beta08 Posted May 12, 2010 Report Share Posted May 12, 2010 (edited) That would be the PTS. I believe a "First Impressions" is in order. EDIT: Just kidding. Edited May 12, 2010 by beta08 Link to post Share on other sites
Deepeyes Posted May 12, 2010 Report Share Posted May 12, 2010 Took me about 4 different paints before I finally got the 203 to match. Link to post Share on other sites
Slayer750 Posted May 12, 2010 Report Share Posted May 12, 2010 [image] Took me about 4 different paints before I finally got the 203 to match. Looks amazing though! Great job! Link to post Share on other sites
hwagan Posted May 12, 2010 Report Share Posted May 12, 2010 @Deepeyes; That's possibly the first tan gun i'd actually consider owning! Colour scheme looks the balls. G&P Sentry for the base gun? Also, My newly rebuilt G&P/Magpul M7A1; Used to look like this... And now it looks like this... Although i've since gone back to the KX3, as the AAC silencer/flash hider looks far better on my MRP. Link to post Share on other sites
Deepeyes Posted May 12, 2010 Report Share Posted May 12, 2010 Cheers guys. it is a G&P sentry as the base. I use to hate tan as well, but this thread made them grow on me Link to post Share on other sites
Isamu Posted May 12, 2010 Report Share Posted May 12, 2010 @Deepeyes; That's possibly the first tan gun i'd actually consider owning! Colour scheme looks the balls. G&P Sentry for the base gun? Also, My newly rebuilt G&P/Magpul M7A1; Used to look like this... Although i've since gone back to the KX3, as the AAC silencer/flash hider looks far better on my MRP. very nice, much better without silencer, I would just add an ASAP sling swivel and a magpul or Knights trigger guard Link to post Share on other sites
hwagan Posted May 12, 2010 Report Share Posted May 12, 2010 Thanks dude Magpul trigger guard for the M7 and my MRP are both on the next paycheque - Although i've never really felt the need for the ASAP, i get on quite well with the basic receiver plate mount... My weapons are only really slung between games, so it's £40 i don't really need to spend. As for the silencer, i agree entirely - I do quite like the 'SD' style look it gives, but it's much easier to maneuvere with the KX3 amplifier, and it also makes a hell of a crack =D Link to post Share on other sites
kingdong Posted May 12, 2010 Report Share Posted May 12, 2010 speaking of the G&P sentry this used to be one just an update on some new bits, next ill need a black AFG i was going to get a black CTR stock with a FDE cheek riser but the LE stock has grown on me. Link to post Share on other sites
Fellowz Posted May 12, 2010 Report Share Posted May 12, 2010 anyone got any pics of FDE and OD being used on 1 rifle? need some inspiration. Link to post Share on other sites
BrooklynBorn Posted May 12, 2010 Report Share Posted May 12, 2010 Quick google search, if you're looking for comparison. Link to post Share on other sites
Fellowz Posted May 12, 2010 Report Share Posted May 12, 2010 im thinking of doing this see. it matches closley to the colours of my new norwiegan camo Link to post Share on other sites
Titleist Posted May 12, 2010 Report Share Posted May 12, 2010 (edited) Quick google search, if you're looking for comparison. Robb (Jensen) has some awesome rifle configs if you dig around. And that guy can friggin SHOOT! Amazing 3-gunner. Edited May 12, 2010 by Titleist Link to post Share on other sites
Scuffer Posted May 12, 2010 Report Share Posted May 12, 2010 Nice! The simplicity of the block colours make it look sharp 'Corps. Link to post Share on other sites
bOp Posted May 13, 2010 Report Share Posted May 13, 2010 Finally done - hope to never repeat for a good while! Link to post Share on other sites
jgarnreiter Posted May 13, 2010 Report Share Posted May 13, 2010 Finally done - hope to never repeat for a good while! Was getting the XTM Panels on your Noveske RIS as much of a pain for you as it was for me? I feel like the rails are just slightly thicker than most, and it drives me crazy. Link to post Share on other sites
Fellowz Posted May 13, 2010 Report Share Posted May 13, 2010 quick question on the NOVESKE front end. is there any way of getting a gas tube to go through it? im sure that there is an adapter with the front end that eliminates the need for a gas tube/block Link to post Share on other sites
uscmCorps Posted May 13, 2010 Report Share Posted May 13, 2010 quick question on the NOVESKE front end. is there any way of getting a gas tube to go through it? im sure that there is an adapter with the front end that eliminates the need for a gas tube/block You can use gas tubes with the Noveske rails. Madbull inserted a pin at the rear of the rail in an attempt to prevent you from using gas tubes, but you can punch that pin out very easily. Link to post Share on other sites
bOp Posted May 13, 2010 Report Share Posted May 13, 2010 (edited) Was getting the XTM Panels on your Noveske RIS as much of a pain for you as it was for me? I feel like the rails are just slightly thicker than most, and it drives me crazy. It wasn't too bad. I did have a little trouble fitting them as it seems the rail is a bit thicker, but if you squeeze hard enough they clip together easy enough. Shame they can't go over the QD mount holes as I wanted to cover the whole rail with the panels. quick question on the NOVESKE front end. is there any way of getting a gas tube to go through it? im sure that there is an adapter with the front end that eliminates the need for a gas tube/block If you cut/remove the little metal block/tab (Can't think of a name for it ) going vertically across the back of the rail at the top inside, yes you can fit the gas tube. Edited May 13, 2010 by bOp Link to post Share on other sites
Fellowz Posted May 13, 2010 Report Share Posted May 13, 2010 sweet as. just got a delivery of OD goods, im trying to get a hold of some FDE MIAD pannels so i can mix and match as in my above picture. the OD Krylon isn't quite a Magpul OD but it works fine on my stippled grips. just need to get a few XTM pannels and P/E mags and im set, maybe an AFG if i can find them in OD. sorry, crappy phone pics. Link to post Share on other sites
Chevieblazer Posted May 14, 2010 Report Share Posted May 14, 2010 Always wondered what a magpulled AR would look like with some heavy wear...I kinda like it... Link to post Share on other sites
fiddlesticks4220 Posted May 15, 2010 Report Share Posted May 15, 2010 Link to post Share on other sites
TheFull9 Posted May 16, 2010 Author Report Share Posted May 16, 2010 sweet as. just got a delivery of OD goods, im trying to get a hold of some FDE MIAD pannels so i can mix and match as in my above picture. the OD Krylon isn't quite a Magpul OD but it works fine on my stippled grips. just need to get a few XTM pannels and P/E mags and im set, maybe an AFG if i can find them in OD. sorry, crappy phone pics. *snip* OD! Nice. PTS is still yet to do an AFG in olive drab I'm afraid, and personally I highly doubt they ever will, since they obviously don't sell much of said colour and just don't bother producing it any more. You can however pickup the real thing in the colour you're after: http://www.midwayuk.com/apps/eproductpage.exe/showproduct?SaleItemID=972824 Pretty pricey from the UK though unfortunately, and most American places won't ship outside the states. Link to post Share on other sites
Recommended Posts