choose, I would rather go with the pivot mount (the target acquisition is slightly faster) Link to post Share on other sites
[-=O=-]^{Woozie} Posted January 20, 2010 Report Share Posted January 20, 2010 and I can't believe how effective the camo looks in those pics indeed Link to post Share on other sites
veratek Posted January 20, 2010 Report Share Posted January 20, 2010 Awesome, cheers mate. Whereabouts did you have to remove material on yours to fit it? right around here on the top-handguard. This gap was too narrow to slide the front ring into. Link to post Share on other sites
ctres94 Posted January 20, 2010 Report Share Posted January 20, 2010 @ predal-serey: okay, thanks for the info: It'll be good to know when I order mine. Link to post Share on other sites
CplHicks Posted January 20, 2010 Report Share Posted January 20, 2010 The PMAG's have cracked the lower receiver in another place. Link to post Share on other sites
Pkekyo-Nor Posted January 20, 2010 Report Share Posted January 20, 2010 ...there's a reason we don't stuff PMAGs in our HK416s... Link to post Share on other sites
Reincarnation... Posted January 21, 2010 Report Share Posted January 21, 2010 ...there's a reason we don't stuff PMAGs in our HK416s... Yepp. And thus the reason for Magpul's E-mag. Link to post Share on other sites
hugh_b Posted January 21, 2010 Report Share Posted January 21, 2010 With regards to the afg, i've seen it fitted to a RS moe hand guard so assuming it will fit the pts handguard. Does it need a rail the full length of the handguard? I have a 115mm, same spec as magpul pts rails to go on the under side but the afg is longer, will it matter if it mounts to a shorter rail? Hugh Link to post Share on other sites
nasty-nate Posted January 21, 2010 Report Share Posted January 21, 2010 i've fitted mine onto a rail that's no more than 4 inches long, so i assume your 115mm rail should work just fine. nice piece of kit if i do say so myself only need my MBUS to come in, and hopefully pay for a MIAD shortly, and i'll be done my blaster.... for now Link to post Share on other sites
Reincarnation... Posted January 21, 2010 Report Share Posted January 21, 2010 (edited) After a long time of procrastinating and excuses for not finish my build, I am now finally finish. I call it a M7N4, sounds like a influenza virus to be honest. Still want a torch for it, still undecided on model and finish of the light. Recommendations are welcomed. Parts List: *G&P Noveske N4/MUR metal body kit *King Arms M7A1 RAS *King Arms Noveske-style flashinder *PMC Tactical low profile gas block with Noveske trades *Magpul PTS MIAD inf FDE *Magpul PTS Enhanced Trigger Guard *King Arms M7A1 QD sling mount *Magpul PTS 120rnd magazines in FDE (6x) *RS Magpul CTR in FDE *RS Tango Down QD Stubby Fore Grip in FDE *RS Magpul XT rail cover in FDE *RS Magpul/Falcon Ladder rail cover in FDE *RS Troy/Noveske M4-style BUIS in FDE *RS Aimpoint Micro T1 on Larue LT-660HK mount *RS Noveske "Suprise C*** Fag!!" dust cover *RS Magpul Pmag Ranger Plates in Blk (6x) *RS Vicking Tactics Wide Padded Sling in CB Edited January 21, 2010 by Reincarnation... Link to post Share on other sites
BrooklynBorn Posted January 21, 2010 Report Share Posted January 21, 2010 After a long time of procrastinating and excuses for not finish my build, I am now finally finish. I call it a M7N4, sounds like a influenza virus to be honest. Still want a torch for it, still undecided on model and finish of the light. Recommendations are welcomed. Parts List: *G&P Noveske N4/MUR metal body kit *King Arms M7A1 RAS *King Arms Noveske-style flashinder *PMC Tactical low profile gas block with Noveske trades *Magpul PTS MIAD inf FDE *Magpul PTS Enhanced Trigger Guard *King Arms M7A1 QD sling mount *Magpul PTS 120rnd magazines in FDE (6x) *RS Magpul CTR in FDE *RS Tango Down QD Stubby Fore Grip in FDE *RS Magpul XT rail cover in FDE *RS Magpul/Falcon Ladder rail cover in FDE *RS Troy/Noveske M4-style BUIS in FDE *RS Aimpoint Micro T1 on Larue LT-660HK mount *RS Noveske "Suprise C*** Fag!!" dust cover *RS Magpul Pmag Ranger Plates in Blk (6x) *RS Vicking Tactics Wide Padded Sling in CB So how is it? I hope you own real firearms, at least for the Micro. Link to post Share on other sites
Genome Posted January 22, 2010 Report Share Posted January 22, 2010 What rail length would you guys suggest if you have a 14" outer barrel? I would like to cover the most of the outer barrel with just a little space left. I was thinking a 11" or is that too much? maybe a 9? Link to post Share on other sites
aznriptide859 Posted January 22, 2010 Report Share Posted January 22, 2010 ^11.0" would be perfect - 12.0" would even be OK. Reincarnation, that is pure sechs - amazing job. Link to post Share on other sites
Genome Posted January 22, 2010 Report Share Posted January 22, 2010 Awesome thanks Im sold on the 11" then. Btw aznriptide do you have your link to the ACM installation that you had? I cant seem to find it anymore Link to post Share on other sites
aznriptide859 Posted January 22, 2010 Report Share Posted January 22, 2010 For the rail? It's in my review: http://www.airsoftretreat.com/forums/index.php?topic=88952.0 Link to post Share on other sites
Genome Posted January 22, 2010 Report Share Posted January 22, 2010 woot thanks a bunch! Link to post Share on other sites
bluntshooter Posted January 22, 2010 Report Share Posted January 22, 2010 Amazing paint job man, did your friend air brushed that or used some other medium? that's all hand painted with a brush. couple days' hard work and paitence Link to post Share on other sites
MRF Posted January 22, 2010 Report Share Posted January 22, 2010 (edited) Hi folks. Just some newbie, aesthetics-related issue. Does Magpul PTS body with long extension (discontinued one) have laser made, white markings on the top rail ? I'm asking because I haven't found on web any single photo answering this question. Only thing I know is short extension variant has those markings for sure. Edited January 22, 2010 by MRF Link to post Share on other sites
Johnny Mad Posted January 22, 2010 Report Share Posted January 22, 2010 thats amazing Bluntshooter! i am still in awe but it! Link to post Share on other sites
MS3 Race Posted January 22, 2010 Report Share Posted January 22, 2010 (edited) What rail length would you guys suggest if you have a 14" outer barrel? I would like to cover the most of the outer barrel with just a little space left. I was thinking a 11" or is that too much? maybe a 9? http://www.laruetactical.com/pics/StealthU...heetsmaller.jpg Keep in mind that that image is only reference for the larue rails, and any other rails will be slightly different. Click on picture to enlarge it. Edited January 22, 2010 by MS3 Race Link to post Share on other sites
Genome Posted January 22, 2010 Report Share Posted January 22, 2010 Action just released a series of Larue rails. these come with a outer barrel set but this would not cover the inner barrel length am I correct? This is one of the rails. http://shop.ehobbyasia.com/accessories/r-i...for-m4-aeg.html I have a standard length M4 which I believe is a 14" inner barrel. I never been so confused before. I do want an action one though since they seem to provide lots of stuff Link to post Share on other sites
Recommended Posts