Magpul Picture Thread

[AnotherJesus]

I'm a big fan of what you've done there Kojak.

[BigAl]

I would go one step further ans add an Ergo Grip and HK416 Sights to further blur the PDW / HK MP5K Line.

[kojak]

Thanks guys.

 

That actually looks very good. Just needs a different optic.

 

 

Definitely. I ordered a shorter AD "cowitness" mount for the T-1, but something nicer might be in the works.

 

At least he's not using Pmags lol.

I think it looks good. But i drink the Magpul kool aid.

 

 

It's a WE, so PMAGS are pretty hard to come by but I would probably use them if I could.

[crackisbad]

Your dead on.

Yah, i used a rail, idk how to lower the sight down to the rear sights proper alignment. Any suggestions?!

 

This was exact problem I ran into, here is my solution; JP Rifle rails:

(color tones are not that off in person, I guess it's just a bit camera shy)

 

That rail is a lot lower than the MOE rail but even still it's not quite perfect. I will have to grind down 2-3mm and then I think they will line up perfectly!

[Mr Foxhound]

Pretty hard to tell. Never met an airsofter who used flip up sights. Why we have optics.

 

I only did once because my chinese EOtech was very crappy.

 

Oh yeah. Gun looks amazing to. Need a black MAID

Edited July 7, 2010 by Mr Foxhound

[crackisbad]

Yea, it's not so much because I'll use them, it's more because I'm OCD

[talon_0315]

This was exact problem I ran into, here is my solution; JP Rifle rails:

 

How'd you get the mid-length MOE handguards? I don't believe those are out yet.

[hwagan]

My money is on ACM ones - They've been out a couple of months now i think.

[GrenadierMasada]

This was exact problem I ran into, here is my solution; JP Rifle rails:

 

(color tones are not that off in person, I guess it's just a bit camera shy)

 

That rail is a lot lower than the MOE rail but even still it's not quite perfect. I will have to grind down 2-3mm and then I think they will line up perfectly!

 

 

 

What about the Magpul RS Polymer rails made specifically for the MOE handguard?

 

 

And i would actually use my sights to at least give me quick acquisition, and plus, in order to zero your red dot you need iron sights.

Edited July 8, 2010 by GrenadierMasada

[Short Stack]

What about the Magpul RS Polymer rails made specifically for the MOE handguard?

 

 

And i would actually use my sights to at least give me quick acquisition, and plus, in order to zero your red dot you need iron sights.

 

lolwut?

 

You specifically DON'T want to zero your dot sight off of irons.

You choose a specific range(100 feet persay) and adjust the clicks on your dot sight till your BB's hit the target specifically there at that range.

[SteevoLS]

Those are definitely the ACM handguards. The real ones aren't out yet, and those have indeed been out for a month or two. Mine had some fitment issues, but there is something to be said for being the only guy in the region with that particular setup.

[BigAl]

Is that the mid length not rifle length? If I wanted to fit one of these and an A Frame sight with the flash suppressor right up against it what barrel would I need? Would it be a custom length?

[hwagan]

I'm almost certain that barrel is a 10.5" going on the rough proportions of it, so i'd guess if you wanted to use the a-frame gas block you'd need an 11.5/12" barrel - That's an educated guess though.

 

 

[hwagan]

Apologies for the double post - Just finished this build - In about 15 minutes... God i love working with G&P parts;

 

 

 

Base gun was a colt bodied G&P M4A1, re-wired for a buffer tube lipo by Landwarrior when i purchased it - Added a G&P Mk18 RISII rail, KA Troy sights, G&P Troy flashhider, PTS FG MOE, ACM XTM's, G&P T-1 on a Dytac mount. CTR is from my MRP - I'm waiting on an OD ACM CTR and an OD ACM AFG 'n all to finish it off.

Edited July 8, 2010 by hwagan

[crackisbad]

Is that the mid length not rifle length? If I wanted to fit one of these and an A Frame sight with the flash suppressor right up against it what barrel would I need? Would it be a custom length?

 

Are you talking about mine? If you are; The handguards are the ACM mid length of about 9 or 10 inches and my barrel is a 12" barrel but the actual length (from the front of the upper to the other end is 11". If you want, I can measure at what point on the barrel the delta ring sits and let you know.

[reaper16]

Pic request :

 

DD 9in lite rail + 14 inch barrel

 

Noveske 10 in rail with 14 inch barrel

 

thanks in advance

reaper

[BrooklynBorn]

 

Quick google.

[reaper16]

thats the RIS 2 not the Lite rail(its half an inch longer), but thanks that does help.

[BrooklynBorn]

You should check RS forums picture threads. They're littered with pics of Lite rails and 16in barrels (14.5 but 16 w/ a pinned FH or brake)

[SteevoLS]

On a side note, those pics helped me. I had no idea you could fit a smaller lipo in one of those.

[-MOOSE-]

On another side note, those pics also helped me Because I like how the rail looks in conjunction with the MagPul stock and MIAD, something I haven't seen before but been really interested in doing myself. Thanks a lot!

[raj_uk]

Am I going to Magpul hell for this pimpage of an FPG ? LOL

 

 

[Pkekyo-Nor]

Am I going to Magpul hell for this pimpage of an FPG ? LOL

 

 

 

Well, I can't speak to the hell-part,  but I'm fairly certain someone's going to track down and kill you for doing that

[fiddlesticks4220]

[darkeviloverlord]

dunno about an eotech on that fpg. doesnt seem to fit in with the covertness of a suitcase-gun. do you skirmish in secret service "fatigues" with that?